膜生物反应器中膜污染层胞外多糖性质及污染特征

胞外多糖是污水处理膜生物反应器中的重要膜污染物质,经醇析、Sevag法去除蛋白质、层析纯化、透析、冷冻干燥得胞外多糖样品。紫外光谱扫描鉴定该胞外多糖样品不含核酸及蛋白质,分别采用HPLC、GC、FT-IR及SEM等手段对其性质进行分析,考察其对聚偏氟乙烯膜的污染特征。结果表明,所得胞外多糖的重均分子量Mw为4.8×106,糖苷键类型主要为1-3和1-6型,是由葡萄糖、鼠李糖、木糖、甘露糖等组成、具有高度分枝网状结构的杂多糖。胞外多糖膜污染过程受沉积层控制,膜的主要污染形式为胞外多糖在膜表面的沉积。     

GA-g-PAMPS/AA/ST凝胶的制备及对亚甲基蓝吸附性能

采用微波辐射技术,通过接枝共聚反应制备了阿拉伯胶（GA）-g-2-丙烯酰胺-2-甲基丙磺酸（AMPS）/丙烯酸（AA）/海泡石黏土（ST）（GA-g-PAMPS/AA/ST）复合水凝胶,利用FTIR、XRD、SEM对复合水凝胶进行了表征,研究了水凝胶对水溶液中亚甲基蓝（MB）染料的吸附性能.结果显示：GA、ST和AA与AMPS发生了接枝共聚反应,形成具有均匀三维网络结构的复合水凝胶.0.025g水凝胶可以使体积为50mL、pH值为6.4、浓度为600mg/L的MB溶液的吸附量和吸附率分别达1146mg/g和95.5%,水凝胶具有较好的重复利用性能.Freundlich等温模型和准二级动力学模型能更好地描述吸附过程.热力学研究表明水凝胶对亚甲基蓝吸附是自发、吸热和不可逆的过程.该水凝胶可用作阳离子染料和阳离子型污染物的潜在候选生物质吸附剂.     

钙、镁离子在水流作用下对铜绿微囊藻生长的影响

为了解在"引江济太"过程中大量钙、镁离子的引入对铜绿微囊藻生长的影响,本实验在控制温度和光照条件下,室内模拟不同钙、镁离子浓度在两个特征流速5 cm/s和15 cm/s下微囊藻的生长。实验结果表明,微囊藻藻密度随钙、镁离子浓度的增加而增加,流速在15cm/s下微囊藻最大藻密度(9 236.4×104cell/mL)是流速为5 cm/s下最大藻密度(2 873.72×104cell/mL)的3倍,流速为15 cm/s下微囊藻最大比增长速率均较5 cm/s下的高。这可能是在水流产生的剪切力作用下藻细胞胞外多糖增加,粘附更多的钙、镁离子更利于钙、镁离子迁移到胞内,同时胞外附着的钙、镁离子尤其钙离子形成桥联,使微囊藻细胞形成群体产生微环境利于微囊藻的生长。水流对微囊藻利用钙、镁离子有重要的影响,这为有效调水抑制蓝藻生长提供科学依据。     

碱法提取的混合海洋硅藻粗多糖对铅离子的吸附特性研究

采用浓碱法(40 mg·mL~(-1)NaOH)辅助冻融、加热方法提取混合海洋硅藻粗多糖,通过比较粗多糖得率、总糖、蛋白质及硫酸基含量筛选提取方法,并利用最佳方法提取的粗多糖作为生物吸附剂对Pb~(2+)进行吸附.提取实验结果表明,最优的提取方法为浓碱(40 mg·mL~(-1)NaOH)-冻融法,其粗多糖得率为33.14%,总糖含量为31.65%(480 nm)和27.27%(490 nm),蛋白质含量为6.44%、硫酸基含量为3.23%.吸附结果表明,该粗多糖对Pb~(2+)的吸附在2 h左右达到平衡,在180 r·min-1、25℃、pH=4~6时吸附效果最佳;在初始浓度为600 mg·L-1混合重金属溶液条件下,粗多糖对Cd~(2+)、Pb~(2+)、Cu~(2+)和Ni~(2+)的吸附容量大小顺序为:Ni~(2+)Cu~(2+)Cd~(2+)Pb~(2+)(以物质的量浓度为单位进行评价);粗多糖中含有的小分子糖类杂质对Pb~(2+)吸附的贡献远远大于蛋白质杂质.吸附动力学拟合结果表明,此硅藻粗多糖对Pb~(2+)的吸附过程更符合伪二级动力学模型,且Langmuir方程拟合的可决系数R2大于0.9,说明粗多糖对Pb~(2+)的吸附为单层吸附.     

微生物絮凝剂PF-2的成分分析及絮凝机制研究

筛选得到的荧光假单胞菌(Pseudomonas fluorescens)产生的絮凝剂——PF-2在处理高岭土悬浊液时,具有用量少、絮凝效果好等优点,对高岭土悬浊液的絮凝率可达96.5%.呈色反应和紫外扫描的测定结果表明,PF-2大部分为胞外分泌的多糖,含有少量的核酸,提取后每升发酵液可制得絮凝剂粗品2.3 g;ζ电位测定及氢键和离子键检验结果表明,PF-2与高岭土颗粒之间的作用力为离子键;红外光谱扫描分析PF-2中含有O-H、C-H、C＝C和C-O-C等多糖的特征吸收峰;利用扫描电镜观察絮体形态表明,絮体结构密实,其絮凝机制为PF-2和高岭土以离子键的形式结合,之后通过架桥作用絮凝沉淀.     

Microwave-Assisted Solvent-Free or Aqueous-Based Synthesis of Biodegradable Polymers

Microwave radiation was used as the energy source for various types of chemical derivatizations of polysaccharides and for the synthesis of biodegradable polyesters in solvent-free or aqueous-based reaction systems. A medium to high degree of substitution was obtained for starch acetates, starch succinates, carboxymethyl konjac, aminated starch, and aminated chitosan. Ring-opening polymerization of lactide and -caprolactone proceeded rapidly even at low power output in the presence of tin octanoate catalyst. Complete monomer conversion and high molecular weight were achieved in less than 6 minutes under nonisothermal conditions. The yield rapidly increased with increasing power output and showed no significant change in a wide range of batch sizes. Polycaprolactone was successfully grafted from starch and konjac acetate in 3 minutes, yielding as high as 24% grafting efficiency and 25% grafting degree.     

Application and mechanism of polysaccharide extracted from Enteromorpha to remove nano-ZnO and humic acid in coagulation process

Green source Ep was extracted from marine alga waste. The molecule model structure of Ep was studied and constructed. PAC-Ep coagulation system improves the efficiency of removal efficiency. Synergistic effects between NPs and HA make a big difference to enhance efficiency. Mechanism is charge neutralization, hydrogen bonding and adsorbing-complexing Enteromorpha polysaccharide (Ep) extracted from alga a novel green coagulant aid for nanoparticles (NPs) and heavy metal ions removal and the structure of EP was intensively studied in this study. The integration of Ep with polyaluminum chloride (PAC-Ep) coagulants exhibited higher coagulation performance than that of the polyaluminum chloride (PAC) because of the negatively charged NPs suspension and humic aid (HA) solution. Significant high removal efficiencies of dissolved organic matter (94.1%), turbidity (99.3%) and Zn ions (69.3%) were achieved by the PAC-Ep coagulants. The dual-coagulation properties of PAC-Ep for different pollutants was based on multiple mechanisms, including (i) Al³⁺ charge neutralization; (ii) hydroxy aluminum hydroxyl bridging formed polynuclearhydroxy complexes bridge and sweep colloidal particles; (iii) adsorption and bridging of Ep chain for the NPs and heavy metal ions. Results indicated that the destabilization of colloid was induced by the coexisting HA and higher removal was achieved as ions adsorption was enhance in the presence of HA complexation. On the basis of that, the extraction of polysaccharide is a promising candidate for its high coagulation performance in water treatment.     

信号分子在好氧颗粒污泥形成过程中的作用

采用人工配水成功培养好氧颗粒污泥,针对絮状污泥颗粒化过程中污泥的理化性质、污染物去除效率、胞外聚合物和信号分子变化进行相关分析.结果发现,在好氧颗粒污泥的形成过程中,污泥对污染物去除能力明显提高.与接种污泥相比,成熟的好氧颗粒污泥对COD、NH₄⁺-N和PO₄^3--P去除率分别提高20%、36%和57%.好氧颗粒污泥中胞外蛋白质和多糖含量分别增加了116和31mg/gMLVSS.采用激光共聚焦扫描显微镜对接种污泥和好氧颗粒污泥进行空间表征,发现后者蛋白质含量明显增加,说明蛋白质在污泥颗粒化过程中具有重要作用;磷酸二酯酶活性总体呈现上升趋势,第二信使环二鸟苷酸（cyclic diguanylic,c-di-GMP）含量先增加后降低,与胞外聚合物中蛋白质和多糖的变化规律相似.通过SPSS软件进一步分析得知,c-di-GMP与蛋白质相关系数R²=0.92871,呈极显著相关性;与紧密结合型胞外聚合物中蛋白质相关系数R²=0.89025,呈显著相关性,推测c-di-GMP可能是通过指导紧密结合型胞外聚合物中的蛋白质合成以促进好氧颗粒污泥的形成.     

Toxicity of cadmium to the green alga Parachlorella kessleri: Producing Cd-loaded algae for feeding experiments

The effects of Cd at environmental concentrations (0–32 µg/L) on the green alga Parachlorella kessleri were investigated. At about 3 µg Cd/L, toxic effects of Cd are becoming evident, much lower than reported previously. At 8 µg/L and higher, pronounced adverse effects on growth, cell morphology, size, and physiological state are seen. Therefore, levels lower than 2 µg Cd/L should be employed to produce Cd-carrying algae for feeding experiments with organisms on the next trophic level, e.g. mussels, to avoid reduced food uptake. These findings also suggest that aquatic ecosystem conditions can be indirectly influenced via the impairment of the nutritional value of algae since they are the basic organisms of aquatic food chains.     

长梗黄精主根与须根多糖的提取工艺研究

对长梗黄精主根与须根多糖的提取工艺进行了研究.在对乙醇浓度、浸提温度、浸提时间和粉碎粒度等进行单因素试验的基础上,通过正交试验确定了长梗黄精主根与须根多糖提取的最佳工艺条件,即对长梗黄精主根多糖的提取最佳条件为乙醇浓度80％、浸提温度80℃、浸提时间50min、颗粒大小40目,此时多糖提取率为18.754％;而对长梗黄精须根多糖的提取最佳条件为乙醇浓度70％、浸提温度60℃、浸提时间30min、颗粒大小80目,此时多糖提取率为16.652％.须根多糖含量与主根含量差异性不显著,故须根的利用价值也很高,有待开发利用.