Prevention of an atmospheric storage tank bund failure

Secondary containment (bunds, drip trays, interceptors/sumps) is an integral part of many chemical, petrochemical, as well as agricultural, food and pharmaceutical facilities. Bunds are the built-in cases for accidental liquid substance spillage where there is a hazard that a substance could leak into the surroundings and the potential of health or environmental damage. The authors focus on the cases installed in large-volume atmospheric tanks storing hazardous chemicals in liquid form, where the bund failure occurred. In the first part of the study, a database of these accidents was created, numbering a total of 15 items. Attention was paid to the course of the accident, its causes and consequences. Several basic representative scenarios of bund failure have also been developed. The second part of the study is devoted mainly to the measures against the bund failure, such as risk assessment, technical and organizational measures. The aim of this study is to provide readers (including experts in the field of safety engineering, maintenance experts and building designers) with the information that can subsequently be used in the risk assessment of bund failure, possibly also for planning the construction of new bunds, or revitalization and maintenance of the existing ones.     

g-C_3N_4/C@Bi_2MoO_6复合光催化剂的制备及其光催化活性

通过水热合成法和液相沉积法制备g-C_3N_4/C@Bi_2MoO_6复合光催化剂,并采用X射线衍射、扫描电子显微镜、氮气吸脱附、紫外-可见漫反射等技术对其进行表征。研究了可见光下g-C_3N_4/C@Bi_2MoO_6催化降解罗丹明B(Rh B)的影响因素,并对其光催化反应机理进行初步探讨。实验结果表明:g-C_3N_4掺杂量为60%(w)时g-C_3N_4/C@Bi_2MoO_6的光催化活性最高;在60%g-C_3N_4/C@Bi_2MoO_6的投加量为1.00 g/L、初始Rh B质量浓度为2.50 mg/L、可见光照射150 min的条件下,Rh B的降解率达到97.90%;在g-C_3N_4/C@Bi_2MoO_6光催化降解体系中,h~+和·O_2~-是主要活性物种。     

模糊综合评价法在钢铁企业安全投资合理性评价中的应用

为了对钢铁企业安全投资进行模糊综合评价,建立了钢铁企业安全投资的评价体系,确定各因素的权重。得出模糊综合评价矩阵,可对各因素进行评价分析;得出某钢铁企业安全投资现状分数为83.9分,等级为较好,需着重加强安全培训、劳保品、工业卫生等人因素方面的投资;在环境方面的投资较合理。     

大肠杆菌吸附-化学还原法用废含金催化剂制备金纳米线

采用大肠杆菌吸附-化学还原法,以大肠杆菌(ECCs)为模板、十六烷基三甲基溴化铵为保护剂、抗坏血酸为还原剂,由废含金催化剂制备金纳米线(AuNWs)。采用XRD,SEM,TEM等技术对AuNWs进行表征。研究了AuNWs对罗丹明6G(R6G)和4-巯基苯甲酸(4-MBA)的拉曼散射信号的增强效果。实验结果表明:在制备过程中加入微生物ECCs,可使金回收率提高约20百分点;当溶液pH小于4时,反应2 h后,有大量呈线状的AuNWs聚集沉降,金回收率可达99%1以上。表征结果显示,AuNWs呈多晶结构,晶格间距为0.23 nm。表面增强拉曼散射分析表明,AuNWs对R6G和4-MBA具有良好的拉曼光谱增强性能。     

预氧化聚丙烯腈/g-C3N4光催化降解罗丹明B

以聚丙烯腈(PAN)和g-C_3N_4为原料,采用超声波辅助分散的溶液浸渍法及煅烧法制备了具有共轭结构的预氧化聚丙烯腈/g-C_3N_4复合光催化剂(CPAN/g-C_3N_4),采用XRD、SEM、FTIR、UV-Vis DRS、EIS等技术对光催化剂进行了表征,考察了CPAN/g-C_3N_4对罗丹明B(Rh B)的可见光催化降解性能。结果表明:CPAN与g-C_3N_4具有良好的协同作用,使g-C_3N_4片状结构堆叠体颗粒显著减小,明显增强了光催化剂在全部光谱范围内的光吸收,有效提高了光生电子-空穴分离效率;在PAN与g-C_3N_4质量比为1∶200、煅烧温度250 ℃、煅烧时间1 h条件下所制备的CPAN/g-C_3N_4光催化活性最高,且具有良好的光催化活性稳定性。超氧自由基和光生空穴为CPAN/g-C_3N_4复合光催化剂光降解罗丹明B的主要活性物种。     

Study on the dynamic response of polyurea coated steel tank subjected to blast loadings

Steel tanks are widely used in the storage of various chemical liquids, and the blast resistance of the tanks is very important because of the explosiveness of these liquids. To explore a feasible method to improve the blast resistance of steel tanks, the effect of polyurea coating on the blast resistance of steel storage tank is investigated in this paper. The responses of monolithic steel tanks and polyurea coated tanks under blast loads are studied by field blast experiments using TNT explosive, and the results shows that the polyurea layers are effective in reducing the maximum and residual displacements of the tank. Numerical simulations are performed and validated, and the deformation process and stress and strain distribution of the tanks are analyzed accordingly. The increase on the bending moment of the plastic hinge lines of the tanks and the increase of the area density of the cylindrical shell induced by the polyurea layers are believed to be the two main factors contributing to the displacement reduction effect of polyurea in this paper. The validated numerical model is used to study the influence of polyurea layer's thickness on the deflection of the tank, and a nearly inversely proportional relationship between the thickness and the maximum displacement is found. Three deformation modes of the tanks are identified when subjected to blast load with varying intensity and it is found that the displacement reduction effect of polyurea varies in different deformation modes.     

基于疲劳累积破坏机制的储罐结构动力可靠度分析

针对随机风载荷作用下储罐结构动力可靠性问题，以300 m3的中小型立式低温储罐为研究对象，利用AR模型进行数值模拟得到风载荷的脉动风速时程与脉动功率谱密度函数。采用ANSYS建立储罐三维有限元模型，并对储罐进行动力学分析，计算出储罐结构的随机响应，进而求出随机风载荷作用下储罐结构动力可靠性所需全部数字特征，最后利用疲劳累积损伤机制计算得到储罐的动力可靠度。结果表明:假设结构强度不随时间退化，前5 a动力可靠度基本保持不变，随着使用年限的延长，动力可靠度下降速度明显增大。研究方法可为储罐的动力可靠性及寿命预测提供一定的理论依据。     

BIM技术在钢结构建筑抗震减灾管理中的应用

为提高钢结构建筑抗震减灾性能,降低建筑坍塌风险,研究BIM技术在钢结构建筑抗震减灾管理中的应用方法是非常必要的。利用BIM技术在钢结构建筑整体建造中的动态建模、可视化、信息共享管理以及抗震减灾性能检测等优势,在建筑抗震减灾管理决策阶段,选出最优方案,针对方案中影响建筑抗震减灾性能风险制定管理策略;在设计阶段,创建三维建筑模型,调整存在风险建筑模型数据信息,并通过振荡模拟分析降低风险;在施工阶段,管理钢结构建筑材料,提升建筑构件的刚度,并依据建筑施工阶段的抗震减灾管理原则制定相应的管理方法,实现对钢结构建筑的抗震减灾管理。结果表明,BIM技术可实现抗震减灾管理中的地震波检测,检测结果精准可靠;可提升建筑构件的刚度与承载力及建筑的抗震减灾性能,降低建筑坍塌等风险,实现钢结构建筑抗震减灾管理。     

鞍钢钢绳厂生产污水处理的工艺设计及运行效果

本文介绍了鞍钢钢绳厂生产废水处理工艺,包括沉淀系统、气浮系统、砂滤罐过滤系统。通过试验确定p H为11时,沉淀系统对Zn2+的去除率达到98.4%。通过正交试验确定当PAC用量为20 mg/L、PAM用量为2 mg/L、p H 7.5、气浮压力为1.2 Mpa时气浮系统对钢绳厂废水中SS、石油类、COD的去除率分别达到90%、70%、70%。经过砂滤罐过滤系统后废水中的SS为20 mg/L、石油类为2 mg/L、COD为48 mg/L,其去除率分别达到94%、78%、80%。     

Improved models of failure time for atmospheric tanks under the coupling effect of multiple pool fires

Fire accidents of chemical installations may cause domino effects in atmospheric tank farms, where a large amount of hazardous substances are stored or processed. Pool fire is a major form of fire accidents, and the thermal radiation from pool fire is the primary hazard of domino accidents. The coupling of multiple pool fires is a realistic and important accident phenomenon that enhances the propagation of domino accidents. However, previous research has mostly focused on the escalation of domino accidents induced by a single pool fire. To overcome the drawback, in this study, the failure of a storage tank under the coupling effect of multiple pool fires was studied in view of spatial and temporal synergistic process. The historical accident statistics indicated that the accident scenario of two-pool fires accounted for 30.6% in pool fires. The domino accident scenario involving three tanks is analyzed, and the typical layout of tanks is isosceles right triangle based on Chinese standard “GB50341-2014”. The thermal response and damage of a target tank heated by pool fires were numerically investigated. The volume of 500 m³, 3000 m³, 5000 m³ and 10000 m³ were selected. Flame temperature was obtained by FDS, and then was input onto the finite element model. The temperature field and stress field of target tanks were simulated by ABAQUS. The results showed that the temperature rise rate of the target tanks under multiple pool fires was higher than that under a single pool fire. The failure time of the tank under the coupling effect of multiple fires was lower than that under the superposition of multiple fires without the first stage. The stress and yield strength were compared to judge the failure of the target tank. The model of failure time for the tank under the coupling effect of pool fires was established. Through the verification, the deviation of this model is 4.02%, which is better than the deviation of 15.76% with Cozzani's model.