利用洗脸盆的排水保护地漏存水弯水封

简要介绍了我国地漏的现状与问题,并结合SARS病毒在香港淘大花园传播的原因,说明了地漏安全问题的严重性。根据香港城市大学的实验,提出了利用洗脸盆排水保护地漏存水弯水封,从而解决地漏的安全问题。     

冲模CAD系统中装配图消隐算法

介绍了几种实现模具装配图消隐的方法 ,分析了各种方法的缺陷。根据模具装配图中各零件之间的相互关系 ,对模具零件进行了分类 ,并提出了一种新的实现模具装配图消隐的方法图形实体重构法     

安钢高炉出铁场除尘工程实践

六号高炉炉前出铁场工程是一项工业污染治理项目，该项目结合安钢实际，利用较少的投资，解决了多年困扰炼铁厂的炉前烟尘污染的问题，该技术结合目前国内中小高炉出铁场综合治理的经验，提出了顶吸加侧吸的综合捕集方式，极大地改善了出铁场的烟尘污染状况，同时回收的粉尘又有极高的利用价值，取得了一定的经济效益。     

汽车组装流水线作业工人工效学调查研究

对汽车组装流水线作业工人的作业体位、人机测量、劳动状况和生产环境的调查结果表明，过分低头、向前弯腰、手抬高过肩、手抬高过头、长时间站立、工作时间率较高、工作场所照度不足以及噪声值超标可能是存在的主要工效学问题，是导致慢性肌肉骨骼损伤的重要因素，应根据有关标准和法规，采取相应的劳动保护和工效学改进措施     

抚顺石化公司硫磺回收装置的扩建和改造

抚顺石化分公司石油三厂原有硫磺回收装置的处理能力已经不能满足生产的需要,2002年对硫磺回收装置进行了扩建和改造。该装置采用了一段高温转化、二级催化转化的克劳斯工艺,采用揝SR敾乖?吸收工艺处理尾气。扩能改造后,新增的尾气处理能力与硫磺回收能力相配套,排放的废气符合国家现行的环保标准。该装置工艺路线合理、可靠,硫回收率高。     

丁腈橡胶密封圈高温老化行为——自由状态和承压状态

目的研究丁腈橡胶密封圈自由状态和承压状态下的高温老化行为。方法以拉伸强度和拉断伸长率为参数,对各温度下的老化行为进行表征和分析。结果 70℃条件下机械应力大大加快了橡胶密封件拉伸强度的下降速率,以致试验64 d时拉伸强度甚至比110℃时还低,拉断伸长率的下降速率也明显加快了;90℃加速条件下机械应力对拉伸强度的下降有一定的促进作用,但对拉断伸长率的变化基本无影响;110℃加速条件下机械应力对拉伸强度和拉断伸长率均没有明显的影响。结论机械应力在较低温度下可以显著促进丁腈橡胶密封圈热氧老化,高温条件下促进作用不明显。     

Relationships between vitamin A and PCBs in grey seal mothers and pups during lactation

A previous study has shown a simultaneous increase of vitamin A and PCBs in grey seal (Halichoerus grypus) milk at late lactation (Debier et al., 2004). Here we sought to understand this unexpected relationship by comparing the dynamics of vitamin A and PCBs in the different tissue compartments of transfer. Lactating grey seals and their pups were sampled longitudinally in Scotland during the 2006 breeding season. As blubber reserves decreased, concentrations of vitamin A and PCBs increased during lactation in the inner layer of maternal blubber. A concomitant rise was observed in milk and consequently in the serum of suckling pups. The similar dynamics of vitamin A and PCBs in milk and inner blubber suggest a common mechanism of mobilisation from maternal body stores and transfer into the milk. A panel data analysis highlighted a negative impact of PCBs in milk and pup serum on vitamin A status in pup serum.     

核电燃料元件厂环境辐射监测与评价

本文对 1994～ 1998年核电燃料元件生产所排放的放射性流出物及环境辐射进行了监测分析。结果表明 ,在正常生产运行情况下 ,放射性流出物对周围公众造成的年最大个人有效剂量当量是 7 2 6× 10 -2 mSv ,远低于公众剂量限值。评价半径为80km范围内的集体有效剂量当量为 4 70× 10 -2 人·Sv/a。     

Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers

Controlled release (CR) formulations of azadirachtin-A, a bioactive constituent derived from the seed of Azadirachta indica A. Juss (Meliaceae), have been prepared using commercially available polyvinyl chloride, polyethylene glycol (PEG) and laboratory synthesized poly ethylene glycol–based amphiphilic copolymers. Copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of azadirachtin-A, release in water from the different formulations was studied. Release from the commercial polyethylene glycol (PEG) formulation was faster than the other CR formulations. The rate of release of encapsulated azadirachtin-A from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of azadirachtin-A, in water ranged from 0.47 to 1.18 in the tested formulations. The release was diffusion controlled with a half release time (t_1/2) of 3.05 to 42.80 days in water from different matrices. The results suggest that depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period.