Modeling of a sequencing batch reactor treating municipal wastewater using multi-layer perceptron and radial basis function artificial neural networks

A sequencing batch reactor was modeled using multi-layer perceptron and radial basis function artificial neural networks (MLPANN and RBFANN). Then, the effects of influent concentration (IC), filling time (FT), reaction time (RT), aeration intensity (AI), SRT and MLVSS concentration were examined on the effluent concentrations of TSS, TP, COD and NH₄⁺-N. The results showed that the optimal removal efficiencies would be obtained at FT of 1 h, RT of 6 h, aeration intensity of 0.88 m³/min and SRT of 30 days. In addition, COD and TSS removal efficiencies decreased and TP and NH₄⁺-N removal efficiencies did not change significantly with increases of influent concentration. The TSS, TP, COD and NH₄⁺-N removal efficiencies were 86%, 79%, 94% and 93%, respectively. The training procedures of all contaminants were highly collaborated for both RBFANN and MLPANN models. The results of training and testing data sets showed an almost perfect match between the experimental and the simulated effluent of TSS, TP, COD and NH₄⁺-N. The results indicated that with low experimental values of input data to train ANNs the MLPANN models compared to RBFANN models are more precise due to their higher coefficient of determination (R²) and lower root mean squared errors (RMSE) values.     

单级与两级序批式反应器用于牛场污水处理的比较研究

对序批式反应器 (SBR)的特点进行了简要的介绍。研究了水力停留时间和有机负荷率对单级和两级SBR用于牛场污水处理时污染物去除率和出水水质的影响 ,并对单级和两级SBR的污水处理性能进行了比较。研究结果表明 ,当用单级SBR处理 10 0 0 0mg LCODCr的污水时 ,1d水力停留时间即可获得较好的处理效果 ,但出水中仍含有一定量的氨。两级SBR可使用较短的水力停留时间而获得较高的污染物去除率和较好的出水水质 ,并可通过硝化过程实现氨的完全的去除     

碳酸锶生产中"三废"综合利用研究

介绍了碳还原法生产碳酸锶过程中"三废"的主要成分;提出了用克劳斯燃烧法和吸收氧化法生产硫磺,用直接合成法和4级联合吸收法生产硫脲综合利用废气的途径;提出了2种治理废水方案,不仅达到脱硫、脱氮、降解有机物目的,而且还可得到硫磺、碳酸氢氨副产品;探讨了锶渣在砖、水泥的生产及公路工程建设中应用的可行性.     

序批式反应器的水力停留时间的理论探讨

根据液龄分布函数是二元函数的观点．推导出了当进、出水流量是时间的函数时，反应器的水力停留时间的通用积分式和离散式；然后得出了序批式反应器(SBR）的水力停留时间(HRT)具体表达式，并分析了用现有方法计算其水力停留时间所产生的误差．结果表明，最大相对误差rmax仅与充水比λ有关．且呈正相关关系．取典型值λ=0．4时，rmax高达25％。     

水解酸化-序批式活性污泥法处理啤酒生产废水

根据啤酒废水的生产特点及水质特征 ,选择了水解酸化—序批式活性污染法处理工艺。该工艺运行结果表明 ,系统处理出水可以达到国家污水综合排放标准的一级标准。主要介绍了啤酒废水水质特点 ,处理工艺流程 ,主要构筑物技术参数及调试运行情况。     

一种序批式生物膜反应器及其氧传递系数测定

介绍了一种序批式生物膜反应器 ,并求出了在给定的工艺条件下的氧传递系数。结果表明 :本反应器有较强的氧传递能力 ,能满足微生物的新陈代谢和降解有机污染物的需要     

Acid resistance of methanogenic bacteria in a two-stage anaerobic process treating high concentration methanol Wastewater

In this study, the two-stage upflow anaerobic sludge blanket (UASB) system and batch experiments were employed to evaluate the performance of anaerobic digestion for the treatment of high concentration methanol wastewater. The acid resistance of granular sludge and methanogenic bacteria and their metabolizing activity were investigated. The results show that the pH of the first UASB changed from 4.9 to 5.8 and 5.5 to 6.2 for the second reactor. Apparently, these were not the advisable pH levels that common methanogenic bacteria could accept. The methanogenic bacteria of the system, viz. Methanosarcina barkeri, had some acid resistance and could still degrade methanol at pH 5.0. If the methanogenic bacteria were trained further, their acid resistance would be improved somewhat. Granular sludge of the system could protect the methanogenic bacteria within its body against the impact of the acidic environment and make them degrade methanol at pH 4.5. The performance of granular sludge was attributed to its structure, bacteria species, and the distribution of bacterium inside the granule. Translated from Acta Scientiae Circumstantiae, 2004, 24(4): 633–636 [译自: 环境科学学报]     

SBBR同步硝化反硝化处理生活污水的影响因素

序批式生物膜反应器SBBR采用塑料鲍尔环填料,在有氧情况下用于处理实际生活污水.该反应器能很好地创造缺氧微环境,载体生物膜具有吸附储碳能力,出现了良好的同步硝化和反硝化现象.反应器中溶解氧浓度在较大的范围内(0.8～4.0 mg·L-1)能有效地实现同步硝化和反硝化.当溶解氧浓度大于4.0 mg·L-1后,TN容积去除率大幅下降,出水TN大幅上升.增加载体生物膜厚度有利于同步硝化和反硝化.进水浓度基本不影响脱氮的效率,但出水TN随进水浓度增加而升高,建议原水浓度高时可增加后续脱氮处理或减少进水量来满足出水要求.优化运行方法和参数后,SBBR连续运行的TN去除率可稳定在74%～82%.     

独立学院教学中的四忌

独立学院的学生与母体高校学生相比有一定的特殊性。独立学院的教学如若完全沿用母体高校的方法和要求,势必会出现一些问题和矛盾。为此,在独立学院教学中,教师应注意四忌。     

Treatment of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran production effluent by combination of biological treatments and Fenton＇s oxidation

High strength refractory organic stream is produced during the production of 2-phenylamino-3-methyl-6-di-n-butylaminofluoran （One Dye Black 2, abbr. ODB 2）, a novel heat-sensitive material with a promising market. In this study, a combination of acidificationprecipitation, primary biological treatment, Fenton＇s oxidation and another biological treatment was successfully used for the removal of COD from 18000-25000 mg/L to below 200 mg/L from the ODB 2 production wastewater in a pilot experiment. A COD removal of 70%-80% was achieved by acidification-precipitation under a pH of 2.5-3.0. The first step biodegradafion permitted an average COD removal of 70% under an hydraulic residence time （HRT） of 30 h. By batch tests, the optimum conditions of Fenton＇s oxidation were acquired as： Fe^2＋ dose 6.0 mmol/L; H2O2 dose 3000 mg/L; and reaction time 6 h. The second step biological treatment could ensure an effluent COD below 200 mg/L under an HRT of 10 h following the Fenton＇s treatment.