Heat dissipation characteristic in the intake grille and radiator of a fuel cell vehicle

ABSTRACT

In this study, a three-dimension (3D) computational model was proposed to investigate the flow and heat transfer characteristics of the intake grilles of two different fuel cell vehicles. The models of the intake grilles were constructed according to the actual sizes of two vehicles, namely, Roewe 950 and Toyota Mirai, considering the heat dissipation unit to simplify the heat transfer model of the vehicle. The results showed that relative to Roewe 950, Mirai intake air flow rate was approximately 10% higher, the heat transfer capacity was approximately 7% higher, and the intake grille area was larger. The coolant outlet temperature of Mirai was lower than that of Roewe 950, which was beneficial for the long term and stable operation of a fuel cell. This comparative study provided guidance for the intake grille and radiator design of fuel cell vehicles. The only difference between fuel cell vehicles on the market and conventional vehicles was that in the former, the internal combustion engine was replaced with a fuel cell stack, which had insufficient heat transfer capacity because of the reducing temperature difference. Increasing the intake grille area and the heat exchange capacity of the radiator were the key issues for the development of fuel cell vehicles. In this study, an optimal window opening angle of the radiator fin of 23° provided a maximal heat transfer coefficient.     

液氮泡沫发生器内流动特性研究

低温液氮与泡沫混合液直接接触产生氮气泡沫是一种新型的掺混形式,利用液氮高汽化比的特点,搭建液氮泡沫可视化实验装置,进行氮气-水两相流及液氮泡沫流动特性的研究。结果表明,液氮相变产生大量氮气,其与泡沫液混合产生泡沫,温度有所回升,最终趋于泡沫混合液温度;管路沿程压降较小;液氮射流破碎及流动过程可分为6个区域:低温液氮区、向上循环翻滚区、滞留区、泡沫与泡沫混合液混合区、致密泡沫区、泡沫混合液区。流体向下游流动过程中持续发泡;为防止管路结冰,需合理控制泡沫混合液与液氮流量。     

The passion bug: How and when do leaders inspire work passion?

Drawing from signaling theory, we propose a work passion transfer model where leaders' passion is transmitted to employees through the former's leadership style and is contingent on employees' perceived importance of performance to self-esteem (IPSE). Data from 201 supervisor–employee dyads from the health-care industry show that leaders' harmonious passion led to employees' harmonious passion through charismatic leadership, whereas contingent reward leadership accounted for the transfer of obsessive passion; IPSE did not play a moderating role for either form of passion. Results from a supplementary study further reveal that the link between leadership and employee passion operated through employees' perception of leader passion and that employees' IPSE accentuated for the relationship between perceived leader obsessive passion and employees' obsessive passion. This study advances research in work passion, leadership, and signaling theory and provides important implications for managerial practice.     

Sulfur cycle as an electron mediator between carbon and nitrate in a constructed wetland microcosm

• Fe(III) accepted the most electrons from organics, followed by NO₃^‒, SO₄^2‒, and O₂. • The electrons accepted by SO₄^2‒ could be stored in the solid AVS, FeS₂-S, and S⁰. • The autotrophic denitrification driven by solid S had two-phase characteristics. • A conceptual model involving electron acceptance, storage, and donation was built. • S cycle transferred electrons between organics and NO₃^‒ with an efficiency of 15%. A constructed wetland microcosm was employed to investigate the sulfur cycle-mediated electron transfer between carbon and nitrate. Sulfate accepted electrons from organics at the average rate of 0.84 mol/(m³·d) through sulfate reduction, which accounted for 20.0% of the electron input rate. The remainder of the electrons derived from organics were accepted by dissolved oxygen (2.6%), nitrate (26.8%), and iron(III) (39.9%). The sulfide produced from sulfate reduction was transformed into acid-volatile sulfide, pyrite, and elemental sulfur, which were deposited in the substratum, storing electrons in the microcosm at the average rate of 0.52 mol/(m³·d). In the presence of nitrate, the acid-volatile and elemental sulfur were oxidized to sulfate, donating electrons at the average rate of 0.14 mol/(m³·d) and driving autotrophic denitrification at the average rate of 0.30 g N/(m³·d). The overall electron transfer efficiency of the sulfur cycle for autotrophic denitrification was 15.3%. A mass balance assessment indicated that approximately 50% of the input sulfur was discharged from the microcosm, and the remainder was removed through deposition (49%) and plant uptake (1%). Dominant sulfate-reducing (i.e., Desulfovirga, Desulforhopalus, Desulfatitalea, and Desulfatirhabdium) and sulfur-oxidizing bacteria (i.e., Thiohalobacter, Thiobacillus, Sulfuritalea, and Sulfurisoma), which jointly fulfilled a sustainable sulfur cycle, were identified. These results improved understanding of electron transfers among carbon, nitrogen, and sulfur cycles in constructed wetlands, and are of engineering significance.     

地铁多线换乘车站火灾模型实验研究—(1)模型装置设计

为研究地铁网络化运营枢纽车站火灾烟气扩散特征和防排烟技术，根据工程资料和标准规范对典型多线换乘车站进行1∶10火灾实验模型设计，并依据设计方案完成车站模型主体结构和通风排烟系统的搭建，同时在各个防烟分区设计安装温度、流速、烟气浓度和热辐射测量装置，可实现对“T”形、“十”形和“L”形换乘等不同换乘形式车站的火灾场景模拟和危险参数测量。研究结果表明:该模型装置能够开展一系列针对不同换乘形式和通风模式的火灾实验，对于全面揭示大型换乘车站火灾烟气运动规律、验证并优化火灾防排烟设计方法、支撑复杂结构枢纽车站火灾烟气控制技术具有重要意义。     

考虑保护层响应的炼化过程系统风险动态转移模型

为适时、有效地控制炼化过程系统风险,以模糊Petri网(FPN)为基础,针对炼化系统动态退化性和系统中保护层对风险转移的干预性,建立考虑保护层响应的炼化过程系统风险动态转移模型。描述基于FPN的保护层作用动态机制,分析炼化系统在保护层干预下,从非正常干扰触发开始至炼化系统退化过程的风险变化趋势。最后通过正己烷缓冲罐案例分析验证模型。结果表明:正己烷缓冲罐在开始运行的30 000 h内,系统风险等级呈阶段性变化,在工作的前16 800 h,风险为Ⅰ级;第16 800~27 600 h,风险为Ⅱ级;第27 600~30 000 h,风险为Ⅲ级。     

动态校准仪臭氧间接传递技术

对5台主流动态校准仪开展臭氧间接传递技术研究,对动态校准仪的准确性、可靠性、稳定性及臭氧传递的线性方程等性能参数进行了实验室考察。总体而言,发生型动态校准仪和分析型动态校准仪均可用于臭氧传递工作中。分析型动态校准仪可直接进行臭氧传递,发生型动态校准仪在臭氧传递前必须进行预校准。建议至少每3个月对发生型动态校准仪进行1次臭氧传递,每6个月对分析型动态校准仪进行1次臭氧传递。     

二氧化碳资源化技术研究进展

过量的二氧化碳(CO2)排放可导致温室效应的不断加剧,因此CO2减排受到越来越多的关注,其中将CO2转化为附加值较高的化工产品,即CO2资源化利用技术不仅可实现CO2减排,同时具有一定的经济效益。CO2资源化利用技术主要包括光化学还原法、电化学还原法和催化转移氢化法等。重点介绍并总结了以上3种方法的特点、优势和不足,指出未来需研究解决的关键问题和研究方向,为实现高效的CO2资源化利用提供借鉴和参考。     

环境规制、省际产业转移对污染迁移的空间溢出效应

目前我国正在积极地探寻经济增长高质量发展,生态环境与经济持续、稳定的和谐发展至关重要。虽然政府制定了相关的环境治理政策,但我国环境治理整体效果仍然欠佳。自从分税制改革以来,地方政府为了获得较高经济效益,会放松对环境管理,导致环境治理高投入低成效。同时,由于区域经济发展不平衡导致政府在制定相关环境治理政策时带有区域性特点,迫使高污染高能耗企业迁移至环境规制相对薄弱的地区,由此产生污染迁移的现象。基于此,对2003—2017年30个省区市(港澳台和西藏除外)环境污染总指数的空间溢出效应进行探讨,构建动态空间杜宾模型研究环境规制、省际产业转移对污染迁移的影响。研究结果表明:①环境规制总体上对环境污染具有显著直接效应且存在正向空间溢出效应,当某省环境规制强度增加,环境污染总指数会降低,从而引起污染向相邻省份转移,造成相邻省份的环境污染总指数上升。②省际产业转移整体上对环境污染具有显著直接效应且存在负向空间溢出效应,当某省的产业转移到相邻省份时,会缓解本省环境污染,却加重相邻省份的环境污染程度。这就需要中央政府加强对于各省区市的环境管控,统筹各区域的联防联治机制。产业转移承接省份在招商引资的过程中不仅要考虑本省环境承载能力和环境治理能力,还要考虑入驻企业自身污染排放处理能力,并将污染排放指数纳入筛选条件。同时,产业转移承接省份要引入企业的生产工艺、技术、研发团队等,运用技术溢出效应提升区域环境治理水平。     

三岔河沿岸植物铅、镉富集特性的研究

以紫茎泽兰（EupatoriumadenophorumSpreng）、青蒿（HerbaArtemisiaeAnnuae）、三叶鬼针草（Bidenspilosa）、野牡丹（MelastomaAfffine D．Don）、光叶蕨（Knuiwatsukiacuspidata）为例,分别在河边、路边、山上和污水灌溉的旱地4个采样点采取5种植物的根部和茎叶,测量重金属元素Pb、Cd的含量、富集系数和转移系数并分析数据。结果表明,各种植物不同器官在不同环境中对重金属元素Pb、Cd的富集和转移水平各不相同,就平均水平来说三叶鬼针草对重金属Pb、Cd的富集系数较大,转移系数也高,但其对Pb的转移量明显高于Cd的转移量;紫茎泽兰对重金属元素Cd的富集和转移速度相对高于其它4种植物,说明紫茎泽兰对Cd的吸收和转移比较快,可作为受镉污染土壤进行改良的备选植物种。