Effectiveness of resistivity monitoring for interpreting temporal changes in landfill properties

It is always possible for impermeable layers to exist in landfills. When they do, the properties of the solution at the exit of the leachate-collection system might not accurately reflect the overall properties of the landfill. This study examines whether resistivity monitoring is effective for determining the influence of impermeable layers on the leachate. The test cell used in this study was filled with waste made up mainly of incinerator ash and shredded incombustible material. Three lines of resistivity sensors were laid in the uppermost layer of the fill. A resistivity profile was recorded periodically from each of these lines. The water-table level and leachate properties were measured concurrently. Leachate conductivity was mainly controlled by concentrations of the main ions, and it correlated inversely to variations in resistivity. Temporal changes in the resistivity of the fills are an excellent means of assessing the leaching in fills. Monitoring the properties of leachate, combined with resistivity profiling, is extremely useful for interpreting the temporal changes of properties in landfills containing impermeable layers.     

Supercritical water gasification of sewage sludge using bench-scale batch reactor: advantages and drawbacks

Sewage sludge, a byproduct of municipal wastewater treatment, was gasified by supercritical water using a bench-scale batch reactor. Configuration of bench-scale batch reactor and operation procedures are discussed in detail. Experience and challenges that arose during the experiment are also shared. Using the bench-scale reactor under the condition of 600 °C, 23 MPa, and a reaction time of 60 min without catalyst presence, a total gas yield of 9.8 mol/(kg-sewage sludge) was obtained. Furthermore, investigations on operational parameters were conducted. Extension of reaction time up to 60 min increased the gasification, reaching a plateau thereafter. Investigation on pressure indicated the superiority of supercritical pressure. The addition of Ni as a catalyst also promoted gasification, although inorganic salts and char seemed to cover the catalyst surface. With regard to the prospect of future operation at a municipal waste water treatment plant, the effect of operational parameters on heavy metal concentration in the liquid phase is also discussed.     

Influence of oxygen flow rate on reaction rate of organic matter in leachate from aerated waste layer containing mainly incineration ash

It is known that aeration reduces rapidly the concentration of organic matter in leachate. However, the oxygen flow rate required to attain a certain reaction rate of organic matter should be carefully estimated. In this study, using the oxygen ratio (the ratio of oxygen flow rate by aeration to oxygen consumption rate of waste layer) as a parameter, the reaction rate of organic matter in leachate from landfilled incineration ash and incombustible waste upon aeration was evaluated. Total organic carbon (TOC) in the leachate was reduced rapidly when the oxygen ratio was high. The decomposition rate exceeded the elution rate of TOC in the leachate from the waste layer for several days when the oxygen ratio was above 10². The results indicate that the oxygen ratio can be used as a parameter for the aeration operation in actual landfill sites, to rapidly stabilize organic matter in leachate.     

Finite element analysis of knee injury risks in car-to-pedestrian impacts

In vehicle-pedestrian collisions, lower extremities of pedestrians are frequently injured by vehicle front structures. In this study, a finite element (FE) model of THUMS (total human model for safety) was modified in order to assess injuries to a pedestrian lower extremity. Dynamic impact responses of the knee joint of the FE model were validated on the basis of data from the literature. Since in real-world accidents, the vehicle bumper can impact the lower extremities in various situations, the relations between lower extremity injury risk and impact conditions, such as between impact location, angle, and impactor stiffness, were analyzed. The FE simulation demonstrated that the motion of the lower extremity may be classified into a contact effect of the impactor and an inertia effect from a thigh or leg. In the contact phase, the stress of the bone is high in the area contacted by the impactor, which can cause fracture. Thus, in this phase the impactor stiffness affects the fracture risk of bone. In the inertia phase, the behavior of the lower extremity depends on the impact locations and angles, and the knee ligament forces become high according to the lower extremity behavior. The force of the collateral ligament is high compared with other knee ligaments, due to knee valgus motions in vehicle-pedestrian collisions.     

The redox combustion of carbon monoxide for recovering pure carbon dioxide by using molten (Na+,K+)2(CO32-,SO42-) mixtures

Large-scale combustion systems, such as thermal power plants, emit large amounts of carbon dioxide, which can increase global warming. A molten salt redox combustion system was proposed to recover pure carbon dioxide exhausted from the combustion of fossil fuels. This system is composed of two successive processes by using reactions occurring in a molten salt. The molten salt is the mixture of the molten alkali metal sulfates and carbonates. The sulfate ions oxidize the fuels in first processes, being changed to reductive species such as sulfide ions. In this process, carbon dioxide and water are exclusively exhausted. The reductive species of sulfur compounds are oxidized to regenerate the sulfate ions by air in the second process. In this study, these above two processes were tried by using molten [(Na(+))(0.5),(K(+))(0.5)](2)[(CO(3)(2-))(0.9),(SO(4)(2-))(0.1)] alternatively. The oxidation of carbon monoxide as fuel by sulfate ions and the regeneration of sulfate ions by air were investigated in the temperature range of 700-950 degrees C, respectively. These reactions were exothermic. The rate of the regeneration of the sulfate ions was extremely high. During the oxidation of carbon monoxide, the reaction was first order in carbon monoxide with an activation energy of 101 kJ mol(-1). The optimum condition to recover pure carbon dioxide on practical operation was discussed.     

土壤和沉积物中痕量元素的ICP质谱法测定

人们对环境中污染物 (特别是重金属 )的“安全”水平的关注与日俱增 ,要分析的元素更多 ,浓度更低 ,从而暴露出当前所用分析技术的局限性 ,需要进一步提高分析方法的灵敏度和可分析的元素数量 .尽管ＧＦＡＡＳ (石墨炉原子吸收光谱 )和ＩＣＰ ＯＥＳ (感耦等离子体发射光谱 )仍是环境元素分析中最常用的技术 ,但ＩＣＰ ＭＳ (等离子体质谱 )是具有更高灵敏度的分析技术 ,不久肯定会被普遍接受 .ＨＰ 4 50 0台式ＩＣＰ质谱仪具有实际惯常分析应用所必需的可靠性和易于操作 ,可进行亚ｎｇ·ｍｌ- 1级 (ｐｐｂ)浓度水平的多元素快速分析 .本篇…     

Decomposition of poly(amide-imide) film enameled on solid copper wire using atmospheric pressure non-equilibrium plasma

The decomposition of a poly(amide-imide) thin film coated on a solid copper wire was attempted using atmospheric pressure non-equilibrium plasma. The plasma was produced by applying microwave power to an electrically conductive material in a gas mixture of argon, oxygen, and hydrogen. The poly(amide-imide) thin film was easily decomposed by argon-oxygen mixed gas plasma and an oxidized copper surface was obtained. The reduction of the oxidized surface with argon-hydrogen mixed gas plasma rapidly yielded a metallic copper surface. A continuous plasma heat-treatment process using a combination of both the argon-oxygen plasma and argon-hydrogen plasma was found to be suitable for the decomposition of the poly(amide-imide) thin film coated on the solid copper wire.     

二价铜离子与抗坏血酸共存下的杀菌效果及其机理

考察了二价铜离子与抗坏血酸的组合对大肠杆菌的杀菌效果。实验证明:高浓度的铜离子与抗坏血酸的组合有非常好的杀菌效果,不论是酸性还是中性条件下都能在0.5 h杀灭所有的大肠杆菌;低浓度的铜离子与抗坏血酸的组合也有不错的杀菌效果,且随着pH值的升高,杀菌效果增强,pH=4的条件下24 h后杀灭大肠杆菌,pH=7的条件下0.5 h便能杀灭所有杆菌。实验运用ESR检测羟基自由基,并结合杀菌实验结果推断二价铜离子与抗坏血酸反生了类Fenton反应。     

土壤酸化及天然土壤溶液中铝的形态

采用真空式土壤溶液采样器收集了宜昌、巫山松树林中天然土壤溶液,采用高效液相色谱法Al－Lumogallion柱后荧光检测,分析测试了土壤溶液中可溶性铝的形态,研究了由于土壤酸化引起天然土壤溶液中不同形态铝的迁移转化结果表明,天然土壤溶液中含有不同形态的铝,主要是有机铝、 AISO₄⁺、AIF₂⁺、Al（OH）²⁺、Al³⁺等．宜昌、巫山地区土壤溶液中活性铝（Al³⁺、AlOH^2+F）的含量比较低．土壤的酸化使得天然土壤溶液中总铝含量增加、铝形态的优势态发生变化,即土壤的酸化使得天然土壤溶液中活性铝－Al³⁺、AlOHF²⁺含量和比例增加．土壤酸化还降低了大然土壤溶液中的BC/Al比值,这些变化的结果都增加了对森林潜在的危害．