Lithium extraction from salt lake brines with high magnesium/lithium ratio: a review

Environmental Chemistry Letters - The demand for lithium is growing rapidly with the increase in electric vehicles, batteries and electronic equipments. Lithium can be extracted from brines, yet...     

A combined radical and non-radical oxidation processes for efficient degradation of Acid Orange 7 in the homogeneous Cu(II)/PMS system: important role of chloride

Environmental Science and Pollution Research - Trace copper ion (Cu(II)) in water and wastewater can trigger peroxymonosulfate (PMS) activation to oxidize organic compounds, but it only works under...     

Approach to the management of magnesium slag via the production of Portland cement clinker

Journal of Material Cycles and Waste Management - This work aims to develop another approach to the management of magnesium slag (MS) via the production of Portland cement clinker. Thus, 0, 10, 20,...     

Combined toxicity of imidacloprid,acetochlor, and tebuconazole to zebrafish ( Danio rerio ): acute toxicity and hepatotoxicity assessment

Compound pollution refers to two or more kinds of pollutants with different properties, a pollutant from different sources, or the simultaneous existence of two or more different types of pollutants in the same environment. In this study, we aimed to investigate the individual and combined toxicity of the insecticide imidacloprid (IMI), the herbicide acetochlor (ACT), and the fungicide tebuconazole (TBZ) to zebrafish. The acute toxicity test results showed that the 96-h LC50 values of IMI, ACT, and TBZ were 276.84 (259.62–294.35) mg active ingredient (a.i.) L−1, 1.52 (1.34–1.74) mg a.i. L−1, and 8.16 (7.7–8.6) mg a.i. L−1, respectively. The combinations of IMI, ACT, and TBZ with toxicity ratios of 1:2:2, 1:4:4, 2:4:1, and 4:1:4 displayed synergistic toxic effects on zebrafish, while the toxicity ratios of 1:1:1, 1:1:2, 2:1:2, 2:2:1, and 4:2:1 of IMI, ACT, and TBZ, respectively, exhibited antagonistic toxic effects on zebrafish. The following experiments were performed with a toxicity ratio of 1:4:4 (IMI:ACT:TBZ). The activities of four enzyme biomarkers related to oxidative stress in the liver, catalase (CAT), superoxide dismutase (SOD), glutathione S-transferase (GST), and malondialdehyde (MDA) content were evaluated in each exposure group on days 7, 14, 21, and 28. Compared with those of the control group, the activities of CAT, SOD, and GST and the MDA content were significantly altered at different time points in the individual and combined exposure groups. Additionally, the activities of CAT, SOD, and GST and the MDA content were significantly altered in the combined group compared with those of the individual group after 14 days or 21 days of exposure. Therefore, it was confirmed that combined toxicity studies are indispensable in risk assessment.     

Comparison on surface properties and desulfurization of MnO2 and pyrolusite blended activated carbon by steam activation

In this study, MnO₂ and pyrolusite were used as the catalysts to prepare modified activated carbon, that is, AC-Mn and AC-P, respectively, from coals by blending method and steam activation. The Brunauer–Emmett–Teller (BET) results indicated that the AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The relative contents of basic functional groups (i.e., C = O, π-π*) on AC-P were slightly lower than those on AC-Mn, while both contained the same main metal species, namely, MnO. The desulfurization results showed that with 3 wt% of blending ratio, AC-Mn3 and AC-P3 had higher sulfur capacities at 220 and 205 mg/g, respectively, which were much higher than for the blank one (149.6 mg/g). Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn, which might be attributed to the existence of other metals in pyrolusite. After the desulfurization process, MnO were gradually transferred into MnSO₄, and the relative contents of basic functional groups decreased evidently for both AC-Mn3 and AC-P3. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurization.

Implications: MnO₂ and pyrolusite were used as the additives to prepare modified activated carbon from coals by a blending method and by steam activation, that is, AC-Mn and AC-P, respectively. The AC-P had higher surface areas and micropore volumes than the AC-Mn with the same blending ratio. The AC-Mn and AC-P had higher sulfur capacities than a blank one. Moreover, the AC-P had relatively higher sulfur capacity than the AC-Mn with the same contents of Mn. The results demonstrated that pyrolusite could be one good alternative to MnO₂ to prepare modified activated carbon for desulfurizatio.     

Studies on polycyclic aromatic hydrocarbons in two sediment cores from the huaxi reservoir,china: Assessment of levels,sources, and ecological risk

This study investigated the levels, sources and ecological risks of 16 polycyclic aromatic hydrocarbons (PAHs) in two sediment cores that were collected along the Huaxi Reservoir. The spatial distributions and residue levels of the 16 priority PAHs in the sediments from the Huaxi Reservoir were analyzed for their potential ecological risk, source apportionment and contribution to the total PAH residue. The concentration level of the total PAHs (TPAHs) was in the range 1805 ng·g^?1 to 20023 ng·g^?1 based on dry weight, and the content of PAHs in the Huaxi Reservoir exhibited a gradual upward trend. The PAH congener ratios fluoranthene/(fluoranthene + pyrene) and indeno[1, 2, 3-cd]pyrene/(indeno[1, 2, 3-cd]pyrene + benzo[g, h, i]perylene) were used to identify the source. The main source of the low molecular weight PAHs was wood and coal combustion, whereas the high molecular weight PAHs were primarily from petroleum combustion sources. The results of an ecological risk assessment demonstrated that ACE poses a potential ecological risk, while FLU, NAP, ANT, BaP, DBA, PHEN and PYR can have serious ecological risks.     

废旧硬质聚氨酯泡沫塑料的木质素改性及再生

采用含有二乙二醇(DEG)和乙醇胺(ETA)的双组分解交联剂降解废旧硬质聚氨酯泡沫塑料(PU硬泡),并利用降解得到的低聚物多元醇与木质素复合制备出性能增强的再生PU硬泡。通过对制备的再生PU硬泡的红外光谱、密度、吸水率、抗压强度、热稳定性、导热系数、热重曲线等进行分析测试,考察m(DEG)∶m(ETA)对再生PU硬泡性能的影响。实验结果表明:m(DEG)∶m(ETA)=1∶3时废旧PU硬泡的降解效果最好;木质素加入量为2.0%(w)时再生PU硬泡的密度低、抗压强度高、保温性能良好,达到国家标准《建筑绝热用硬质聚氨酯泡沫塑料》(GB/T 21558—2008)的品质要求。     

Effects of rare earth elements on the distribution of mineral elements and heavy metals in horseradish

In order to investigate the effects of rare earth elements (REEs) on horseradish, the distribution of the mineral elements and heavy metals in different organs of horseradish have been studied by using inductively coupled plasma-atomic emission spectrometry (ICP-AES). Meanwhile, three variable major parameters, namely the concentration of REEs, the type of REEs, and the growth stage of plant were chosen. The results indicated that the test REEs, Ce(III) and Tb(III), could be accumulated in leaves, stems and roots of horseradish. In addition, we found that the content of mineral elements was increased in horseradish treated with 20mgl(-1) of Ce(III), but not those with the 20mgl(-1) of Tb(III). Moreover, the content of mineral elements in horseradish was decreased with the increasing concentration of REEs (100, 300mgl(-1)). Furthermore, we found that there were the opposite effects on the content of the heavy metals in horseradish treated with REEs. Finally, we found that the effect of REEs on the accumulation of REEs, and the content of mineral elements or heavy metals of horseradish during vigorous growth stage, no matter positive or negative, was more obvious than that of the other growth stages. These results demonstrated that the distribution behaviors of mineral elements and heavy metals in horseradish can be affected by the type and concentration of REEs, and the growth period of plant.     

计算机模拟研究UO2+2在人体细胞液的形态分布

建立了由多种金属离子和小分子配体组成的多相细胞液热力学平衡模型.模拟研究了UO2 2在组织液和细胞液的形态分布及CO2-3、氨三乙酸（NTA）和乙二胺四乙酸（EDTA）浓度对细胞液中UO2 2形态分布的影响.在组织液中,正常生理pH下,当各形态UO2 2总摩尔浓度 [U]= 1.0×10-6 mol/L 或[U]=1.0×10-3 mol/L时,UO2 2均主要以[UO2(CO3)3]4-和[UO2(CO3)2]2-形态存在.在细胞液中,当[U]=1.0×10-6 mol/L时,UO2 2主要以[UO2(CO3)3]4-和[UO2(CO3)2]2-存在；当[U]=1.0×10-3 mol/L,pH为6.0～6.8时,细胞液中存在大量的固相(UO2)3(PO4)2·4H2O,当pH为6.8～7.4时,UO2 2主要以[UO2(CO3)3]4-、[UO2(CO3)2]2-和[(UO2)2CO3(OH)3]-存在.细胞液中(UO2)3(PO4)2·4H2O含量随[U]升高而增加.通过调节细胞液pH和增加细胞液CO2-3浓度均能降低其固相UO2 2配合物含量.在细胞液中增加NTA会增加(UO2)3(PO4)2·4H2O含量,当添加EDTA时会显著降低(UO2)3(PO4)2·4H2O含量.     

生态足迹影响因子的定量分析

人口的膨胀和人类工业化进程的加剧，使得人类向自然界获取越来越多的资源，同时向环境源源不断的输入废弃物，已经严重超过了自然生态系统的供给能力和环境容量，生态环境日益恶化，水土流失、草场退化、植被消亡、生物多样性锐减、全球变暖等情况已经严重到难以遏制的地步，危及到人类自身的生存。在和平与发展成为世界两大主题的今天，人们越来越关注可持续发展的问题。在现有资料的基础上，利用主成分分析方法，定量地讨论了中国各省（区市）1999年生态足迹大小与其影响因子间的关系。结果表明，生态足迹的大小是各省（区市）的大中型企业个数、全社会固定生产投资等众多因子共同作用的结果，其中总人口和GDP是生态足迹大小的主要影响因子，其因子载荷量分别达到了0.940和0.913。值得一提的是非农业人口与生态足迹的相关系数超过了农业人口，这说明由于消费模式和生活水平等的差异，非农业人口对生态足迹的影响大于农业人口对生态足迹的影响。在此基础上建立了生态足迹影响因子的多元线性回归模型，以期为生态足迹在进行区域可持续发展评价的方法上提供新的思路。