Strong correlations between metal in mollusk soft tissue and nonresistant sediment fraction: a tool for biomonitoring intertidal zone of the Persian Gulf,Iran

Cadmium (Cd) and lead (Pb) were determined in three species of mollusks and associated sediment. Samples were collected from two locations along the intertidal zone of the Persian Gulf near Bandar Abbas. The study was conducted during the spring of 2011, 10 sediment samples and 15 mollusks from each of the following species: Saccostrea cucullata, Solen brevis, and Callista umbonella, were simultaneously collected. Soft tissue, shell, and sediment were tested for metals using an atomic absorption spectrophotometer. Geochemical fractions of the sediment were examined for metals using a sequential extraction technique. Our results indicate that over half of Cd and Pb in the sediment had natural origins. Independent sample t test showed statistically significant (p?<?0.05) inter-tissue differences in accumulation of Cd and Pb. Soft tissue of C. umbonella contained highest levels of Cd. Pb accumulation was highest in S. brevis shell. Significant correlations (p?<?0.05) were found between Cd in the soft tissue of C. umbonella and its levels in the geochemical fractions of the sediment. Lead levels in the resistant geochemical fractions of the sediment and S. brevis shell were significantly correlated. Our results suggest that soft tissue of C. umbonella and shell of S. brevis are reliable biomonitoring tools for Cd and Pb, respectively.     

Hazardous waste site identification using aerial photography: A pilot study in Burlington County,New Jersey,USA

The objective of the project was to identify all hazardous waste sites in Burlington County, New Jersey that could be detected on existing, medium-scale aerial photographs of the county. The complete set of over 1000 black- and-white stereopairs at a scale of 1:12,000 was carefully examined for initial identification of possible sites. All suspicious sites were examined again on color transparencies of the county at the same 1:12,000 scale. Out of the 1094 black- and-white photos, 250 required further checking on color transparencies using a zoom stereoscope. This examination resulted in a final identification of 67 sites, the locations of which were delineated on 1:24,000 USGS maps. The use of air photo interpretation techniques provided an effective procedure for identifying waste sites quickly as well as providing a useful demonstration program for county and state officials.     

Antimony induces oxidative stress and cell death in normal hepatocytes

Antimony (Sb) accumulates in the liver which is one of the target organs for metal-mediated toxicity. Although toxicity of Sb was previously investigated, the precise mechanism of Sb-induced hepatotoxicity remains to be determined. The aim of this study was to examine the role of oxidative stress, and mitochondria in the induction of cell death by Sb. Our results showed that liver cell lysis induced by Sb is mediated by reactive oxygen species (ROS) formation, lipid peroxidation and decline of mitochondrial membrane potential (MMP). Antimony-induced ROS formation, lipid peroxidation and reduction of MMP were significantly diminished by antioxidants and ROS scavengers such as dimethyl sulfoxide and mannitol; mitochondrial permeability transition (MPT) pore sealing agents such as carnitine and trifluoperazine; and adenosine triphosphate (ATP) generator, L-glutamine. Antimony-induced ROS formation, lipid peroxidation and fall in MMP were potentiated by glutathione (GSH) depletion via n-bromoheptane. MPT pore sealing agents and ATP generator inhibited hepatotoxicity, indicating Sb-activated cell death via mitochondrial pathway. Pretreatment of hepatocytes with antioxidants and ROS scavengers also blocked cell death induced by Sb, whereas GSH depletion enhances Sb-induced cell death, suggesting that oxidative stress may be directly involved in the reduction of MMP. These findings contribute to a better understanding of the mechanisms that mediate Sb-induced cell death in isolated rat hepatocytes.     

Modified biochar from Moringa seed powder for the removal of diclofenac from aqueous solution

Environmental Science and Pollution Research - In this study, Moringa seed powder (MSP) was pyrolyzed at 450 °C to synthesize Moringa seed powder biochar (MSPB) and treated with phosphoric...     

Drivers of local people’s participation in sustainable natural resource management: a case study in central Iran

The driving forces behind natural resource management (NRM) vary among countries. Most NRM programmes focus on biophysical drivers such as soil, water and vegetation, with little attention directed towards the nuanced sociocultural and religious drivers of sustainable natural resource management (SNRM) practices. This paper explores those understudied drivers that influence local people’s participation (LPP) in SNRM in Isfahan, Iran. Using a multi-stage stratified sampling method, we selected 200 natural resource experts and natural resource users to complete a questionnaire about their perceptions of SNRM. Results reveal that sociocultural and religious beliefs are the major drivers of SNRM. The results also indicate that subsidiary drivers include: a sense of responsibility towards SNRM; the conviction that natural resources belong to God and should therefore be preserved; participation to preserve natural resources because of training courses and media influence; a long-established custom of preserving natural resources; and the specific impact of environmental television programmes. Demographic analysis finds a significant relationship between educational level and LPP in SNRM. This study’s results therefore suggest that natural resource managers would benefit from a deeper understanding of the local sociocultural and religious contexts that motivate people to participate in SNRM.     

Coupling of solvent-based de-emulsification dispersive liquid–liquid microextraction with high performance liquid chromatography for simultaneous simple and rapid trace monitoring of 2,4-dichlorophenoxyacetic acid and 2-methyl-4-chlorophenoxyacetic acid

A simple, rapid, and efficient sample pretreatment technique, based on solvent-based de-emulsification dispersive liquid–liquid microextraction (SD-DLLME), followed by high performance liquid chromatography (HPLC) has been developed for simultaneous preconcentration and trace detection of 2,4-dichlorophenoxyacetic acid (2,4-D) and 2-methyl-4-chlorophenoxyacetic acid (MCPA) in water and urine samples. Some parameters such as acidity of solution, the amount of salt, type, and volume of extraction solvents, type of disperser/de-emulsifier solvent, and its volume were investigated and optimized. Under optimum extraction conditions, the limits of detections (LODs) of this method for MCPA and 2,4-D were 0.2 and 0.6 μg L^?1 (based on 3S_b/m) in water and 0.4 and 1.6 μg L^?1 in urine, respectively. Furthermore, dynamic linear range of this method for MCPA and 2,4-D was 1–300 and 2–400 μg L^?1, repectively. Finally, the applicability of the proposed method was evaluated by extraction and determination of the herbicides in urine and different water samples.     

Simultaneous monitoring of SARS-CoV-2, bacteria,and fungi in indoor air of hospital: a study on Hajar Hospital in Shahrekord,Iran

The novel SARS-CoV-2 outbreak was declared as pandemic by the World Health Organization (WHO) on March 11, 2020. Understanding the airborne route of SARS-CoV-2 transmission is essential for infection prevention and control. In this study, a total of 107 indoor air samples (45 SARS-CoV-2, 62 bacteria, and fungi) were collected from different wards of the Hajar Hospital in Shahrekord, Iran. Simultaneously, bacterial and fungal samples were also collected from the ambient air of hospital yard. Overall, 6 positive air samples were detected in the infectious 1 and infectious 2 wards, intensive care unit (ICU), computed tomography (CT) scan, respiratory patients’ clinic, and personal protective equipment (PPE) room. Also, airborne bacteria and fungi were simultaneously detected in the various wards of the hospital with concentrations ranging from 14 to 106 CFU m^?3 and 18 to 141 CFU m^?3, respectively. The highest mean concentrations of bacteria and fungi were observed in respiratory patients’ clinics and ICU wards, respectively. Significant correlation (p < 0.05) was found between airborne bacterial concentration and the presence of SARS-CoV-2, while no significant correlation was found between fungi concentration and the virus presence. This study provided an additional evidence about the presence of SARS-CoV-2 in the indoor air of a hospital that admitted COVID-19 patients. Moreover, it was revealed that the monitoring of microbial quality of indoor air in such hospitals is very important, especially during the COVID-19 pandemic, for controlling the nosocomial infections.

     

Alum-based sludge (AbS) recycling for turbidity removal in drinking water treatment: an insight into statistical,technical, and health-related standpoints

This study aimed to evaluate the feasibility of recycling alum-based sludge (AbS) generated from drinking water treatment facility for turbidity removal. A response surface methodology (RSM)-based modeling and factor analysis were first implemented for assessing the optimal conditions of four independent factors, such as initial turbidity concentration, humic acid (HA) concentration, pH, and AbS dose on the water turbidity removal via the use of AbS as a coagulant agent. The optimum values of the four main variables were determined as initial turbidity concentration?=?59.65 NTU, pH?=?5.56, AbS dose?=?19.71 g/L, and HA concentration?=?12.28 mg/L, and at the optimum conditions, the percentage of turbidity removal was obtained as 94.81 (±?1.01)% for real water. At the optimum conditions of AbS usage as a coagulant for real water samples, monitoring of water quality parameters of the process indicated no health-related concerns in terms of hardness (all types), alkalinity, pH, residual aluminum, and even bacteriological (fecal and total coliforms) contamination. The results indicated a potential for AbS recycling in the treatment plant as a coagulant agent, although some requirements should be fulfilled before full-scale application.     

Effect of Oxidized Starch on Morphology,Rheological and Tensile Properties of Low-Density Polyethylene/Linear Low-Density Polyethylene/Thermoplastic Oxidized Starch Blends

In this work, morphology, rheological and tensile properties of low-density polyethylene/linear low-density polyethylene/thermoplastic oxidized starch (LDPE/LLDPE/TPOS) blends are studied. The blends of LDPE/LLDPE (70/30, w/w) containing 0–20 wt% TPOS in the presence of 3 wt% of PE-grafted maleic anhydride (PE-g-MA) as a compatibilizer are prepared by a twin screw extruder and then converted to appropriate thin films using an extrusion film blowing machine. Scanning electron microscopic images show that there is a relative good dispersion of oxidized starch particles in PE matrices. However, as TPOS content in the blends increases, the starch particle size increases too. The rheological analyses indicate that TPOS can decrease the elasticity and viscosity of the blends. The LDPE/LLDPE/TPOS blends show power-law behavior and as the TPOS content increases the power-law exponent (n) and consistency index (K) decrease. The ultimate tensile strength and elongation at break of the final blend films reduce, when TPOS content increases from 5 to 20 wt%. However, the required mechanical properties for packaging applications are achieved when 10 wt% oxidized starch is added, according to ASTM D4635.