地方利益相关者对作为水管理交流工具的模型生成数据的接受:伦讷河研究

本研究的目标是增加关于模型生成数据被用作水质管理的交流工具时,地方利益相关者接受该数据的知识.研究地区选在瑞典西南部的伦讷(R(o)nne(a))河流域.结果表明,模型生成数据起到了联合因素的作用.同时,利益相关者与提供的数据有关,主要问题为未考虑到的污染源、测定污染时缺乏信任、自然变化和延迟效应的影响的不确定性.确定了4组影响利益相关者接受模型生成数据的因素对其实际应用的信心,对所涉及的参与人员或对话资料提供者(如专家、决策者、媒体)的信心,参与者的社会特征(如年龄和职业),和数据的交流方式(如交流的语气、小组的构成、持续时间、对话的地理尺度).对给定的模型生成数据实际应用的公平性的感知,也是接受与否的一个重要因素.     

Preparation, Thermal Properties and Thermal Reliability of Form-Stable Paraffin/Polypropylene Composite for Thermal Energy Storage

This study is focused on the preparation, characterization, and determination of thermal properties and thermal reliability of paraffin/polypropylene (PP) composite as a novel form-stable phase change material (PCM) for thermal energy storage applications. In the composite, paraffin acts as a PCM when PP is operated as supporting material. The composites prepared at different mass fractions of paraffin (50, 60, 70, 80, and 90 w/w%) by solution casting method were subjected to leakage test by heating the composites over the melting temperature of the PCM. The paraffin/PP composite (70/30 w/w%) is found as the maximum paraffin containing composite and was characterized using Fourier transform infrared spectroscopy, optic microscopy, differential scanning calorimetry (DSC), and thermal gravimetric analysis (TGA) techniques. DSC analysis indicated that the form-stable paraffin/PP composite melts at 44.77–45.52 °C and crystallizes at 53.55–54.80 °C. It has latent heats of 136.16 and −136.59 J/g for melting and crystallization, respectively. These thermal properties make it potential PCM for latent heat thermal energy storage (LHTES) purposes such as solar space heating applications. Accelerated thermal cycling tests indicated that the form-stable PCM had good thermal reliability. TGA also showed that the form-stable PCM degrades in two distinguishable steps and had good chemical stability.     

Spatiotemporal changes of landscape pattern in response to deforestation in Northeastern Turkey: a case study in Rize

Recognition and understanding of landscape dynamics as a historical legacy of disturbances are necessary for sustainable management of forest ecosystems. This study analyzes spatial and temporal changes in land use and forest cover patterns in a typical mountain forest area in Rize Forest Enterprise of the Northeastern part of Turkey. The area is investigated by evaluated the temporal changes of spatial structure of forest conditions through spatial analysis of forest cover type maps from 1984 and 2007 using GIS and FRAGSTATS. The quantative evidences presented here showed that there were drastic changes in the temporal and spatial dynamics of land use/forest cover. As an overall change between 1984 and 2007, there was a net decrease of 2.30% in total forested areas. On one hand, productive forest areas decreased 12,506 ha, on the other hand, degraded forest areas increased 14,805 ha. In examining the changes of crown closure and development stages of forest ecosystem during the study period, the forest stand area with medium crown closures increased. Regenerated area increased while the other development stages were left to grow to mature development stages in the period. These results regarding to crown closure and development stage showed that forest quality has increased but total forest areas decreased. This is partially due to out-migration of rural population in Rize and Cayeli towns. In terms of spatial configuration, analysis of the metrics revealed that landscape structure in Study area had changed substantially over the 23-year study period, resulting in fragmentation of the landscape as indicated by the large patch numbers and the smaller mean patch sizes due to heavy timber subtraction, illegal cutting, and uncontrolled stand treatments.     

Local stakeholders' acceptance of model-generated data used as a communication tool in water management: The Rönneå Study

The objective of this study was to increase the knowledge of local stakeholders' acceptance of model-generated data when used as a communication tool in water quality management. The R?nne? catchment in the southwest of Sweden was chosen as the study area. The results indicate the model-generated data served as a uniting factor. Simultaneously, the stakeholders were concerned with presented data, the main problems being sources of pollution, which were not accounted for, lack of trustworthiness when measuring pollution, and the uncertainty of the impact of natural variation and delayed effects. Four clusters of factors were identified as influencing stakeholders' acceptance of the model-generated data: confidence in its practical applications, confidence in the people involved in or providing material for the dialog (such as experts, decision-makers, and media), the social characteristics of the participants (such as age and profession), and the way of communicating the data (such as tone of communication, group composition, duration, and geographical scope of the dialog). The perception of the fairness of the practical application of given model-generated data was also an important factor for acceptance.     

A model for radiological consequences of nuclear power plant operational atmospheric releases

A dynamic dose and risk assessment model is developed to estimate radiological consequences of atmospheric emissions from nuclear power plants. Internal exposure via inhalation and ingestion, external exposure from clouds and radioactivity deposited on the ground are included in the model. The model allows to simulate interregional moves of people and multi-location food supply in the computational domain. Any long-range atmospheric dispersion model which yields radionuclide concentrations in air and on the ground at predetermined time intervals can easily be integrated into the model. The software developed is validated against radionuclide concentrations measured in different environmental media and dose values estimated after the Chernobyl accident. Results obtained using the model compare well with dose estimates and activities measured in foodstuffs and feedstuffs.     

Classification and mapping forest sites using geographic information system (GIS): a case study in Artvin Province

The productivity of forest sites has been indirectly determined with solo wood production objective in forest management. Forest site productivity should, however, be determined directly in order to implement ecosystem based multipurpose forest management philosophy. This article tackles the problem in distinguishing and mapping forest sites using both direct method and indirect method in Genya Mountain located in central of Artvin State Forest Enterprise. About 112 sample plots were designed and distributed over the area. In each sample plot, soil samples were collected and the classical timber inventory measurements were taken. According to direct method, Soil Moisture Regime (SMR) method is preferred due to a water deficiency in the study area. Water holding capacity was used as an essential criterion for the classification of the forest site. Forest site classifications were assigned regarding the physiographic factors such as landform, aspect, and slope. Five different forest sites classes; dry, moderate fresh, fresh, humid and hygric were determined. According to direct method, the guiding curve was used to generate anamorphic site index (SI) equations and three site index classes; good (SI=I–II), medium (SI=III) and low (SI=IV–V) were determined. Some important differences between the methods were realized. The forest sites determined with site index estimation method indicate that site index I and II is 505.99 ha, III 1095.79 ha and IV and V 992.95 ha, whereas forest sites determined with direct method related to dry site of 937.58 ha, moderate fresh site of 931.90 ha, fresh site of 1,797.71 ha, humid site of 80.48 ha and hygric site of 356.55 ha. The forest site maps of both methods were created using GIS functions. The forest sites of open and degraded areas should be determined according to direct method.     

Production of Fe2O3 from FeSO4·xH2O formed in galvanizing works

FeSO₄·xH₂O is generated in large amounts in galvanizing workshops. It can be reutilized by conversion to Fe₂O₃. In this study, the recovery of Fe₂O₃ from FeSO₄·xH₂O formed in the galvanizing process has been examined. The experimental work was carried out at various temperatures and times in the oxidizing medium. The reaction temperatures and times were selected as 450, 500, 550, 600, 650, 700, 800 and 900°C, and 15, 30, 45, 60, 90 and 120 minutes, respectively. In order to determine the amount of Fe₂O₃, a titrimetric method was applied. The reaction products were characterized by means of IR and XRD techniques.The extent of conversion is low at temperatures below 650°C. Almost all of the iron (II) sulfate in the original sample was converted to iron(III) oxide at 650°C (120 min), 700°C (90 min), 800°C (60 min) and 900°C (45 min).     

The effects of external costs on the system selection for treatment and disposal of municipal solid wastes: a deterministic case study for a pre-assessment

Journal of Material Cycles and Waste Management - Selecting a system for treatment and disposal of municipal solid wastes (i.e., selection of the capacity, location and type of the processes and...     

Thermal and Environmentally Induced Degradation Behaviors of Amorphous and Semicrystalline PLAs Through Rheological Analysis

Journal of Polymers and the Environment - The degradation behaviors of an amorphous and a semicrystalline PLA (i.e., aPLA and cPLA) with similar molecular weights are compared at elevated...