Interpretation of roadside PM10 monitoring data from Sunderland,United Kingdom

Roadside PM₁₀ has been monitored by Partisol® at three sitesin Sunderland between August 1997 and February 1998. The sites chosen were an inner city kerbside site; a roadside site adjacentto a dual carriageway on the outskirts of Sunderland with an openaspect; and a rural site.The results indicate that there is a seasonal variation in the relationship between the sites in terms of monitored PM₁₀.In the winter there is a poor correlation between the sites whereas in the summer significant correlations are obtained. Of the sites monitored PM₁₀ is consistently highest at the inner city roadside site. During the summer, exceedances of theU.K. 50 g m^-3 standard (DETR, 2000) are associated with conditions suitable for the build-up of photochemical pollutionhowever during the winter period exceedances are recorded duringa variety of weather conditions.At the dual carriageway site PM_2.5 has also been recorded and contributions to measured PM₁₀ are 77% in summer and68% in winter. The results illustrate a number of inconsistencies between this study utilising the Partisol® andothers reporting results where PM₁₀ has been monitored by TEOM®.     

Global scale emission and distribution of sea-spray aerosol: Sea-salt and organic enrichment

The chemical composition of marine aerosols as a function of their size is an important parameter for the evaluation of their impact on the global climate system. In this work we model fine particle organic matter emitted by sea spray processes and its influence on the aerosol chemical properties at the global scale using the off-line global Chemistry-Transport Model TM5. TM5 is coupled to a microphysical aerosol dynamics model providing size resolved information on particle masses and numbers. The mass of the emitted sea spray particles is partitioned between water insoluble organic matter (WIOM) and sea salt components in the accumulation mode using a function that relates the emitted organic fraction to the surface ocean chlorophyll-a concentrations. The global emission in the sub-micron size range of organic matter by sea spray process is 8.2 Tg yr^?1, compared to 24 Tg fine yr^?1 sea-salt emissions. When the marine sources are included, the concentrations of modelled primary particulate organic matter (POM) increase mainly over the oceans. The model predictions of WIOM and sea salt are evaluated against measurements carried out at Mace Head (Northern Hemisphere) and Amsterdam Island (Southern Hemisphere), showing that in clean marine conditions WIOM marine emissions contribute significantly to POM values.     

Invasional meltdown: invader-invader mutualism facilitates a secondary invasion

In multiply invaded ecosystems, introduced species should interact with each other as well as with native species. Invader-invader interactions may affect the success of further invaders by altering attributes of recipient communities and propagule pressure. The invasional meltdown hypothesis (IMH) posits that positive interactions among invaders initiate positive population-level feedback that intensifies impacts and promotes secondary invasions. IMH remains controversial: few studies show feedback between invaders that amplifies their effects, and none yet demonstrate facilitation of entry and spread of secondary invaders. Our results show that supercolonies of an alien ant, promoted by mutualism with introduced honeydew-secreting scale insects, permitted invasion by an exotic land snail on Christmas Island, Indian Ocean. Modeling of land snail spread over 750 sites across 135 km2 over seven years showed that the probability of land snail invasion was facilitated 253-fold in ant supercolonies but impeded in intact forest where predaceous native land crabs remained abundant. Land snail occurrence at neighboring sites, a measure of propagule pressure, also promoted land snail spread. Site comparisons and experiments revealed that ant supercolonies, by killing land crabs but not land snails, disrupted biotic resistance and provided enemy-free space. Predation pressure on land snails was lower (28.6%), survival 115 times longer, and abundance 20-fold greater in supercolonies than in intact forest. Whole-ecosystem suppression of supercolonies reversed the probability of land snail invasion by allowing recolonization of land crabs; land snails were much less likely (0.79%) to invade sites where supercolonies were suppressed than where they remained intact. Our results provide strong empirical evidence for IMH by demonstrating that mutualism between invaders reconfigures key interactions in the recipient community. This facilitates entry of secondary invaders and elevates propagule pressure, propagating their spread at the whole-ecosystem level. We show that identification and management of key facilitative interactions in invaded ecosystems can be used to reverse impacts and restore resistance to further invasions.     

Mercury Measurement and Its Control: What We Know,Have Learned,and Need to Further Investigate

ABSTRACT

Based on the available evidence of health effects, the U.S. Environmental Protection Agency (EPA) has been evaluating the need to regulate mercury releases to the environment. In response to the congressional mandates in The 1990 Clean Air Act Amendments (CAAA), the EPA has issued the Mercury Study Report and the Study of Hazardous Air Pollutant Emissions from Electric Utility Steam Generating Units Report. In spite of the enormous effort represented by these reports, as well as the efforts of both the U.S. Department of Energy (DOE) and the Electric Power Research Institute (EPRI), in conducting the field measurement programs that form the basis for these reports, a definitive answer on the need for mercury regulation has not been found. However, the EPA, as well as other regulatory agencies and health researchers, have suggested a “plausible link” between anthropogenic sources emitting mercury and the methylation, bioaccumulation in the food chain, and adverse health effects in humans and wildlife.

Policy-makers have recognized that regulations must be based on good science and that a number of issues still remain. These issues can generally be grouped into four main categories: emissions inventory, control technology, fate of releases, and health effects. This paper will discuss recent, ongoing, and planned studies to address the remaining issues regarding the presence of mercury in the environment, with an emphasis on those studies that are directly related to the DOE/Federal Energy Technology Center’s (FETC) programmatic effort.     

Modeling sorbent injection for mercury control in baghouse filters: I--model development and sensitivity analysis

A two-stage mathematical model for Hg removal using powdered activated carbon injection upstream of a baghouse filter was developed, with the first stage accounting for removal in the ductwork and the second stage accounting for additional removal caused by the retention of carbon particles on the filter. The model shows that removal in the ductwork is minimal, and the additional carbon detention time from the entrapment of the carbon particles in the fabric filter enhances the Hg removal from the gas phase. A sensitivity analysis on the model shows that Hg removal is dependent on the isotherm parameters, the carbon pore radius and tortuosity, the C/Hg ratio, and the carbon particle radius.     

Mercury Measurement and Its Control: What We Know,Have Learned,and Need to Further Investigate

ABSTRACT

Based on the available evidence of health effects, the U.S. Environmental Protection Agency (EPA) has been evaluating the need to regulate mercury releases to the environment. In response to the congressional mandates in The 1990 Clean Air Act Amendments (CAAA), the EPA has issued the Mercury Study Report and the Study of Hazardous Air Pollutant Emissions from Electric Utility Steam Generating Units Report. In spite of the enormous effort represented by these reports, as well as the efforts of both the U.S. Department of Energy (DOE) and the Electric Power Research Institute (EPRI), in conducting the field measurement programs that form the basis for these reports, a definitive answer on the need for mercury regulation has not been found. However, the EPA, as well as other regulatory agencies and health researchers, have suggested a "plausible link" between anthropogenic sources emitting mercury and the methylation, bioaccumulation in the food chain, and adverse health effects in humans and wildlife.     

The thief process for mercury removal from flue gas

The Thief Process is a cost-effective variation to activated carbon injection (ACI) for removal of mercury from flue gas. In this scheme, partially combusted coal from the furnace of a pulverized coal power generation plant is extracted by a lance and then re-injected into the ductwork downstream of the air preheater. Recent results on a 500-lb/h pilot-scale combustion facility show similar removals of mercury for both the Thief Process and ACI. The tests conducted to date at laboratory, bench, and pilot-scales demonstrate that the Thief sorbents exhibit capacities for mercury from flue gas streams that are comparable to those exhibited by commercially available activated carbons. A patent for the process was issued in February 2003. The Thief sorbents are cheaper than commercially-available activated carbons; exhibit excellent capacities for mercury; and the overall process holds great potential for reducing the cost of mercury removal from flue gas. The Thief Process was licensed to Mobotec USA, Inc. in May of 2005.     

A Strategy for the Evaluation of Sensory and Pulmonary Irritation Due to Chemical Emissions from Indoor Sources

Abstract

Sensory and pulmonary irritation are physiological responses to chemical exposure which result in characteristic, measurable changes in respiratory activity in mice. A standard method has been applied to the estimation of sensory irritation associated with a specific chemical exposure. This method has been correlated with human responses to these chemicals. Symptoms associated with chemical irritants are consistent with complaints due to problems with indoor air quality, which may include eye and upper respiratory tract irritation, headaches, and nausea. A stepwise strategy for assessing the contribution of indoor products to sensory and pulmonary irritation is discussed in the current paper. The strategy includes product emissions testing using dynamic environmental chambers, the selection of suspected irritants for respiratory irritation testing, respiratory irritation testing of individual compounds and representative mixtures using synthesized atmospheres, and the evaluation of test data to determine those compounds which may contribute to sensory and pulmonary irritation in humans. The current strategy is being applied to evaluate carpet system materials and their constituent chemicals.     

Volcanic sulphate and arctic dust plumes over the North Atlantic Ocean

High time resolution aerosol mass spectrometry measurements were conducted during a field campaign at Mace Head Research Station, Ireland, in June 2007. Observations on one particular day of the campaign clearly indicated advection of aerosol from volcanoes and desert plains in Iceland which could be traced with NOAA Hysplit air mass back trajectories and satellite images. In conjunction with this event, elevated levels of sulphate and light absorbing particles were encountered at Mace Head. While sulphate concentration was continuously increasing, nitrate levels remained low indicating no significant contribution from anthropogenic pollutants. Sulphate concentration increased about 3.8 μg m⁻³ in comparison with the background conditions. Corresponding sulphur flux from volcanic emissions was estimated to about 0.3 TgS yr⁻¹, suggesting that a large amount of sulphur released from Icelandic volcanoes may be distributed over distances larger than 1000 km. Overall, our results corroborate that transport of volcanogenic sulphate and dust particles can significantly change the chemical composition, size distribution, and optical properties of aerosol over the North Atlantic Ocean and should be considered accordingly by regional climate models.     

Modeling sorbent injection for mercury control in baghouse filters: II--pilot-scale studies and model evaluation

Activated carbon injection for Hg control in a 500-lb/hr pilot-scale coal-fired furnace equipped with a fabric filter for particulate control was evaluated at different operating conditions. The pilot-scale tests showed that Hg removal was improved at lower temperatures and higher C/Hg ratios. The two-stage mathematical model developed to describe Hg removal using powdered activated carbon injection upstream of a baghouse filter was used to obtain Langmuir isotherm parameters as a function of temperature by fitting the model to a subset of experimental data. The predictive capability of the model was then tested by comparing model calculations with additional experimental data from this system obtained using different operating temperatures and sorbent to Hg ratios. Model predictions were in good agreement with experimentally measured Hg removal efficiency. Based on the model predictions, Hg removal in the duct appears to be limited and higher C/Hg ratio, lower operating temperature, and longer cleaning cycle of the baghouse filter should be utilized to achieve higher Hg removal in this system.