Correlation between lead levels in drinking water and mothers’ breast milk: Dakahlia, Egypt

This study was performed on fifty-two drinking tap water samples (surface and groundwater) collected from different districts of Dakahlia Governorate and fifty-two breast milk samples from lactating mothers hosted in Dakahlia Governorate hospitals. All these samples were subjected to lead analysis. Lead level in drinking groundwater showed higher levels than in drinking surface water. Also, an elevation of lead levels in breast milk of mothers drinking groundwater was noticed when compared with that of mothers drinking surface water. The comparison between mean lead levels in drinking water and mothers’ breast milk samples showed positive relationship. Lead concentrations in breast milk of the studied samples were elevated by exposure to smoking. We conclude that prolonged contact with lead plumbing can increase the lead content in tap water with subsequent increase in lead burden in infant fed formula and infant blood. Also, we recommend that chemical analyses must be carried out periodically for the surface and groundwater to ensure the water suitability for drinking purposes. Passive exposure to smoking during lactation should be avoided. Capsule: Prolonged contact with lead plumbing can increase the lead content in tap water with subsequent increase in lead burden in infant fed formula and infant blood.     

Potential utilization of burned wood in manufacture of medium density fiberboard

The potential utilization of burned wood in the manufacture of medium density fiberboard (MDF) was investigated. For this aim, the MDF panels were made of various mixtures of burned pine wood (Pinus sylvestris L.), unburned beech (Fagus orientalis L.) and oak (Ouercus robur L.) woods under commercial conditions in an MDF company. The mixture ratio of the unburned beech and oak woods to the burned pine wood were 50/50 wt%. The mixing ratios of burned wood chips with unburned wood chips were 0:100, 25:75, 50:50, 75:25 and 100:0, %, respectively. A commercial urea–formaldehyde resin was used as a binder. The physical properties measured in the investigation included density and thickness swelling, while the mechanical properties examined were bending strength, modulus elasticity, internal bond, screw holding ability perpendicular to the plane of panel, and janka hardness perpendicular to the plane of the panel. Surface roughness and color of the panels were also measured. The results indicated that all the panels met the mechanical properties of general-purpose MDF requirements of EN 622-5. The surface roughness of the MDF panels containing burned wood decreased with increasing burned wood content but remained higher than the control panels. The dimensional stability of the MDF panels decreased with the incorporation of burned wood fibers as compared with the control MDF panels.     

Synthesis of 2,5‐diaryl‐2,4‐pentadienenitriles and their spectral,fluorescence and mutagenic properties

The condensation of substituted cinnamaldehydes and arylacetonitriles using sodium ethoxide in ethanol at room temperature afforded 2,5‐diaryl‐2,4‐pentadienenitriles in good yield. The structure of the reaction products was established on the basis of their infrared, nuclear magnetic resonance and elemental analysis data. Two representative compounds were studied for their mutagenic activity. One of them showed a weak mutagenicity while the second showed a high mutagenic activity in TA97a Salmonella strain. Both were negative in TA100. Some of these pentadienenitriles showed fluorescence in solutions.     

Properties of Biocomposite Films From PLA and Thermally Treated Wood Modified with Silver Nanoparticles Using Leaf Extracts of Oriental Sweetgum

Journal of Polymers and the Environment - The technological, thermal, and antimicrobial properties of biocomposite films produced from polylactic acid (PLA) and thermally treated wood flour with in...     

The ameliorative effect of kaempferol against CdCl2- mediated renal damage entails activation of Nrf2 and inhibition of NF-kB

Environmental Science and Pollution Research - This study evaluated the nephroprotective effect of kaempferol against cadmium chloride (CdCl2) -induced nephropathy in rats. It also investigated if...     

Testing the performance of European diatom indices for evaluating the ecological status in the Kızılırmak basin,Turkey: flowing waters

Environmental Science and Pollution Research - The K?z?l?rmak River is the longest river (1.355 km) in Turkey and flows into the Black Sea. Main pressures in the basin are waste...     

Pyrolysis of commingled waste textile fibers in a batch reactor: Analysis of the pyrolysis gases and solid product

The main object of this study was the investigation of the thermal recycling of commingled waste textile fibers, with the aim of the production of useful end products. Differential scanning calorimetry/Thermo gravimetric analysis (DSC/TGA) was applied to determine the thermal degradation characteristics of the commingled waste textile fibers and there are two peaks located at the temperature ranges of 299–360°C and 399–500°C. Commingled waste fiber was pyrolyzed in a nitrogen atmosphere in relation to three different temperatures (500, 600, and 700°C), heating rates (25 and 50°C min^?1), and retention times (15 and 30 min). The effect of the experimental conditions such as pyrolysis temperature, heating rates, and retention time on the formation of char and gas--liquid products was investigated and the product yields were determined from the rate of the weight loss. The highest conversion rate 82.9 wt.% liquid--gas product and 17.1 wt.% char product was achieved at 700°C. Pyrolysis gases were taken for every 7, 15, and 25 min and were analyzed for major components such as CO, CO₂, CH₄, and H₂ by gas chromatography. The pyrolysis char called as carbon black derived from the pyrolysis of commingled waste textile fibers was analyzed for a range of properties, including the elemental analysis, moisture content, ash content, calorific value, and trace metal analysis.     

Prenatal diagnosis of Milroy's primary congenital lymphedema

Milroy's primary congenital lymphedema (PCL) (hereditary lymphedema type I, Milroy disease) is present at birth, and mostly affects the dorsal aspects of feet. It is mostly a life-long condition but does not affect longevity. Complications are rare except for chronic discomfort and warmness of affected areas. PCL is an autosomal dominant disease with incomplete penetrance due to a mutation in the gene locus encoding for VEGFR3 with resultant dysgenesis of microlymphatic vessels. We report on two fetuses where ultrasonographic examination at 15 weeks of gestation showed significant edema of the dorsal aspects of both feet with no evidence of other major malformations. Whereas in one fetus the edema resolved completely, it persisted in the second fetus and proved after birth to be of lymphedematous nature. To the best of our knowledge, this is the first report of early prenatal diagnosis of primary congenital lymphedema via fetal ultrasonographic examination and of spontaneous resolution of lymphedema during fetal life. Copyright © 2002 John Wiley & Sons, Ltd.     

Anaerobic digestion for waste water poultry manure by UBF reactor

ＡｎａｅｒｏｂｉｃｄｉｇｅｓｔｉｏｎｆｏｒｗａｓｔｅｗａｔｅｒｐｏｕｌｔｒｙｍａｎｕｒｅｂｙＵＢＦｒｅａｃｔｏｒＧｈａｎｅｍＩ．Ｉ．ＩｂｒａｈｉｍＡｇｒｉｃｕｌｔｕｒａｌＥｎｇｉｎｅｅｒｉｎｇＲｅｓｅａｒｃｈＩｎｓｔｉｔｕｔｅ，Ａｇｒｉｃｕｌｔｕｒ...     

Utilization of Sunflower Stalk in Manufacture of Thermoplastic Composite

Dimensional stability and mechanical performance of polypropylene thermoplastic composites filled with sunflower stalk (SS) flour at 30, 40, 50, and 60 wt% contents of the SS flour were investigated. The thickness swelling and water absorption of the specimens increased with increasing SS flour content. The modulus in the flexural and tensile improved with increasing SS flour content while the tensile and flexural strengths of the specimens decreased. The use of maleic anhydride polypropylene (3 wt%) had a positive effect on the dimensional stability and mechanical properties of the polypropylene thermoplastic composites filled with SS flour. The melting temperature of polypropylene decreased with increasing content of the SS flour. The degree of crystallinity of filled polypropylene composites between fibre loading of 0–30 % by weight was higher than that of unfilled polypropylene composites. However, further increment in the filler content decreased the degree of crystallinity. The obtained results showed that SS flour could be potentially suitable raw material in the manufacture of polypropylene composites.