基于噪声指数的首都经济贸易大学校园声环境评价

文章在对首都经济贸易大学校园进行声功能区环境噪声监测的基础上,分析和计算了各区域测点噪声超标值（△LAeq）、噪声指数（LKZ）和噪声污染指数（PN）;从强度和影响人群人数两个角度评价校园声环境质量。结果表明,首都经济贸易大学校园声环境质量处于较差的水平,噪声强度超标率达到82％;据此,课题对校园噪声污染现状进行了影响分析和声环境质量的等级评定,最后针对污染现状提出了相关措施和建议。     

区域PTS海洋环境风险评价研究进展

目前,各种环境污染物严重威胁人类健康和生态系统,开展持久性有毒物质(PTS)的环境风险评价已成为当前环境领域的研究热点.本研究从区域尺度着手,简要介绍了在三种海洋介质(水体、沉积物以及生物体)中PTS的环境风险评价方法,包括:常用的风险商值法(如:PEC/PNEC比值法,Hakanson生态风险指数法、毒性效应区间低、...     

粒级、pH和有机质对汞在松花江沉积物表面吸附-解吸的影响

为进一步揭示汞在松花江沉积物表面的环境行为,通过模拟实验,研究粒级、pH和溶解性有机质(DOM)对汞在松花江沉积物表面吸附-解吸量的影响.结果表明,不同粒级沉积物的吸附能力差别较大,本实验条件下,沉积物粒级越小,其吸附能力越强.在各种浓度的实验设计组中均有:pH由3.5升高至4.5时,吸附量增加,当pH4.5时,随pH的继续升高吸附量开始降低;沉积物中汞的解吸量随pH的增加呈先下降后上升的趋势变化,各体系的最小值均出现在pH5.柠檬酸对沉积物吸附汞的影响以抑制作用为主,其抑制作用强度与吸附体系中汞浓度有关;柠檬酸对解吸量的影响也比较明显,随着柠檬酸浓度的增加,对沉积物中汞解吸作用的影响表现为促进-抑制-稳定的变化趋势.因此,以上因素对汞在沉积物表面吸附-解吸的影响较大,在进行河流汞污染控制及突发污染事件处理时,有必要充分考虑以上因素的影响.     

pH值和离子对诺氟沙星在胡敏酸上吸附特征的影响

根据OECD Guideline 106批平衡实验,研究了pH值、Ca2+浓度和离子类型对诺氟沙星在胡敏酸上吸附特征的影响.结果表明,吸附系数(Kd)随着pH值的增大有先增加后减小的趋势,在pH 4.0和pH 6.0时吸附系数较大.红外光谱表明,pH 3.0有利于诺氟沙星和胡敏酸形成氢键; pH6.0和7.0时胡敏酸的羧基可能与诺氟沙星的氨基形成了肽键.诺氟沙星在胡敏酸上的吸附量和Kd值随着溶液中Ca2+离子浓度的增加而逐渐减小,表明两者之间存在阳离子吸附和竞争吸附.不同类型的阳离子和阴离子的加入都能导致诺氟沙星在胡敏酸的吸附特性存在差异.阳离子的影响趋势主要为价态的影响,即价态越高,在胡敏酸表面吸附位点的吸附能力就越强,对诺氟沙星吸附阻碍作用越显著,表现在诺氟沙星的最大吸附量(Qm)为:M+ (Na+、K+、NH4+) >M2+ (Mg2+、Ca2+、Zn2+);其次受阳离子的离子半径和水解作用的影响.而只有能水解的阴离子才能对诺氟沙星在胡敏酸上的吸附产生明显的阻碍作用.     

Removal of heavy metal ions from aqueous solution using red loess as an adsorbent

The adsorption behaviors of heavy metals onto novel low-cost adsorbent, red loess, were investigated. Red loess was characterized by X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectra. The results indicated that red loess mainly consisted of silicate, ferric and aluminum oxides. Solution pH, adsorbent dosage, initial metal concentration, contact time and temperature significantly influenced the efficiency of heavy metals removal. The adsorption reached equilibrium at 4 hr, and the experimental equilibrium data were fitted to Langmuir monolayer adsorption model. The adsorption of Cu(II) and Zn(II) onto red loess was endothermic, while the adsorption of Pb(II) was exothermic. The maximum adsorption capacities of red loess for Pb(II), Cu(II) and Zn(II) were estimated to be 113.6, 34.2 and 17.5 mg/g, respectively at 25°C and pH 6. The maximum removal efficiencies were 100% for Pb(II) at pH 7, 100% for Cu(II) at pH 8, and 80% for Zn(II) at pH 8. The used adsorbents were readily regenerated using dilute HC1 solution, indicating that red loess has a high reusability. All the above results demonstrated that red loess could be used as a possible alternative low-cost adsorbent for the removal of heavy metals from aqueous solution.     

Mobilities and leachabilities of heavy metals in sludge with humus soil

Chemical forms of Zn, Ni, Cu, and Pb in municipal sewage sludge were investigated by adding humus soil to sludge and by performing sequential extraction procedures. In the final sludge mixtures, Zn and Ni were mainly found in Fe/Mn oxide-bound (F3) and organic matter/sulfide-bound (F4) forms. For Zn, exchangeable (F1), carbonate-bound (F2), and F3 forms were transformed to F4 and residual forms (F5). For Ni, F1 and F2 forms were transformed to F1, F2, and F3 forms. Both Cu and Pb were strongly associated with the stable forms F4 and F5. For Cu, F2 and F3 forms were major contributors, while for Pb, F3 and F4 forms were major contributors to F5. Humus soil dosage and pH conditions in the sludge were strongly correlated with the forms of heavy metals. Five forms were used to evaluate metal mobilities in the initial and final sludge mixtures. The mobilities of the four heavy metals studied decreased after 28 days. The metal mobilities in the final sludge mixtures were ranked in the following order: Ni > Zn > Cu = Pb. Leaching tests showed that the mobilities of Zn and Ni in lower pH conditions (pH 4) were higher than those in higher pH conditions (pH 8).     

Remediation of copper polluted red soils with clay materials

Attapulgite and montmorillonite were utilized to remediate heavy metal polluted red soils in Guixi City, Jiangxi Province, China. The e ects of clay minerals on availability, chemical distribution, and biotoxicity of Cu and Zn were evaluated. The results provided a reference for the rational application of clay materials to remediate heavy metal contaminated soils. From the sorption experiment, the maximum adsorbed Cu2+ by attapulgite and montmorillonite was 1501 and 3741 mg/kg, respectively. After polluted red soil was amended with attapulgite or montmorillonite and cultured at 30 and 60 days, soil pH increased significantly compared to the control. An 8% increase in the amount of montmorillonite in soil and 30 days incubation decreased acid exchangeable Cu by 24.7% compared to the control red soil. Acid exchangeable Cu decreased with increasing amounts of attapulgite and montmorillonite, with best remediation e ect reached at a dose of 8%. Results also showed that the Cu poisoning e ect on earthworms was reduced with the addition of attapulgite and montmorillonite. Montmorillonite showed the best e ect, with the addition of a 2% dose the mortality of earthworms decreased from 60% to zero compared to the control. Our results indicated that the bioavailability of Cu in soils was reduced more e ectively with the application of montmorillonite than attapulgite.     

Evaluation of reusing alum sludge for the coagulation of industrial wastewater containing mixed anionic surfactants

A coagulation-flocculation process is typically employed to treat the industrial wastewater generated by the consumer products industry manufacturing detergents, soaps, and others. The expenditure of chemicals including coagulants and chemicals for pH adjustment is costly for treating this wastewater. The objective of this study was to evaluate the feasibility of reusing the aluminum sulfate (alum) sludge as a coagulant or as a coagulation aid so that the fresh alum dosage can be minimized or the removal e ciency can be enhanced. The experiments were conducted in a jar-test apparatus simulating the coagulation-flocculation process for simultaneous removals of organic matters, anionic surfactants, suspended solids, and turbidity. At the optimum initial pH value of 10 and the fresh alum concentration of 400 mg/L, the total suspended solids (TSS), total chemical oxygen demand (TCOD), total anionic surfactants, and turbidity removal e ciencies were 71.5%, 76.4%, 95.4%, and 98.2%, respectively. The addition of alum sludge as a coagulant alone without any fresh alum addition could significantly remove the turbidity, TCOD, and anionic surfactants. The TSS was left in the supernatants after the settling period, but would subsequently be removed by adding the fresh alum. The TSS, TCOD, and turbidity removal e ciencies were also enhanced when both the alum sludge and the fresh alum were employed. The TCOD removal e ciency over 80% has been accomplished, which has never fulfilled by using the fresh alum alone. It is concluded that the alum sludge could be reused for the treatment of industrial wastewater generated by the consumer products industry.     

COD/SO42-对硫酸盐有机废水处理效率的影响

以人工配制的含硫酸盐有机废水作为原水,研究不同COD/SO42-值下厌氧折流板反应器(ABR)处理含硫酸盐有机废水去除率.试验结果表明:当COD/SO42-＜14.8时COD的去除率可达95%,SO42-的去除率在86%～96%之间;当COD/SO42-在14.8～4.0之间时,COD的去除率有所下降但仍能保持在94%...     

城市有机垃圾间歇厌氧消化pH控制动力学研究

对厌氧消化系统的物料及电离平衡进行分析,利用底物降解和微生物生长动力学建立城市有机垃圾间歇厌氧消化pH值控制模型,并研制开发了间歇厌氧消化过程pH值与产气量最优化计算机软件.运用该模型可预测不同厌氧消化过程的最佳pH值,从而通过控制厌氧系统的pH值使系统产气量达到最大,通过2组对比实验验证模型的有效性.结果表明,在相同的实验条件下厌氧系统的pH控制在最佳值时系统产气较未对pH值控制时稳定,且总产气量平均提高20%左右.