Gas permeability and tortuosity for packed layers of processed municipal solid wastes and incinerator residue.

To make a proper evaluation of gas component movement inside a landfill site, it is important to investigate the different parameters related to gas flow. In this work gas-filled porosity, intrinsic permeability, tortuosity and equivalent pore radius were determined for various packed wastes, such as incineration ash, shredded bulky waste and shredded incombustible waste. These parameters were measured/inferred for samples packed in a column and exposed to a controlled gas flow. The effect of waste conditions, especially the moisture content, on these parameters was also investigated. The intrinsic permeability of such packed wastes was generally in the order of 10(-10) to 10(-9) m2, except for some ash that was one to two orders lower. The tortuosity of waste layer was greater than that of a particulate material and ranged between 2 and 10. The equivalent pore radius was generally in the order of 10(-4) m, which means that gas diffusion is still ordinary in such packed waste layer. The obtained results will be utilized when simulating gas flow inside a landfill site for biogas extraction or site aeration.     

Projections of industrial water withdrawal under shared socioeconomic pathways and climate mitigation scenarios

We estimated global future industrial water withdrawal (IWW) by considering socioeconomic driving forces, climate mitigation, and technological improvements, and by using the output of the Asia–Pacific Integrated Model/Computable General Equilibrium (AIM/CGE) model. We carried out this estimation in three steps. First, we developed a sector- and region-specific regression model for IWW. The model utilized and analyzed cross-country panel data using historical statistics of IWW for 10 sectors and 42 countries. Second, we estimated historical IWW by applying a regression model. Third, we projected future IWW from the output of AIM/CGE. For future projections, we considered and included multiple socioeconomic assumptions, namely different shared socioeconomic pathways (SSPs) with and without climate mitigation policy. In all of the baseline scenarios, IWW was projected to increase throughout the twenty-first century, but growth through the latter half of the century is likely to be modest mainly due to the effects of decreased water use intensity. The projections for global total IWW ranged from 461 to 1,560 km³/year in 2050 and from 196 to 1,463 km³/year in 2100. The effects of climate mitigation on IWW were both negative and positive, depending on the SSPs. We attributed differences among scenarios to the balance between the choices of carbon capture and storage (CCS) and renewable energy. A smaller share of CCS was accompanied by a larger share of non-thermal renewable energy, which requires a smaller amount of water withdrawal per unit of energy production. Renewable energy is, therefore, less water intensive than thermal power with CCS with regard to decarbonizing the power system.     

Metal distribution in incineration residues of municipal solid waste (MSW) in Japan

This study aimed to identify distribution of metals and the influential factors on metal concentrations in incineration residues. Bottom ash and fly ash were sampled from 19 stoker and seven fluidized bed incinerators, which were selected to have a variety of furnace capacity, furnace temperature, and input waste. In the results, shredded bulky waste in input waste increased the concentration of some metals, such as Cd and Pb, and the effect was confirmed by analysis of shredded bulky waste. During MSW incineration, lithophilic metals such as Fe, Cu, Cr, and Al remained mainly in the bottom ash while Cd volatilized from the furnace and condensed to the fly ash. About two thirds of Pb and Zn was found in the bottom ash despite their high volatility. Finally, based on the results obtained in this study, the amount of metal in incineration residues of MSW was calculated and the loss of metal was estimated in terms of mass and money. A considerable amount of metal was found to be lost as waste material by landfilling of incineration residues.     

Compartment model of aerobic and anaerobic biodegradation in a municipal solid waste landfill

The mathematical formulations in a one-dimensional compartment model of the biodegradation of organic landfill components are described. The model is designed to switch between anaerobic and aerobic conditions, depending on the local oxygen concentration. The model also includes the effect of environmental factors, such as moisture content, pH, and temperature, on reaction rates. The model includes not only biodegradation processes for carbon compounds (acetate, CO2, CH4), but also for nitrogen compounds involved in nitrification and denitrification due to their significance in landfills. Two example runs to simulate anaerobic and aerobic waste were conducted for a single landfill unit cell by changing the organic content and diffusion coefficient.     

Recovery of zinc and lead from fly ash from ash-melting and gasification-melting processes of MSW--comparison and applicability of chemical leaching methods

Fly ash generated from MSW ash-melting and gasification-melting plants, known as Melting Furnace Fly Ash (MFA), contains considerable amounts of heavy metals such as Pb and Zn. These metals can be recovered using a smelting furnace after "pre-treatment" for removal of unnecessary elements such as Cl, Sn and Si. Chemical methods have been studied for pretreatment in the past. However, they have been discussed only with regard to treatment cost and the concentration of Pb and Zn recovered, but neither applicability to various types of MFA nor the environmental impact have been considered. In this study, acid, alkaline and ammonia/chloride leaching methods were compared from the standpoints of: (1) applicability to MFA, (2) concentration of Pb and Zn recovered, (3) treatment cost, and (4) environmental impact. Twenty-three samples of MFAs were collected and classified into 4 types based on element contents. A Pb and Zn recovery experiment was conducted for the representative MFA of those types. The results showed: (1) MFA from gasification-melting plants cannot be treated by chemical methods; (2) the other MFA can be treated to an acceptable quality by existing smelting furnaces; (3) only MFA from electric resistance ash-melting plants can be treated easily by the water washing method; and (4) alkaline and ammonia/chloride leaching methods were more effective than acid leaching.     

Recovery of solid fuel from municipal solid waste by hydrothermal treatment using subcritical water

Hydrothermal treatments using subcritical water (HTSW) such as that at 234 °C and 3 MPa (LT condition) and 295 °C and 8 MPa (HT condition) were investigated to recover solid fuel from municipal solid waste (MSW). Printing paper, dog food (DF), wooden chopsticks, and mixed plastic film and sheets of polyethylene, polypropylene, and polystyrene were prepared as model MSW components, in which polyvinylchloride (PVC) powder and sodium chloride were used to simulate Cl sources.While more than 75% of carbon in paper, DF, and wood was recovered as char under both LT and HT conditions, plastics did not degrade under either LT or HT conditions. The heating value (HV) of obtained char was 13,886-27,544 kJ/kg and was comparable to that of brown coal and lignite. Higher formation of fixed carbon and greater oxygen dissociation during HTSW were thought to improve the HV of char.Cl atoms added as PVC powder and sodium chloride to raw material remained in char after HTSW. However, most Cl originating from PVC was found to converse into soluble Cl compounds during HTSW under the HT condition and could be removed by washing.From these results, the merit of HTSW as a method of recovering solid fuel from MSW is considered to produce char with minimal carbon loss without a drying process prior to HTSW. In addition, Cl originating from PVC decomposes into soluble Cl compound under the HT condition. The combination of HTSW under the HT condition and char washing might improve the quality of char as alternative fuel.     

Global-scale quantitative assessment for biodiversity on forest land use: applying the Global No Net Loss approach

Here we propose a method to quantitatively assess and examine Global No Net Loss (GNNL) of forest biodiversity on a global scale. The method produces a GNNL index of existing forest and enables future predictions of forest loss under different assumptions. The method tests the feasibility of the GNNL index and enables discussion of policy for future global scale sustainable forest management up to 2050. The GNNL index was estimated from an equation including forest areas per country per forest type (primary forest, secondary forest and plantation forest), diversity of forest ecosystem, and species density. Estimates derived from historical data revealed an approximate 7% reduction in GNNL index between 1990 and 2005. Predictions of the GNNL index until 2050 emphasize the importance of regenerating large portions of forests felled for agricultural land (or other uses) with secondary forests.     

Experimental study of behavior of endocrine-disrupting chemicals in leachate treatment process and evaluation of removal efficiency

An experimental study of the behavior of endocrine-disrupting chemicals (EDCs) in leachate treatment processes (aeration, coagulation and sedimentation, activated carbon adsorption, and advanced oxidation) was conducted and removal efficiencies were evaluated. Among target EDCs, concentrations of BPA (1800 times), DBP (10 times), BBP (40 times), and DEHP (30 times) in leachate are more than ten times higher than those in surface water. BPA, DBP, and BBP can be treated by aeration and DEHP, by advanced oxidation processes. BPA could not be effectively removed by coagulation and sedimentation because most of BPA partitioned in the supernatant. DEHP could hardly be treated by aeration. The removal ratios of DEHP were approximately 50–70% if the generated sediment was removed completely. The removal ratios of DEHP in leachate of 100 m³/d with 100 kg of activated carbon were 50–70%, assuming a complete mixing model. The concentration of DEHP was decreased to below one-tenth in 120 min by advanced oxidation processes.     

Temporal pessimism and spatial optimism in environmental assessments: An 18-nation study

The personal assessments of the current and expected future state of the environment by 3232 community respondents in 18 nations were investigated at the local, national, and global spatial levels. These assessments were compared to a ranking of each country's environmental quality by an expert panel. Temporal pessimism (“things will get worse”) was found in the assessments at all three spatial levels. Spatial optimism bias (“things are better here than there”) was found in the assessments of current environmental conditions in 15 of 18 countries, but not in the assessments of the future. All countries except one exhibited temporal pessimism, but significant differences between them were common. Evaluations of current environmental conditions also differed by country. Citizens' assessments of current conditions, and the degree of comparative optimism, were strongly correlated with the expert panel's assessments of national environmental quality. Aside from the value of understanding global trends in environmental assessments, the results have important implications for environmental policy and risk management strategies.     

Characterization of residual carbon influencing on de novo synthesis of PCDD/Fs in MSWI fly ash

Using 19 samples of fly ash collected from various MSW incineration facilities, residual carbon was characterized by gasifiable fraction at 450 degrees C (C450), and the correlations with de novo synthesis of PCDD/Fs were experimentally examined. Fly ashes were classified into three groups by the ratio of C450 to total residual carbon. By comparison of CO and CO2 generation patterns with those of reference materials, unburnt carbon of solid waste and activated carbon powder injected into flue gas were identified as a carbon source in fly ash. In the experiment of de novo synthesis of PCDD/Fs, the content of PCDD/F synthesis depended on C450 regardless of the origin of carbon. In addition, the model to predict the content of PCDD/F synthesis, DeltaPCDD/F=0.989.Cu.C450, fitted well with experimental values.