Occurence and Distribution of Polycyclic Aromatic Hydrocarbons in Ankara Precipitation

Urban atmospheric environment contains many trace organic pollutants that are related to the incomplete fuel combustion in domestic heating, industrial plants and automobile traffic. Removal of these pollutants from the atmosphere takes place through wet and dry deposition as well as chemical transformations. In this study, concentrations of polycyclic aromatic hydrocarbons (PAHs) in wet deposition samples were determined at an urban site of Turkey. Wet and dry deposition samples were collected using Andersen Rain Sampler. The sampler was modified accordingly for the collection of organic pollutants. Collected samples were preconcentrated by using solid phase extraction (SPE) disks and consecutively analyzed by Gas Chromatography-Mass Spectrometry (GC-MS). Among the 13 compounds quantified in this study, anthracene, fluoranthene, and pyrene were found more frequently and at elevated concentrations (202, 271 and 260 ng L^-1 mean concentrations, respectively).Concentrations of PAHs were found to be high in winter period.     

Study of Trace and Heavy Metals in Rural and Urban Aerosols of Uludağ and Bursa (Turkey)

The concentrations of heavy, trace elements and major ions measuredin the Uluda and Bursa aerosols were investigated to assess size distributions, spatial and temporal variability, sources and source regions affecting the composition of aerosols in Uluda and Bursa. A total of 81 samples were collected in two sites, one in Bursa city and another in the Uluda Mountain during two sampling campaigns. Daily samples were collected using a high volume sampler on Whatman 41 cellulose filters in Uluda, while three days interval samples were collected in Bursa using an automatic dichotomous sampler on PTFE Teflon filters. Samples were analysed for 15 trace and heavy metals (Al, Fe, Ba, Na, Mg, K, Mn, Ca, Cu), (V, Pb, Cd, Cr, Ni, Zn), and 4 major ions (SO₄ ^2-, NO₃ ^-, Cl^-), (NH₄ ⁺) using ICP-AES, GFAAS, HPLC and UV/VIS Spectrophotometer,respectively. In general, concentrations of the metals measured inUluda aerosols were lower than those in Bursa. The concentrations of crustal elements were higher in summer than winter, while anthropogenic elements had higher concentrations in winter than summer. Most of the mass of crustal elements was concentrated in the coarse mode while the mass of the heavy metals was concentrated in the fine mode. Factor analysis revealed four factors with sources including crustal, industrial and combustion. Back trajectory calculations were used to determine long range contributions. These calculations showed that contributions were mostly from European countries, former Soviet Union countries, Black Sea and North Africa.     

Air pollution forecasting in Ankara, Turkey using air pollution index and its relation to assimilative capacity of the atmosphere

A conditional time-averaged gradient (COTAG) system has been developed to provide direct long-term (weekly to monthly) average flux gradient measurements for a range of trace gases, between land and atmosphere. Over daily periods, atmospheric conditions can range from high stability, where the vertical gradients of ambient concentration are enhanced due to very small diffusivity, to highly unstable conditions, in which concentration gradients are small due to the intense turbulent activity of the surface layer. The large vertical gradients generated by high stability would bias the estimate of the actual flux: to avoid this, the COTAG system samples conditionally, within a carefully refined range of stability. A comparison with a continuous flux gradient system suggested that the removal of stable conditions from the sampling period does not substantially modify the evaluation of the long-term fluxes.     

Air and groundwater pollution in an agricultural region of the Turkish Mediterranean coast

Air pollution and groundwater pollution in conjunction with agricultural activity were investigated in Antayla province on the Turkish Mediterranean coast. The air pollution was investigated in terms of gas-phase nitric acid (HNO3), sulfur dioxide (SO2), ammonia (NH3), and particulate matter for a 6-month period in the atmosphere using a "filter pack" system, which was developed and optimized in our laboratory. Ozone was measured by using an automated analyzer. Among all of the gas-phase pollutants, HNO3 had the lowest concentration (0.42 microg x m(-3)) followed by NH3. Agricultural activities seem to be the major source of observed NH3 in the air. The current state of water pollution was investigated in terms of organochlorine and organophosphorus pesticides around the greenhouses, in which mainly tomato, pepper, and eggplant are cultivated. Water samples were collected from 40 points, 28 of which were wells and 12 of which were surface water. The pesticide concentrations in water samples were determined by means of solid-phase extraction (SPE) followed by a gas chromatography (GC)-electron capture detector (ECD)/nitrogen phosphorus detector (NPD) system. In general, surface water samples were more polluted by the pesticides than groundwater samples. The most frequently observed pesticides were chlorpyriphos (57%) and aldrin (79%) in groundwater, and chlorpyriphos (75%), aldrin, and endosulfan sulfate (83%) in surface water samples. The highest concentrations were observed for fenamiphos (394.8 ng/L) and aldrin (68.51 ng/L) in groundwater, and dichlorvos (322.2 ng/L) and endosulfan sulfate (89.5 ng/L) in surface water samples. At least one pesticide had a concentration above the health limit in 38% of all the water samples analyzed.     

Feasibility of Applying a Stable Isotopic Tracer for Direct Determination of Dry Particulate Deposition to Soybean Plants

ABSTRACT

A stable rare-earth isotopic tracer was used to measure the deposition of KNO₃ particles on soybean leaves by direct measurement of the tracer on the plant surfaces by thermal-ionization mass spectrometry. Submicrometer particles, made from a solution containing 3 |mg mL^-1 neodymium isotope (¹⁴⁸Nd, 87.9%) and 1,000 mg mL^-1 KNO₃, were dispersed with a two-fluid nozzle and released upwind of a soybean field. Total suspended- and size-fractionated-aerosol particles were collected on an open-face filter and in a micro-orifice impactor, respectively, at a distance of 40 m from the release point. Soybean leaves exposed to the plume were collected at distances ranging from 25 to 100 m. As little as 5.5 pg of the tracer (i.e., excess ¹⁴⁸Nd) was detected in soybean leaves at signal-to-noise ratios ranging from 7,500 to 240,000, in the presence of 200 to 2,700 pg of naturally occurring Nd. The dry-particle deposition velocity, determined from the ratio of the aerial concentration and directly deposited aerosol (geometric mass mean diameter, 0.20 mm) flux, and its corresponding analytical uncertainty were 0.30 cm sec^-1 and 2.5%, respectively.     

Application of multivariate statistical techniques in the assessment of surface water quality in Uluabat Lake, Turkey

The application of different multivariate statistical approaches for the interpretation of a complex data matrix obtained during the period 2004-2005 from Uluabat Lake surface water is presented in this study. The dataset consists of the analytical results of a 1 year-survey conducted in 12 sampling stations in the Lake. Twelve parameters (T, pH, DO, [Formula: see text], NH(4)-N, NO(2)-N, NO(3)-N, [Formula: see text], BOD, COD, TC, FC) were monitored in the sampling sites on a monthly basis (except December 2004, January and February 2005, a total of 1,296 observations). The dataset was treated using cluster analysis, principle component analysis and factor analysis on principle components. Cluster analysis revealed two different groups of similarities between the sampling sites, reflecting different physicochemical properties and pollution levels in the studied water system. Three latent factors were identified as responsible for the data structure, explaining 77.35% of total variance in the dataset. The first factor called the microbiological factor explained 32.34% of the total variance. The second factor named the organic-nutrient factors explained 25.46% and the third factor called physicochemical factors explained 19.54% of the variances, respectively.     

Effect of cycle time on biodegradation of azo dye in sequencing batch reactor

The effects of cycle time on the biodegradation of the azo dye remazol brilliant violet 5R (RBV-5R) were investigated in an anaerobic–aerobic sequencing batch reactor (SBR). System performance was determined by monitoring chemical oxygen demand (COD), color, anaerobic enzyme (azo reductase) and aerobic enzyme (catechol 2,3-dioxygenase), and aromatic amine concentration. SBR was operated in three different total cycle times (48 h, 24 h and 12 h), fed with a synthetic textile wastewater. In this study, the anaerobic period of SBR was found to allow the reductive decolorization of azo dye and the aerobic period was found to be effective on further COD removal after the anaerobic period. The percentage reductions in color by the anaerobic stage of the SBR were at 72%, 89% and 86% for the 24-h, 12-h and 6-h cycle times, respectively. Total COD removal efficiencies were over 75% for all operational conditions and about 70% of the COD removal was achieved in the first 3 h of anaerobic stages. During the decolorization of RBV-5R, two sulfonated aromatic amines (benzene-based and naphthalene-based) were formed and detected by HPLC. Aerobic phases of SBR with total cycle times of 48 h, 24 h and 12 h were able to remove benzene-based aromatic amines with removal efficiency of 64%, 92% and 89%, respectively. The results indicated that the best SBR performance in terms of color removal and aromatic amine degradation was achieved from total cycle time of 24 h.     

Measurement of Traffic Related Toxic Air Pollutants in an Urban Atmosphere

Nose-level measurements of air toxics were made along a busy urban street in Ottawa, Canada for 2 hr periods during morning, noon, and afternoon rush hours in the winter and summer of 2000. Measurements were also made in a commuter car and a transit bus during morning and afternoon commutes in 2000. The main objectives of the study were to establish a database, to determine temporal and seasonal variations and to determine the contribution of motor vehicle traffic to the measured toxic substance concentrations. Ottawa is an appropriate choice of location for the measurement of motor vehicle related toxic and reactive compounds, as it has virtually no industrial sources that could be contributing to the ambient loadings. Samples were collected for a total of 165 volatile organic compounds and 25 carbonyl compounds. Sampling and analytical methodologyare discussed and results are presented. Toluene, ethylene andformaldehyde were the most abundant pollutants in Ottawa during both winter and summer. Total non-methane hydrocarbon concentrationwas measured as 100 g m^-3 at nose-level measurements in Ottawa.     

Immobilization of copper flotation waste using red mud and clinoptilolite

The flash smelting process has been used in the copper industry for a number of years and has replaced most of the reverberatory applications, known as conventional copper smelting processes. Copper smelters produce large amounts of copper slag or copper flotation waste and the dumping of these quantities of copper slag causes economic, environmental and space problems. The aim of this study was to perform a laboratory investigation to assess the feasibility of immobilizing the heavy metals contained in copper flotation waste. For this purpose, samples of copper flotation waste were immobilized with relatively small proportions of red mud and large proportions of clinoptilolite. The results of laboratory leaching demonstrate that addition of red mud and clinoptilolite to the copper flotation waste drastically reduced the heavy metal content in the effluent and the red mud performed better than clinoptilolite. This study also compared the leaching behaviour of metals in copper flotation waste by short-time extraction tests such as the toxicity characteristic leaching procedure (TCLP), deionized water (DI) and field leach test (FLT). The results of leach tests showed that the results of the FLT and DI methods were close and generally lower than those of the TCLP methods.