Response of the sediment geochemistry of the Changjiang River (Yangtze River) to the impoundment of the Three Gorges Dam

Based on the measurement of major and trace elements in suspended sediments in the low reaches of the Changjiang River during throughout a whole hydrologic year, the origins, seasonal variations, and fluxes of multielements and the human impacts on multielements transport processes have been analyzed along with the influence of weathering in the Changjiang River basin. The results show that most element contents were high in both autumn and winter and low in summer, which was largely caused by the dilution of discharge. Weathering detritus in the Changjiang River basin is the main source of most elements in suspended sediments. However, riverine pollution could bring more loadings of Cd, Pb, As and Zn into river water than it did a few decades ago. The annual average fluxes of Cd, Pb and Zn, which are major contamination elements, to the sea were 179 ± 21 tons/year, 7810 ± 675 tons/year, and 12,000 ± 1320 tons/year,respectively, in which approximately 8.7%, 11.9% and 2.7% of their loadings, respectively,were contributed by pollution inputs. Element exports mainly occurred in the summer(44.4%–57.4%) in the lower part of the Changjiang River. A general relationship between sediment retention and element content suggests a positive feedback mechanism for the decreased number of particles, in which element riverine loadings are reduced due to the enhanced trapping effect by the Three Gorges Dam(TGD). Compared to those in 1980,current element shares of the Changjiang River compared to the global budget have declined due to the construction of the TGD.     

ACP1000除气塔液体冷却器抗震分析设计

目的对除气塔液体冷却器进行抗震分析,以确保其在地震下必要的安全功能。方法以福清5/6号核电工程为背景,通过有限元软件ANSYS建立除气塔液体冷却器有限元模型,采用反应谱法进行设备的抗震分析与评定。结果通过抗震分析评定,发现设备鞍座为设计薄弱区域,故修改鞍座的结构形式,包括新增筋板、增加壁厚,使该设备的设计满足了相关规范的要求。结论通过修改鞍座的结构形式,确保其必要的安全功能得以实现,满足实际工程的需要。     

基于ANSYS Workbench的车载天线流固耦合分析

目的检验车载天线在九级风作用下结构是否会发生破坏。方法以车载天线作为研究对象,应用Catia软件建立天线结构的三维模型,利用ANSYS Workbench对天线结构进行流固耦合分析,得到天线在空气流场作用下的气动载荷分布情况。通过耦合面节点差值算法将气动力加载到天线耦合面,对承受气动力的天线进行结构静力学分析,计算天线结构在空气流场作用下的应力分布情况和变形结果。结果车载天线受到侧向风吹压力约为533.8 N,摆幅为186.02 mm;正向风吹压力约为514 N,摆幅为171.6 mm。结论车载天线在20 m/s(九级风)的风载荷作用下,结构不发生破坏,且摆幅不超过200 mm。     

某型号伺服排油管动力学特性研究

目的 通过对某型号伺服排油管动力学特性研究,为管路设计方案的确定提供依据。方法 对三种设计方案的伺服排油管进行振动试验,测量其关键位置的应变响应,并结合有限元计算进行结果分析。结果 该伺服排油管的谐振频率在180 Hz附近,当振动环境在180 Hz附近有峰值时,会发生耦合共振,管路应变很大。结论 管路设计时谐振频率应避开环境的危险频率,无法避开时需要对管路进行加强。     

基于气囊缓冲的某火箭炮着陆冲击分析

目的减小火箭弹着陆冲击加速度。方法基于LS-DYNA瞬态动力学分析软件和冲击动力学理论,采用有限元软件HYPERMESH建立火箭炮-气囊系统有限元模型,采用显式动力学方法对火箭炮-气囊系统的着陆冲击缓冲过程进行仿真。分析火箭炮在正常着陆工况下,火箭弹的着陆冲击响应,得出空投装备速度、加速度变化曲线,以及气囊的体积、压力曲线。结果在正常着陆工况下,火箭弹横向加速度的最大值为122 m/s2,小于安全的横向加速度;火箭弹纵向加速度的最大值为48.3 m/s2,小于安全的纵向加速度;火箭弹的最大轴向力为2640 N,小于安全闭锁力。结论在火箭炮着陆冲击过程中,气囊缓冲装置吸收了大部分冲击能量,起到了良好的缓冲作用,火箭弹的冲击加速度、闭锁力均在安全范围内。采用显式动力学方法对火箭炮的着陆冲击过程进行分析是可行的。     

Local calibration of coliforms parameters of water quality problem at Igapó I Lake, Londrina, Paraná, Brazil

This article presents results concerning the local calibration of the transport parameters (longitudinal and transversal diffusions and decay coefficient) for a two-dimensional problem of water quality at Igapó I Lake, located in Londrina, Paraná, Brazil, using fecal coliforms as an indicator of water quality. The simulation of fecal coliforms concentrations all over the water body is conducted by means of a structured discretization of the geometry of Igapó I Lake, together with the finite difference and finite element methods. By using the velocity field, modeled by the Navier-Stokes and Poisson equations, the flow of fecal coliforms is described by means of a transport model, which considers advective and diffusive processes, as well as a process of fecal coliforms decay. In the checkpoint, the longitudinal and transversal diffusion coefficients and the coliforms decay coefficient that best fitted the value of the fecal coliforms concentration were D_x = D_y = 0.001 m²/h and k = 0.5 d⁻¹ = 0.02083 h⁻¹. A qualitative and quantitative analysis of the numerical simulations conducted in function of the diffusion coefficients and of the coliforms decay parameter provided a better understanding of the local water quality at Igapó I Lake.     

重庆市主城区春夏季不同粒径颗粒物污染特征分析

采用多通道采样器,采集重庆市主城区PM1.0、PM2.5和PM103种粒径的颗粒物样品,结果显示采样期间PM1.0、PM2.5和PM10日浓度均值分别为0.057 mg/m3、0.075 mg/m3和0.120 mg/m3,主城区颗粒物污染较为严重。对3种粒径颗粒物样品中的碳组分、水溶性组分以及无机污染元素组分进行分析...     

堆积体边坡渐进性破坏的随机模型

为精确模拟堆积体边坡变形破坏过程,根据堆积体所固有的非连续性、非均质性、各向异性等特点,以及边坡变形破坏的渐进性特征,采用改进的有限单元法(FEM)对堆积体边坡进行模拟。考虑堆积体边坡从连续位移函数到不连续位移函数的突变。破裂发生前,用连续位移函数进行计算;破裂发生后,引入不连续位移函数。研究结果表明,破裂面上不同点的安全系数(FOS)是不同的,但都随着破坏过程而降低。同时,可以得出不同非均匀程度下安全系数的概率分布。     

火灾下梁柱端板连接节点的力学性能研究

通过火灾作用下门式刚架半刚性端板连接节点ANSYS计算模型的分析,得出了节点的转角温度关系及转角达到极限状态时的临界温度,为分析节点在火灾下的转动性能和节点的抗火能力提供一种经济、可行的方法,并发现在进行ANSYS模型抗火计算时,采用EC3高温下钢材特性较为合理。对基于计算的钢结构节点抗火设计方法研究具有理论意义和工程...     

建筑钢结构中钢构件的防火性能与抗火设计研究

首先有针对性地对当前国内外建筑钢结构中钢构件的防火性能与抗火设计研究背景做了较系统分析,接着,通过有限元程序,对当前应用非常广泛的半刚接门式刚架建筑在火灾高温下的受力性能进行了整体结构非线性分析。计算结果表明：随着温度的升高,钢构件节点的刚度不断下降,当节点的刚度下降到不能约束与其连接的梁柱构件时,结构将发生突然坍塌性...