无排泥运行MBR处理不同浓度氨氮废水及其生物特性

考察了水力停留时间(HRT)为10 h时无排泥运行下膜-生物反应器(MBR)处理不同浓度氨氮无机废水的运行性能及微生物特性.结果表明,在处理NH₄⁺-N≤500 mg/L的废水时,氨氮转化率可达99%且反应器内微生物增长缓慢,比硝化速率从0.2kg/(kg·d)升至0.52 kg/(kg·d);当NH₄⁺-N≥700 mg/L时,出水亚硝酸氮和氨氮相继出现明显累积,比硝化速率随之下降至0.4kg/(kg·d)以下,反应器内生物量从3 200 mg/L上升至6 700 mg/L.反应器中的氨氧化菌维持在10⁷CFU/mL,亚硝酸盐氧化菌从10⁶CFU/mL下降至10³CFU/mL.系统内的溶解性微生物产物(以TOC表示)升至65 mg/L后保持稳定,出水TOC一直维持在3～4mg/L;细胞外分泌物(EPS)在膜的截流作用下随运行时间的延长积累至600 mg/L.     

成品油管道地下水环境风险评价研究

应用环境风险评价理论,以石家庄-太原成品油管道为例,通过对工程与环境特性进行分析,识别出其主要的地下水环境风险。根据FEMWATER模型软件,结合当地的水文地质条件,模拟在设定的假想事故状态下,对地下水环境风险进行了评价研究。并提出了有针对性的工程防范措施和监测、管理对策,为工程建设环境风险管理和水资源保护提供了参考依据,也为其他成品油管道的环境风险评价提供了参考。     

Investigation of biocatalytic potential of garbage enzyme and its influence on stabilization of industrial waste activated sludge

The decomposable waste thrown into the environment can be used to produce value added bio-product which in turn reduces the production of greenhouse gas. Garbage enzyme is one such value added product produced by fermentation of organic solid waste. In the present study enzyme activity and disinfectant potential of garbage enzyme was evaluated and its influence on reduction of total solids, suspended solids and pathogens in dairy waste activated sludge were studied. The result showed the garbage enzyme possesses protease, amylase and lipase activity and reduced 37.2% of total solids, 38.6% of suspended solids and 99% of pathogens in dairy waste activated sludge. This significant result may be helpful for researchers to compare the effectiveness of earth-friendly garbage enzyme treatment of industrial sludge with various physical and chemical pre-treatment methods to improve the biogas production from the sludge digestion unit.     

成品油站场工艺管道风险辨识与评价

为保障成品油站场工艺管道的安全平稳运行,在充分辨识风险因素的前提下,提出了一种基于KENT法和RBI的风险评价方法。首先,以风险机理分析为基础,采用SHEL模型从导致风险上升的直接原因（风险内因）和间接原因（风险外因）2个角度辨识了风险因素,并细化各因素指标项;然后借鉴KENT法,对各指标项进行评分量化;依据RBI法,采用风险外因体系修正风险内因体系的方式确定失效可能性;综合环境后果、人员后果与商业后果,明确失效后果的评价体系与计算方法;最后,结合失效可能性与失效后果进行风险评价,从风险等级和风险排序2方面为检维修决策提供依据。应用表明:该评价方法便于工艺管道风险评价的基层实施,可为基于风险的检维修决策提供有效技术支撑。     

香蕉组培苗的营养和施肥

较系统地研究了香蕉组培苗的营养与施肥，试验方案包括了ＮＰＫ１３种用量水平、１０种不同ＮＰＫ配比和中微量元素混施．试验结果表明，在一定的ＮＰＫ施肥基础上．再增施ＮＰＫ均能获得不同程度的增产，其中增施Ｎ的增产幅为４．７％－１５．０％，增施Ｐ、Ｋ的分别为３．４％－１５．１％和６．６％－１２．６％．增Ｎ有利于植株增高、茎围增粗、长叶增快和提早吐蕾；增Ｐ对植株增高和提早吐蕾也有一定的作用；增Ｋ主要有利于茎围增粗，但在高Ｎ高Ｐ下增Ｋ也同样具有增Ｎ的多种效果．增Ｋ的另一效应是延缓吐蕾期而使吐蕾期较集中一致，这有利于田间管理和收获；施用中微量元素的增产效果显著，同时也改善和提高了果实品质．应提倡应用和推广．     

厌氧发酵过程pH对微生物多样性和产物分布的影响

采用PCR-DGGE技术,研究了不同pH条件下蔬菜类有机垃圾厌氧发酵过程中的微生物多样性,探讨了微生物群落结构与发酵产物分布的关系.Shannon指数分析表明,pH=7和pH=8时的微生物多样性较高,随时间变化规律相似,而pH=5时的微生物多样性较低.UPGMA聚类分析和PCA分析结果也表明,pH=7和pH=8时的微生物群落结构相似,pH=5与之显著不同.在不同pH条件下的优势菌属都是乳酸细菌和梭菌。微生物多样性的变化与发酵产物分布具有一定相关性,pH通过影响微生物群落结构的变化最终影响发酵产物的分布.图4表2参27     

生态经济学的价值观

农业产品因投入劳动和消耗自然界的资源形成价值。农业产品在生产和流通过程中，伴随其本身的价值，还会产生其经济效益。利用生态循环中可以再生的资源，可产生生态经济效益，运用先进的农业技术可产生技术经济效益，流通领域中的供求优势可产生社会经济效益。     

油品储运对环境的影响及其防治措施

油品在储运过程中产生一定的损耗,造成对大气环境污染,从而影响人类健康,着重分析装油、卸油等过程中的损耗,并且给出了常压油罐油品储存、液体石化产品装车挥发损耗量,还提出了科学的油品储存管理,改进储运操作;将拱顶罐改造成内浮顶式油储罐和采用密闭化装车等防治污染措施,以保护环境,提高经济效益。     

Principles and perspectives

BACKGROUND, AIM AND SCOPE: With respect to the enormous increase of chemical production in the last decades and the tens of thousands of individual chemicals on the market, the permanent improvement of chemical management is a permanent target to achieve the goals of sustainable consumption and production set by the WSSD in Johannesburg 2002. MAIN FEATURES: Several approaches exist to describe sustainability of chemistry. However, commonly agreed criteria are still missing. There is no doubt that products of modern chemistry help to achieve important goals of sustainability and that significant improvements have occurred regarding direct releases from production sites, but several facts demonstrate that chemistry is far from being sustainable. Still too many chemicals exhibit hazardous characteristics and pose a risk to health and environment. Too many resources are needed to produce chemicals and finished products. RESULTS AND CONCLUSION: Therefore, a strategy for sustainability of chemistry should be developed which comprises the following main elements: 1. Sustainable chemicals: sustainable chemical management includes a regulatory framework which makes no difference between new and existing chemicals, contains efficient information flow through the supply chain which allows users to handle chemicals safely and offers an authorisation procedure and/or an efficient restriction procedure for substances of high concern. This regulatory scheme should promote the development of inherently safe chemicals. 2. Sustainable chemical production: Sustainable chemical production needs the development and implementation of emerging alternative techniques like selective catalysis, biotechnology in order to release less CO2 and less toxic by-products, to save energy and to achieve higher yields. Information exchange on best available techniques (BAT) and best environmental practices (BEP) may help to promote changes towards more sustainability. 3. Sustainable products: An integrated product policy which provides a framework for sustainable products promotes the development of products with a long-term use phase, low resource demand in production and use, low emission of hazardous substances and properties suitable for reuse and recycling. This may be promoted by eco-labelling, chemical leasing concepts and extended information measures to enhance the demand of consumers and various actors in the supply chain for sustainable products. RECOMMENDATION AND PERSPECTIVE: Important tools for the promotion of sustainable chemistry are the abolition of barriers for innovation in legislation and within the chemical industry, more transparency for all users of chemical products, a new focus on sustainability in education and research, and a new way of thinking in terms of sustainability.     

产品生命周期可得性水足迹计算方法

水足迹方法试图量化评价人类活动对水资源可得性的影响,从而为水资源可持续利用提供科学的依据.水足迹的评价方法尚未统一,目前全球应用最为广泛的是WFN（water footprint network,水足迹协作网络）水足迹计算方法.基于LCA（life cycle assessment,生命周期评价）方法的基本框架,围绕水资源可得性的水量、水质和空间分布3个因素,在分析现有水足迹计算公式的基础上,指出了WFN水足迹计算方法的不足.根据国际水足迹标准（ISO 14046）的原则和要求,改进了WFN的水足迹计算公式,提出了产品生命周期WAF（water availability footprint,可得性水足迹）定义和评价方法,其中包括单元过程数据计算、背景过程数据处理和生命周期汇总.通过方法对比和案例研究得到:WAF方法统一了水消耗量与水污染量定义中的水质基准,可以明确区分水污染和水净化两类过程,还可以反映区域水资源稀缺程度的影响;采用WAF方法,在现有LCA数据库和软件的支持下可以更为规范地完成生命周期水足迹建模与计算但目前单元过程数据计算中各种污染物的基准浓度选取有不可避免的主观性,将直接影响到水足迹计算结果及其客观性,有待进一步研究.