生物膜填料塔净化有机废气研究

为在国内开展生物化学法净化低浓度有机废气的研究工作,采用国内现有微生物菌种挂膜接种的生物膜填料塔净化低浓度甲苯废气,结果表明,在入口气体甲苯浓度0.183～1.803mg/L及气体流量86.4～190.8L/h（停留时间6.2～13.6s）的实验范围内,增加入口气体甲苯浓度和气体流量,可使甲苯的生化去除量增大,每升体积的生物膜填料对甲苯的生化去除量最大可达157.13mg/h。由实验结果推断,生物膜填料塔对废气中甲苯的净化去除过程属于传质控制过程。对比结果表明,本研究建立的动力学模式对实际过程有很好的适用性,计算值与实验值之间的相关系数R＝0.98。     

Redox potential and uranium sorption onto sediments: kinetic and thermodynamic characteristics

ABSTRACT

The effects of the flooding and initial Eh of sediments on the sorption of uranium onto the sediments were analysed by flooding and static experiments. The changes in uranium species with Eh and kinetic and thermodynamic characteristics of the uranium sorption onto the sediments were investigated. The flooding experiment indicates that the initial Eh of the sediment gradually decreased with the increase in flooding time. Based on the redox potential in the flooding experiment, simulation results obtained using the geochemical simulation software PHREEQC show that the concentration of U (VI) decreased. In contrast, the concentrations of U (III), U (IV), and U (V) gradually increased. The pseudo-second-order kinetic model well fitted the experimental data, which shows that the sorption was mainly chemical sorption. The thermodynamic parameters suggest that the entropy and enthalpy under the used conditions were positive and that ΔG^θ was negative. A thermodynamic analysis shows that the sorption was endothermic and spontaneous. These results are useful for the understanding of the sorption mechanism and migration of uranium onto the sediment under different initial sediment redox potentials and provide a good theoretical foundation for radioactive pollution remediation.     

高分子除氯剂对水中氯离子的吸附机理

采用高分子除氯剂吸附水中的氯离子,考察了除氯剂投加量、反应时间、反应温度、竞争离子等对氯离子去除率的影响。实验结果表明:随着除氯剂投加量增加,氯离子去除率不断提高;吸附动力学符合拟二级动力学模型,表明化学吸附可能是氯离子吸附过程的速率控制步骤;Elovich模型表明除氯剂表面吸附的氯离子存在非均相扩散的吸附-脱附过程;Freundlich等温吸附模型能更好地描述吸附过程,结合热力学计算表明该过程是一个自发进行的吸热熵增的化学吸附过程,温度越高自发程度越大。     

Trends in Raindrop Kinetic Energy with Modeled Climate Warming in the Lake Tahoe Basin

Two means by which climate change may increase surface soil erosion in mountainous terrain are: (1) increasing the frequency of extreme rainfall events and (2) decreasing the duration of snow cover on bare soil. We used output from four general circulation models (GCMs) and two greenhouse gas trajectories to produce a suite of hydrologic variables at a daily time‐step for historic and projected 21st Century conditions. We statistically disaggregated the daily rainfall to hourly, using hourly rainfall from a network of nine weather stations in the Tahoe Basin, and filtered out rain falling on a snowpack. We applied published equations to convert hourly intensity to raindrop kinetic energy (KE) for each day and grid cell in the Basin, averaged across grid cells, and created time series of total annual and maximum annual hourly kinetic energy (TKE and MKE) on snow‐free ground. Using the Generalized Extreme Value distribution, we calculated the significance of long‐term trends in KE on snow‐free ground, and estimated energy levels for return periods of 2, 20, and 100 years. We then detrended the snowpack data and compared the resulting trends in KE with the trends resulting from changes in both rainfall energy and snowpack under two GCMs. Principal findings include (1) upward trends in MKE, (2) stronger upward trends in TKE; and (3) an effect of increasing rainfall intensities on KE in some cases, and a strong effect of reduced snowpack in all cases examined.     

Identical full-scale biogas-lift reactors (BLRs) with anaerobic granular sludge and residual activated sludge for brewery wastewater treatment and kinetic modeling

Two identical full-scale biogas-lift reactors treating brewery wastewater were inoculated with different types of sludge to compare their operational conditions, sludge characteristics, and kinetic models at a mesophilic temperature. One reactor （R1） started up with anaerobic granular sludge in 12 weeks and obtained a continuously average organic loading rate （OLR） of 7.4 kg chemical oxygen demand （COD）/（m3.day）, COD removal efficiency of 80%, and effluent COD of 450 mg/L. The other reactor （R2） started up with residual activated sludge in 30 weeks and granulation accomplished when the reactor reached an average OLR of 8.3 kg COD/（m^3·day）, COD removal efficiency of 90%, and effluent COD of 240 mg/L. Differences in sludge characteristics,biogas compositions, and biogas- lift processes may be accounted for the superior efficiency of the treatment performance of R2 over R1. Grau second-order and modified StoverKincannon models based on influent and effluent concentrations as well as hydraulic retention time were successfully used to develop kinetic parameters of the experimental data with high correlation coefficients （R2 〉 0.95）, which further showed that R2 had higher treatment performance than R1. These results demonstrated that residual activated sludge could be used effectively instead of anaerobic granular sludge despite the need for a longer time.     

DME简化反应模型及其在HCCI燃烧分析中的应用研究

提出了一个可应用于HCCI发动机工作过程研究的DME化学反应动力学简化模型,该模型由28种组分、38个基元反应组成,包括3个子模型,即低温反应和负温度系数区子模型、高温裂解和高温氧化子模型以及甲酸生成过程子模型.通过算例对比分析,该DME简化模型能正确揭示DME燃烧过程主要生成物组分的变化规律,能准确计算DME燃烧过程低温和高温阶段的放热特征时刻,其计算结果与详细机理计算结果吻合.相对于详细机理,简化模型节省了计算时间,为实现化学反应动力学与CFD多维模型耦合的燃烧计算提供了一个可行而有效的途径.     

Factors influencing the photodegradation of N -nitrosodimethylamine in drinking water

In order to provide basic data for practical application, photodegradation experiment of N-nitrosodimethylamine (NDMA) in aqueous solution was carried out with a low-pressure Hg lamp. Effects of the initial concentration of NDMA, solution pH, dissolved oxygen, and the presence of humic acid on NDMA photodegradation were investigated. NDMA at various initial concentrations selected in this study was almost completely photodegraded by UV irradiation within 20 min, except that at 1.07 mmol/L, NDMA could be photodegraded almost completely in the acidic and neutral solutions, while the removal efficiency decreased remarkably in the alkaline solution. Dissolved oxygen enhanced the NDMA photodegradation, and the presence of humic acid inhibited the degradation of NDMA. Depending on the initial concentration of NDMA, NDMA photodegradation by UV obeyed the pseudo-first-order kinetics. Dimethylamine, nitrite, and nitrate were detected as the photodegradation products of NDMA. ¹O₂ was found to be the reactive oxygen species present in the NDMA photodegradation process by UV, based on the inhibiting experiments using tert-butanol and sodium azide.     

锯末对Cu~(2+)的吸附特性研究

以工业废弃物锯末为吸附剂,研究其对水中Cu2+的吸附特性.结果表明,锯末对Cu2+的吸附速度较快,1 h后基本达到平衡.准二级速率方程很好地模拟了吸附反应的动力学方程(R20.99).锯末对Cu2+吸附主要机制是离子交换,吸附量随pH升高而升高.离子强度对吸附反应有一定影响:Cu2+和锯末一部分是内层结合,一部分是外层结合.经过酸碱处理的锯末在吸附能力上有了一定程度的提高.Langmuir模型对原始锯末的吸附等温线拟合最好,Langmuir-Freundlich模型对经过酸碱处理的锯末拟合最好.热力学分析显示吸附反应具有自发性、放热、熵增特性.     

SO_2体积分数对ZL50活性炭吸附脱硫行为的影响和动力学分析

通过动态吸附烟气脱硫实验,考察了烟气中不同SO2体积分数对ZL50脱硫脱硝活性炭脱硫行为的影响,并进行了动力学分析.随着烟气中SO2体积分数增大,脱硫率和ZL50脱硫脱硝活性炭的活性度下降;SO2吸附量和吸附速率增大.模拟结果表明,Bangham模型模拟效果最优,SO2的催化氧化反应对化学吸附有重要影响;Lagergren准一级吸附速率常数随SO2进口体积分数的增加而增大,表明SO2的催化氧化反应在吸附前期可能为速控步骤.推导和定义了Lagergren模型和Bangham模型的初始吸附速率;推导了文献上的Ho模型和Elovich模型的初始速率式。定义的Bangham初始吸附速率与初始吸附速率实验值吻合最好;建立的Bangham吸附反应动力学模型能较好地描述SO2动态吸附速率.结果表明,SO2的初始反应速率分级数为1或接近1,而O2和水蒸气的初始速率分级数分别为0.15～0.20和0.45～0.50之间的常数.     

Kinetic adsorption of application of carbon nanotubes for Pb（II） removal from aqueous solution

The capability of carbon nanotubes (CNTs) to adsorb lead (Pb) in aqueous solution was investigated. Batch mode adsorption experiment was conducted to determine the effects of pH, agitation speed, CNTs dosage and contact time. The removal of Pb(II) was reach to maximum value 85% or 83% at pH 5 or 40 mg/L of CNTs, respectively. Higher correlation coefficients from Langmuir isotherm model indicates the strong adsorptions of Pb(II) on the surface of CNTs (adsorption capacity Xm = 102.04 mg/g). From this study, the results indicates that the highest percentage removal of Pb (96.03%) can be achieved at pH 5, 40 mg/L of CNTs, contact time 80 min, and agitation speed 50 r/min.