炉内喷钙脱硫的模拟

煤粉炉内喷钙脱硫是应用较为广泛的脱硫技术，运用逾渗理论建立氧化钙脱硫模型，用来模拟煤粉炉喷钙脱硫过程，并对脱硫影响因素：ＳＯ２浓度、温度、Ｃａ／Ｓ比等进行了研究，模拟计算显示了这些因素对脱硫效果的影响，其结果与试验数据相一致。通过该模型计算可以优化脱硫过程，对煤粉炉内喷钙脱硫有重要的指导意义。     

Polymerase chain reaction analysis of the cystic fibrosis ΔF508 mutation in human blastomeres following oocyte injection of a single sperm from a carrier

The efficiency of the polymerase chain reaction (PCR) in detecting the cystic fibrosis (CF) ΔF508 mutation (which is the most common mutation of CF) was assessed in single human blastomeres. Twenty-one human immature oocytes (germinal-vesicle-stage oocytes) that had been donated for research were matured in vitro and a single spermatozoon from a carrier of the CF ΔF508 mutation was injected into the ooplasm. Fourteen embryos were obtained after intracytoplasmic sperm injection (ICSI). PCR analysis was carried out on 70 single blastomeres isolated from these 14 embryos. The results showed that the efficiency of DNA amplification by PCR in single nucleate blastomeres was 94 per cent (59/63). There were no false-positive results since none of the blank samples or the blastomeres without a nucleus showed an amplified signal. We found that nine embryos were homozygous for the unaffected genotype and that four embryos were heterozygous since they contained both the unaffected and the ΔF508 genotype. In a four-cell embryo, we observed the homozygous unaffected genotype in one blastomere and a heterozygous ΔF508/unaffected genotype in the other three blastomeres.     

环境样品中痕量铅的流动注射在线分离及分光光度检测

1　IntroductionLeadiswellknownasoneofthemosttoxicmetalsandnotedinthefieldofenvironmentalchemistry[1 ] .Theleadconcentrationinnaturalwaterisextremelylow (sub μg·l-1 level)sothatsomepreconcentrationstepmustbeincludedtoassurethesensitivityofaconventionalin…     

流动注射荧光猝灭法测定环境水样中痕量磷

在硫酸溶液中，P(Ⅴ)与钼酸盐、钒酸盐生成磷钼钒杂多酸，使罗丹明6G荧光猝灭，据此建立了测定痕量磷的流动注射荧光猝灭方法。方法的测定范围为2～90μg／L,进样频率为35样/h。采用本法测定环境水样中痕量磷，结果令人满意。     

工业废水中微量镍的流动注射光度分析

采用流动注射分析技术,在柠檬酸,碘存在的氨性介质中,以丁二酮肟为显色剂,应用光度自动分析方法,测定废水中微量镍,检出限为0.3mg·l~(-1);线性范围为0.3～10mg·l~(-1);相对标准偏差<1％。     

流动注射催化光度分析法的研究进展

综述了近年来流动注射催化光度分析法的研究进展，包括环境水样中金属离子、阴离子、有机物等污染物的测定，展望了流动注射催化光度分析法未来的研究方向和发展前景。     

废塑料在炼铁工艺中的应用

介绍了废塑料的处理和利用方法 ,叙述了高炉喷吹废塑料的工艺、优点和国外的实际应用。通过比较 ,认为在高炉中应用废塑料作还原剂能带来较好的社会效益和经济效益 ,指出随着喷吹技术的不断完善 ,高炉喷吹废塑料在我国具有广阔的应用前景     

环保注水--油田污水治理的新途径

介绍了油田污水排放现状、特征及处理难点，定义了环保注水新概念。重点介绍了环保注水的特点、工艺流程、现场试验．探讨了油田污水治理、保护环境的新途径。     

流动注射在线萃取石墨炉原子吸收法测定芦荟中的铅

以APDC/MIBK为萃取系统 ,流动注射在线液 液萃取石墨炉原子吸收光谱法测定芦荟样品中痕量铅 ,对萃取条件 ,流路参数及共存组分的干扰等均进行了探讨。本法的测定精密度 (RSD)为 3 .74% ,检出限 (3σ)为 3 .2× 1 0 - 1 2 g ,加标回收率为 93 %～ 99%。测定结果令人满意。     

流动注射-荧光熄灭法测定水中的铜

采用单通道流动注射 -新试铜灵荧光熄灭法测定水环境中重金属离子Cu(Ⅱ )。在新试铜灵的浓度为 2 5×10 - 5mol L ,激发波长为 2 81nm ,发射波长为 419nm下 ,Cu(Ⅱ )浓度为 0 12 5～ 5mg L范围内 ,荧光强度与Cu(Ⅱ )浓度呈线性关系 ,检出限 0 0 76mg L ,进样速率 90次 min ,对 3mg L的Cu(Ⅱ ) 10次测定的相对标准偏差为 0 32 %～ 2 97% ,河水和矿井水中加标回收率为 95 %～ 10 5 %。该方法选择性好 ,适合于水环境大批量样品中微量铜的快速测定