Investigation of performance enhancement of solar still incorporated with Gallus gallus domesticus cascara as sensible heat storage material

In this research work, the conventional single slope still (CSS) with egg shells of breed Gallus gallus domesticus cascara as sensible heat storage (SHS) material are studied experimentally to enhance the yield. In this experimental investigation, the proposed single slope still (PSS) with SHS material was made in comparison with the CSS to evaluate the productivity of fresh water under the same ambient conditions. Comparatively, this PSS has higher thermal conductivity than the CSS. The yield obtained from the PSS is 2.46 L/m², while the yield from the CSS is 2.07 L/m². The average rate at which the rise of output fresh water obtained from the PSS is 18% more than the fresh water output obtained from the CSS. The daily energy efficiency of the PSS is 26.07%, and for the CSS, it is only 22.25%. The daily exergy efficiency of the PSS is 2.36%, and for the CSS, it is only 1.67%. Since using the egg shell will employ as organic waste management and modification in this still is economical, less initial, and maintenance cost.

     

Underwater LNG release: Does a pool form on the water surface? What are the characteristics of the vapor released?

One of the scenarios of concern in assessing the safety issues related to transportation of LNG in a marine environment (ship or underwater pipeline) is the release of LNG underwater. This scenario has not been given the same level of scientific attention in the literature compared to surface releases and assessment of consequences therefrom. This paper addresses questions like, (1) does an LNG spill underwater form a pool on the water surface and subsequently evaporate like an LNG spill “on the surface” producing cold, heavier than air vapors?, and (2) what is the range of expected temperatures of the vapor, generated by LNG release due to heat transfer within the water column, when it emanates from the water surface?Very limited data from two field tests of LNG underwater release are reviewed. Also presented are the results from tests conducted in other related industries (metal casting, nuclear fission and fusion, chemical processing, and alternative fuel vehicles) where a hot (or cold) liquid is injected into a bulk cold (or hot) liquid at different depths.A mathematical model is described which calculates the temperature of vapor emanating at the water surface, and the liquid fraction of released LNG that surfaces, if any, to form a pool on the water surface. The model includes such variables as the LNG release rate, diameter of the jet at release, depth of release and water body temperature. Results obtained from the model for postulated release conditions are presented. Comparison of predicted results with available LNG underwater release test data is also provided.     

Improved performance of a biomaterial-based cation exchanger for the adsorption of uranium(VI) from water and nuclear industry wastewater

The amine-modified polyhydroxyethylmethacrylate (poly(HEMA))-grafted biomaterial (tamarind fruit shell, TFS) carrying carboxyl functional groups at the chain end (PGTFS-COOH) was prepared and used as an adsorbent for the removal of uranium(VI) from water and nuclear industry wastewater. FTIR spectral analysis revealed that U(VI) ions and PGTFS-COOH formed a chelate complex. The adsorption process was relatively fast, requiring only 120 min to attain equilibrium. The adsorption kinetic data were best described by the pseudo-second-order equation. The equilibrium adsorption data were correlated with the Sips isotherm model. The maximum U(VI) ions uptake with PGTFS-COOH was estimated to be 100.79 mg/g. The complete removal of 10 mg/L U(VI) from simulated nuclear industry wastewater was achieved by 3.5 g/L PGTFS-COOH. The reusability of the adsorbent was demonstrated over 4 cycles using NaCl (1.0 M) + HCl (0.5 M) solution mixture to de-extract the U(VI). The results show that the PGTFS-COOH tested is very promising for the recovery of U(VI) from water and wastewater.     

Evaporating liquid flow in a channel (An integral model based on shallow water flow approximation)

Liquefied Natural Gas (LNG) storage facilities generally include channels to convey potential spills of the liquid to an impoundment. There is increasing concern that dispersion of vapors generated by flow of LNG in a channel may lead to higher than limit vapor concentrations for safety at site boundary from channels that may be close to the dike walls. This issue is of recent concern to regulatory agencies, because the calculation of vapor hazard distance(s) from LNG flow in a channel is not required under existing LNG facility siting standards or regulations.An important parameter that directly affects the calculated LNG vapor dispersion distance is the source strength (i.e., the rate of vaporization of LNG flow from the wetted channel surfaces, as a function of spatial position and time). In this paper a model is presented which considers the variation of the depth of the flowing LNG with spatial location and time, and calculates the spatial and temporal dependence of the mass rate of vapor generation. Self similar profiles for the spatial variation of the thermal boundary layer in the liquid wetted wall and liquid depth variation are assumed. The variation with time of the location of the liquid spread front and the evaporation rate are calculated for the case of a constant LNG spill rate into a rectangular channel. The effects of two different channel slopes are evaluated. Details of the results and their impact on dispersion distances are discussed.     

Chemical and enzymatic interactions of Direct Black 38 and Direct Brown 1 on release of carcinogenic amines

Release of amine products from azo compounds is of considerable interest, since most of the metabolized amine products have toxic and carcinogenic characters. Moreover, most of the azo dyes are extensively used as coloring agents in inks, textiles, leathers, food and pharmaceutical industries. The present study emphasis on the quantification and comparison of amines released from water soluble dyes by (i) extra cellular protein (ECP) of Streptomyces sp. SS07 and by (ii) chemical methods. It has been observed that both the methods release considerable quantities of similar type of amine products. Release of amine compounds by ECP and chemical reduction in acid and alkaline sweat medium from a leather garment sample was also assessed. ECP (0.7852 mg protein/mg of ECP) releases benzidine and 4-amino biphenyl from Direct Black 38 and Direct Brown 1 as stable products at pH 9.2 and at 37 degrees C for a contact period of 24 h. On comparison with chemical reduction, it was observed that about 5-20% increase in the release of amine products by ECP was observed. However, more than 60% of amine products were released by chemical method from leather garment samples than direct treatment with ECP.     

Establishment the relationship between water quality parameter and micro plastic concentration for Adyar and Cooum estuary

Increasing micro plastic concentration in the marine environment is a severe threat to the marine ecosystem and indirectly to human society depending on the marine environment. Also, the surface and subsurface water quality parameters are the indicators of the usability of the water sources for human activities. The primary source of micro plastic is the water river systems from land to sea. This study establishes a correlation between water quality parameters and micro plastic concentration to find the most suitable quality parameter for finding the micro plastic concentration in urban coastal estuaries of Chennai coast, Tamil Nadu, India. Twenty samples from Adyar and Cooum estuaries were collected, with ten each on August 2019 and August 2020. They are tested for temperature pH, EC, Turbidity, TDS, DO, BOD, COD, Salinity and micro plastic concentrations. Correlation tests such as Pearson's and Spearman's are performed based on the initial Normality and Homogeneity test. The results show that all the parameters are significantly not correlated with the Micro plastic Concentration, and Micro plastic Concentration is considered an independent factor.     

Identification of hot spots and well managed areas of Pichavaram mangrove using Landsat TM and Resourcesat—1 LISS IV: an example of coastal resource conservation along Tamil Nadu Coast, India

The present work is a multi-temporal satellite based study on the spatial dynamic of an important coastal habitat, the Pichavaram mangrove ecosystem, over a period of 15 years. The Pichavaram mangrove forest near Chidambaram, South India is the second largest mangrove forest in the world. Unsupervised classification, the Iterative Self Organising Data Analysis Technique (ISODATA), has been used to classify the mangrove cover into the open and dense classes. The status of the classes has been monitored using Landsat TM of 1991, 2001, and Resourcesat–1 LISS IV of 2006 satellite data. The study demonstrated that by classifying mangrove ecosystem into just the 3 classes using remote sensing data and by studying their temporal variations, it is possible to get a reasonably accurate picture of the extent and condition of the mangrove ecosystem. The total area of the Pichavaram mangrove showed a net increase of 2.51 km² within a span of 15 years (1991 to 2006). The hot spots that are at a risk of being degraded, and on the other hand, the mangrove areas that are well managed are identified using Geographical Information System (GIS) tools for the restoration and conservation measures.     

Study of changes in bacterial and viral abundance in formaldehyde-fixed water samples by epifluorescence microscopy

Accurate measurement of bacterial and viral abundance in coastal marine environments is important to understand the dynamics of microbial communities in these ecosystems. In this study, the effect of formaldehyde preservation on the abundance of bacteria and viruses in water samples from Cochin Backwater was determined by SYBR Green I staining and epifluorescence microscopy. The counts were determined for 45 days in samples fixed with 1?C6% formaldehyde. The results suggest rapid decline in counts of bacteria and viruses in samples preserved in formaldehyde, and the decline increased with increase in the final concentration of formaldehyde in the sample. The initial bacterial and viral counts in the sampling site were 5.2 × 10⁶/ml and 3.9 × 10⁷/ml, respectively. The bacterial count dropped by 5.1%, 53.3%, 55.7%, and 85% after 1, 7, 15, and 45 days, respectively, in sample fixed with 1% formaldehyde. The decline in viral counts was higher, being 32.4%, 47.9%, 68.1%, and 93% after 1, 7, 15, and 45 days, respectively. Storage of fixed samples at ??20°C did not halt the decline in microbial counts, suggesting that, irrespective of storage temperature, formaldehyde-fixed samples lead to underestimation of microbial counts.     

Effect of biosludge and biofertilizer amendment on growth of Jatropha curcas in heavy metal contaminated soils

The pot experiments were conducted to evaluate the effect of different concentrations of arsenic, chromium and zinc contaminated soils, amended with biosludge and biofertilizer on the growth of Jatropha curcas which is a biodiesel crop. The results further showed that biosludge alone and in combination with biofertilizer significantly improved the survival rates and enhanced the growth of the plant. With the amendments, the plant was able to grow and survive upto 500, 250 and 4,000 mg kg(-1) of As, Cr and Zn contaminated soils, respectively. The results also showed that zinc enhanced the growth of J. curcas more as compared to other metals contaminated soils. The heavy metal accumulation in plant increased with increasing concentrations of heavy metals in soil, where as a significant reduction in the metal uptake in plant was observed, when amended with biosludge and biofertilizer and biosludge alone. It seems that the organic matter present in the biosludge acted as metal chelator thereby reducing the toxicity of metals to the plant. Findings suggest that plantation of J. curcas may be promoted in metal contaminated soils, degraded soils or wasteland suitably after amending with organic waste.