西藏冈底斯中段晚侏罗-早白垩世花岗岩特征

对西藏冈底斯中段1∶25万措麦区幅区域地质调查中新发现的侵入于晚古生代地层中被古近纪林子宗群火山岩喷发沉积不整合覆盖的尼雄超单元、许如错超单元进行了解体,划分了7个单元。许如错超单元同位素年龄值154.2 Ma±3.8 Ma(锆石U-Pb)、141 Ma(锆K-Ar),时代为晚侏罗世,尼雄岩体中获锆K-Ar法年龄值114 Ma、106 Ma,时代为早白垩世,其地球化学及同位素特征反应两岩体为过铝型高钾钙碱性壳幔混合型花岗岩,形成于活动陆缘火山弧构造环境,为大陆弧花岗岩,与雅江洋向北和班-怒洋向南俯冲有关。     

臭氧发生系统中半导体制冷干燥装置的研制

本文介绍了未经过干燥处理的原料气进入电晕放电臭氧发生系统后的危害机理 ,根据半导体的制冷干燥机理 ,开发研制了实验室用半导体制冷干燥装置 ,实验证明该装置的研制是成功的。     

Double-electrode arc welding process: Principle,variants, control and developments

Double-electrode gas metal arc welding (DE-GMAW) is a novel welding process in which a second electrode, non-consumable or consumable, is added to bypass part of the wire current. The bypass current reduces the heat input in non-consumable DE-GMAW or increases the deposition rate in consumable DE-GMAW. The fixed correlation of the heat input with the deposition in conventional GMAW and its variants is thus changed and becomes controllable. At the University of Kentucky, DE-GMAW has been tested/developed by adding a plasma arc welding torch, a GTAW (gas tungsten arc welding) torch, a pair of GTAW torches, and a GMAW torch. Steels and aluminum alloys are welded and the system is powered by one or multiple power supplies with appropriate control methods. The metal transfer has been studied at the University of Kentucky and Shandong University resulting in the desirable spray transfer be obtained with less than 100 A base current for 1.2 mm diameter steel wire. At Lanzhou University of Technology, pulsed DE-GMAW has been successfully developed to join aluminum/magnesium to steel. At the Adaptive Intelligent Systems LLC, DE-GMAW principle has been applied to the submerged arc welding (SAW) and the embedded control systems needed for industrial applications have been developed. The DE-SAW resulted in 1/3 reduction in heat input for a shipbuilding application and the weld penetration depth was successfully feedback controlled. In addition, the bypass concept is extended to the GTAW resulting in the arcing-wire GTAW which adds a second arc established between the tungsten and filler to the existing gas tungsten arc. The DE-GMAW is extended to double-electrode arc welding (DE-AW) where the main electrode may not necessarily to be consumable. Recently, the Beijing University of Technology systematically studied the metal transfer in the arcing-wire GTAW and found that the desired metal transfer modes may always be obtained from the given wire feed speed by adjusting the wire current and wire position/orientation appropriately. A variety of DE-AW processes are thus available to suit for different applications, using existing arc welding equipment.     

Modeling and simulation of arc: Laser and hybrid welding process

Welding is a fabrication process to join two different materials. Among the many welding processes, the arc and laser welding processes are the most widely used. Great effort is required to understand the physical phenomena of arc and laser welding due to the complex behaviors which include liquid phase, solid phase and, gas phase. So it is necessary to conduct numerical simulation to understand the detailed procedures of welding. This paper will present the various numerical simulation methods of the arc welding processes such as arc plasma, gas tungsten arc welding, gas metal arc welding, laser welding, and laser–arc hybrid welding. These simulations are conducted by the finite element method, finite differential method and volume of fluid method to describe and analyze the various welding processes.     

Microstructure and mechanical properties of alloy C-276 weldments fabricated by continuous and pulsed current gas tungsten arc welding techniques

Effects of switching over from gas tungsten arc welding (GTAW) to pulsed current gas tungsten arc welding (PCGTAW) on the quality of joints produced in Hastelloy C-276 material were investigated. Welding was carried out both by autogenous mode and using ERNiCrMo-3 filler wire. Microstructures of weld joints produced with and without current pulsing were studied using optical and scanning electron microscopy. Microsegregation occurring in GTAW and PCGTAW joints was investigated using energy dispersive X-ray spectroscopy (EDS). Strength and ductility of weld joints produced with and without pulsing were evaluated. The results show that pulsing results in refined microstructure, reduced microsegregation and improved strength of weld joints. Secondary phase(s) noticed in GTA weldments were found to be absent in PCGTA weldments. Autogenous PCGTA weldments were found to be the best in terms of: (i) freedom from microsegregation, (ii) strength and (iii) freedom from unwanted secondary phases.     

Metal-cored arc welding process for joining of modified 9Cr-1Mo (P91) steel

In the present work, metal-cored arc welding process was used for joining of modified 9Cr-1Mo (P91) steel. Metal-cored arc welding process is characterized by high productivity, slag-free process, defect-free weldments that can be produced with ease, and good weldability. Toughness is essential in welds of P91 steel during hydro-testing of vessels. There is a minimum required toughness of 47 J for welds that has to be met as per the EN1557:1997 specification. In the present study, welds were completed using two kinds of shielding gases, each composition being 80% Argon + 20% CO₂, and pure argon respectively. Microstructural characterization and toughness evaluation of welds were done in the as – weld, PWHT at 760 °C – 2 h and PWHT at 760 °C – 5 h conditions. The pure argon shielded welds (‘A2’ and ‘B2’) have higher toughness than 80% argon + 20% CO₂ shielded welds (‘A1’ and ‘B1’). Pure argon shielded welds show less microinclusion content with low volume fraction of δ-ferrite (<2%) phase. Themo-calc windows (TCW) was used for the prediction of equilibrium critical transformation points for the composition of the welds studied. With increase in post-weld heat treatment (PWHT) duration from 2 h to 5 h, there was increase in toughness of welds above 47 J. Using metal-cored arc welding process, it was possible to achieve the required toughness of more than 47 J after PWHT at 760 °C – 2 h in P91 steel welds.     

铝合金微弧氧化技术应用研究

目的研究铝合金微弧氧化技术在产品三防方面的应用。方法选取四种不同牌号的常用铝合金结构件材料进行微弧氧化处理,并通过各种检测手段测定铝合金微弧氧化膜层的成分及形貌、硬度及耐磨、耐腐蚀等性能指标,并与硬质阳极氧化技术作对比。结果微弧氧化膜层厚度为20～120μm,氧化膜致密层硬度（Hv）〉900,致密层磨损率〈10^-4mm^3／（N·m）,盐雾试验时间〉96h,湿热试验时间〉10个周期,膜层性能优于硬质阳极氧化膜。结论微弧氧化技术能大大提高铝合金的耐磨和耐腐蚀性能,可应用于提升产品三防性能。     

茅草街大桥主桥的地震反应分析

以湖南茅草街大桥为研究对象,采用大型有限元分析软件ANSYS建立了该钢管混凝土系杆拱桥的三维有限元模型并对其进行模态分析,在此基础上运用反应谱法计算了该桥的纵向、横向和竖向地震响应,探讨了主要结构参数对中承式钢管混凝土系杆拱桥地震响应的影响,可为大跨钢管混凝土拱桥的抗震设计提供理论参考。     

几种涂层氙弧灯光老化试验加速性研究

太阳辐射是引起有机材料老化的最主要原因,实验室氙弧灯光老化试验具有较高的加速性。本文通过对有机涂层在广州试验站自然暴露试验结果以及实验室氙弧灯光老化试验结果进行对比研究,得到3种常用有机防护涂层的加速倍数,对于1#、2#样品的加速倍数为9,3#样品的加速倍数为6。     

高压电弧放电处理偶氮染料废水

用高压电弧放电产生的低温等离子体对含偶氮染料的废水进行了处理，以甲基橙为例研究了电压幅值、处理时间、溶液初始浓度、溶液初始pH值、投加Fe^2＋和Fe^3＋对染料脱色的影响。实验结果表明，甲基橙浓度为50mg／L时其降解率随时间和电压幅值的增加而增加。溶液初始浓度对染料去除效果影响较为明显，同等条件下初始浓度越低降解率越高。酸性条件下有利于低温等离子体处理甲基橙。Fe^2＋和Fe^3＋对低温等离子体降解甲基橙有一定的催化作用。电压8kV处理3min，Fe^2＋为20mg／L时去除率由89．64％增至99．72％。Fe2（SO4），的最佳投加量为5mg／L（以Fe^3＋计），而FeCl，的最佳投加量为80mg／L（以Fe^3＋计）。