Effect of substituents in hydroxyl radical-mediated degradation of azo pyridone dyes: Theoretical approaches on the reaction mechanism

Understanding the degradation behavior of azo dyes in photocatalytic wastewater treatment is of fundamental and practical importance for their application in textile-processing and other coloration industries. In this study, quantum chemistry, as density functional theory, was used to elucidate different degradation pathways of azo pyridone dyes in a hydroxyl radical (HO^?)-initiated photocatalytic system. A series of substituted azo pyridone dyes were synthesized by changing the substituent group in the para position of the benzene moiety, ranging from strong electron-donating to strong electron-withdrawing groups. The effect of dye molecular structure on the photocatalytic degradation reaction mechanism was analyzed and quantification of substituent effects on the thermodynamic and kinetics parameters was performed. Potential energy surface analysis revealed the most susceptible reaction site for the HO^? attack. The calculated reaction barriers are found to be strongly affected by the nature of substituent group with a good correlation using Hammett σ_p constants and experimentally determined reaction rates. The stability of pre-reaction complexes and transition state complexes were analyzed applying the distortion-interaction model. The increased stability of the transition state complexes with the distancing from the substituent group has been established.     

碳量子点掺杂氮化碳提高的光电化学阴极保护性能研究

目的研究g-C_3N_4/C-Dots-M复合材料的光电化学阴极保护性能。方法采用X射线衍射(XRD)、扫描电子显微镜(SEM)和紫外可见漫反射光谱技术对样品的晶体结构、微观形貌和光吸收性能进行表征。通过电化学测试可见光照射下g-C_3N_4/C-Dots-M复合材料光电极偶联316L不锈钢后的光电化学阴极保护电流密度和电位变化曲线,研究材料的光电化学阴极保护性能。结果可见光照射下,该偶联体系的光致混合电位下降至-0.43 V(vs. Ag/AgCl),光电化学阴极保护电流密度达到4.3μA/cm。结论得益于碳量子点优异的电子传导特性,g-C_3N_4/C-Dots-550复合材料的光电化学阴极保护性能比纯g-C_3N_4的明显增强。该复合材料在光电化学阴极保护方面展现了较大的应用潜力。     

A metal-free composite photocatalyst of graphene quantum dots deposited on red phosphorus

A simple approach to enhance the photocatalytic activity of red phosphorus(P) was developed.A mechanical ball milling method was applied to reduce the size of red P and to deposit graphene quantum dots onto red P. The product was characterized by scanning electron microscopy, transmission electron microscopy, contact angle measurements, zeta-potential measurements, X-ray diffraction and UV–vis absorption spectroscopy. The product exhibited high visible-light-driven photocatalytic performance in the photodegradation of rhodamine B.     

Enhanced photocatalytic activity of quantum-dot-sensitized one-dimensionally-ordered ZnO nanorod photocatalyst

An efficient photocatalyst was fabricated by assembling quantum dots （QDs） onto one-dimensionally-ordered ZnO nanorods, and the photocatalytic properties for Methyl Orange degradation were investigated by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, UV-Vis-NIR absorption spectroscopy and photoluminescence. The results indicate that the catalyst with assembled QDs is more favorable for the degradation than the pristine ZnO nanorods. The QDs with core-shell structure lower the photocatalytic ability due to the higher carder transport barrier of the ZnS shell layer. Besides its degradation efficiency, the photocatalyst has several advantages given that the one-dimensionally-ordered ZnO nanorods have been grown directly on indium tin oxide substrates. The article provides a new method to design an effective and easily recyclable photocatalyst.     

An environmental impact assessment of quantum dot photovoltaics (QDPV) from raw material acquisition through use

Some emerging technologies are expected to be pivotal for solving many of the environmental challenges faced today, especially those related to energy. However, many of these technologies may incur significant environmental impacts over their life cycle, while having environmental benefits during their use. This paper presents results of a Life Cycle Assessment (LCA) of a proposed type of nanophotovoltaic, quantum dot photovoltaic (QDPV) module. The LCA is confined to the stages of raw materials acquisition, manufacturing, and use. The impacts of QDPV are compared with other types of PV modules and energy sources - both renewable and nonrenewable. To provide a comprehensive comparative assessment, QDPV modules were compared with mature as well as emerging PV types for which data are available. Comparative assessment with other types of energy sources includes coal, oil, lignite, natural gas, diesel, nuclear, wind, and hydropower.QDPV modules may have the potential to overcome two current barriers of solar technology: low efficiencies and high manufacturing costs. If higher efficiencies are realized, QDPV modules could pave the way to large scale implementation of solar energy, helping nations move toward greater energy independence. On the other hand, candidate materials as quantum dots for solar cell applications are mostly compound semiconductors such as cadmium selenide, cadmium telluride, and lead sulfide which may be toxic and for which renewable options are limited. Toxic effects of these materials may be exacerbated by their nanoscale features.The LCA was carried out using the software SimaPro, and the Ecoinvent Life Cycle Inventory (LCI) database supplemented with available literature and patent information. Our results indicate that while QDPV modules have shorter Energy PayBack Time (EPBT), lower Global Warming Potential (GWP), SO_x and NO_x emissions than other types of PV modules, they have higher heavy metal emissions, underscoring the need for investigation of emerging technologies, especially nano-based ones, from a life cycle perspective. QDPV modules are better in all impact categories assessed than carbon-based energy sources but they have longer EPBT than wind and hydropower and higher GWP.     

CdSe/ZnS量子点对稀有鮈鲫胚胎发育的影响及其氧化应激作用

本研究以稀有鮈鲫(Gobiocypris rarus)为对象,研究了不同浓度CdSe/ZnS量子点(QDs)暴露下,稀有鮈鲫胚胎发育过程中自主运动频率、内心率和体长的变化,以及利用体内超氧化物歧化酶(SOD)和丙二醛(MDA)作为毒性指标,反映CdSe/ZnS QDs暴露对稀有鮈鲫胚胎发育的氧化应激作用.结果显示:CdSe/ZnS QDs对稀有鮈鲫胚胎72 hpf(hours post fertilization)的半致死浓度(LC50)为319.629 nmol·L-1,96 hpf的半致畸浓度(EC50)为203.312 nmol·L-1.CdSe/ZnS QDs暴露不仅影响稀有鮈鲫胚胎死亡率、畸形率、自主运动频率、孵化时间和孵化率,而且使其内心率减缓、体长缩短,导致胚胎卵凝结,心包囊肿,出现脊椎弯曲等多种毒性现象.同时发现,CdSe/ZnS QDs暴露导致稀有鮈鲫体内MDA含量增加以及SOD活力的降低.这表明CdSe/ZnS QDs对稀有鮈鲫胚胎发育具有致畸、致死作用,而氧化应激可能是引起其胚胎致畸、致死的重要机制之一.     

BiOBr/Bi2MoO6异质结的构筑及对甲基橙的吸附/光催化性能的协同作用机制

采用简单的沉积-沉淀法合成了BiOBr/Bi_2MoO_6(BOB/BMO)异质结,采用XRD、XPS、TEM、SEM、EDS、FT-IR、UV-Vis-DRS、PL、PC和EIS等测试技术对光催化剂的物相组成、形貌、光吸收特性和光电化学性能等进行系统表征,并以模型污染物甲基橙(MO)的吸附和光催化降解作为探针来评价BiOBr/Bi_2MoO_6异质结的吸附性能与光催化活性增强机制.SEM和TEM分析结果表明,所得Bi_2MoO_6微球由大量厚度约为20~50 nm的纳米片组成;沉淀-沉积法所得样品的形貌分析显示,尺寸约为10 nm的BiOBr量子点均匀沉积在Bi_2MoO_6微球表面,形成的新颖的BOB/BMO异质结.N2吸附/脱附结果表明,Bi_2MoO_6和BiOBr形成异质结具有大的比表面积(64.94 m2·g-1),且表面孔结构丰富.吸附/光催化降解实验结果表明,与纯Bi_2MoO_6或者BiOBr相比,BOB/BMO异质结表现出更好的吸附性能和光催化活性.吸附/光催化协同作用机理分析表明,BOB/BMO异质结具有大的比表面积和丰富的孔结构是其吸附性能增强的主要原因.此外,光致发光(PL)谱、光电流(PC)和交流阻抗(EIS)分析进一步揭示了BOB/BMO异质结有利于光生载流子的分离与转移,导致光催化活性增强,二者的协同作用使其对MO具有优越的去除性能.此外,BOB/BMO异质结较稳定,重复使用性能良好,有望用于MO废水的实际处理.     

Altered toxicity of organic pollutants in water originated from simultaneous exposure to UV photolysis and CdSe/ZnS quantum dots

The paper reports unforeseen results of increased toxicity of water, subsequent to interactions between CdSe/ZnS quantum dots (QDs), phenol and toluene under UV irradiation. The consistent pattern of changes in measured toxicity (TU) was observed and correlated with degradation of phenol and/or toluene. Spearman rank coefficients (SRCs) for data pairs sum-parameters vs. TU were calculated. The highest correlation between toxicity and degradation by-products was observed for hydroquinone (0.86) and catechol (0.89). The presence of QDs in tested concentration range in the absence of UV has shown low toxicity and no interactions with phenol and/or toluene. The leak of constituent core and shell metal ions was observed. The minor differences in physical characteristics of tested QDs of the same chemical composition led to rather different degradation patterns of phenol and toluene, and the amount of leak of the metal ions as well.     

Review of the application of quantum dots in the heavy-metal detection

Heavy-metal contamination is a major concern, as excessive heavy metals produce environmental pollution, and the cumulative effects of heavy metals in vivo pose a major threat to human health. There is an urgent need for a rapid, sensitive, and efficient method for detecting heavy metals. Quantum dots (QDs) are in the category of semiconductor nanocrystals whose radii are less than or close to the exciton Bohr radius. QDs possess a potential in the biological and medical fields to function as a new type of fluorescent marker, because of their unique and tunable photophysical properties, which include broad excitation spectrum, narrow emission spectrum, tunable emission wavelengths, and negligible photobleaching. In recent years, QDs made significant progress in quantitative analysis by providing a new approach for determination of chemical content analysis. The aim of this study was to review the research progress of QD detection of heavy metals in water and consider the challenges and future outlook for QD-based sensors for heavy-metal ions.     

MoS2 quantum dots based MoS2/HKUST-1 composites for the highly efficient catalytic oxidation of elementary mercury

Due to the ever-tightening regulation on mercury emission in recent decades, there is an urgent need to develop novel materials for the removal of elemental mercury at coal-fired power plants. In this study, a series of MoS₂ quantum dots (QDs)-based MoS₂/HKUST-1 composite materials were prepared. It is found that MoS₂ QDs were encapsulated by HKUST-1 and enhanced the crystallinity and specific surface area of HKUST-1. The MoS₂/HKUST-1 showed excellent performance in catalytic oxidation of Hg⁰ as compared with pristine HKUST-1. It is found that surface layer of lattice oxygens is active and participates in Hg⁰ oxidation, while the consumption of surface oxygens then leads to the formation of oxygen vacancies on the surface. These vacancies are effective in the adsorption and dissociation of O₂, which subsequently participates in the oxidation of Hg⁰. Moreover, the study on the influence of commonly seen gas components, such as SO₂, NO, NH₃ and H₂O, etc., on Hg⁰ oxidation demonstrated that synergistic effects exist among these gas species. It is found that the presence of NO promotes the oxidation of Hg⁰ using oxygen as the oxidant.