Toxic cyanobacteria and microcystin dynamics in a tropical reservoir: assessing the influence of environmental variables

Environmental Science and Pollution Research - Toxic cyanobacterial blooms (TCBs) have become a growing concern worldwide. The present study investigated the dynamic of toxic cyanobacteria and...     

Biodegradation of heptachlor and heptachlor epoxide-contaminated soils by white-rot fungal inocula

The ability of certain white-rot fungi (WRF) inocula to transform heptachlor and heptachlor epoxide and its application in artificially contaminated soil were investigated. Fungal inoculum of Pleurotus ostreatus eliminated approximately 89 % of heptachlor after 28 days of incubation, and chlordene was detected as the primary metabolite. The fungal inoculum of Pleurotus ostreatus had the highest ability to degrade heptachlor epoxide; approximately 32 % were degraded after 28 days of incubation, and heptachlor diol was detected as the metabolite product. Because Pleurotus ostreatus transformed heptachlor into a less toxic metabolite and could also effectively degrade heptachlor epoxide, it was then selected to be applied to artificially contaminated soil. The spent mushroom waste (SMW) of Pleurotus ostreatus degraded heptachlor and heptachlor epoxide by approximately 91 and 26 %, respectively, over 28 days. This finding indicated that Pleurotus ostreatus SMW could be used to bioremediate heptachlor- and heptachlor epoxide-contaminated environments.     

Recovery of benzene-rich oil from the degradation of metal- and metal oxide-containing poly(ethylene terephthalate) composites

Pure poly(ethylene terephthalate) (PET) resin and metal-/metal oxide-containing PET composites were thermally decomposed in the presence of Ca(OH)₂ using a tube reactor. The effects of batch and continuous processing, the presence of Ca(OH)₂, and PET size on benzene production were investigated. A maximum benzene yield and purity of 82.9 % and 78.8 wt%, respectively, were obtained at 700 °C in the presence of Ca(OH)₂ when using small PET particles; further, a continuous feed reactor was favored over a batch reactor. Effective contact between PET and Ca(OH)₂ was important in the PET degradation, which promoted hydrolysis of PET and decarboxylation of terephthalic acid, whereas pyrolysis was suppressed. Furthermore, the results of thermal decomposition of PET-based waste—PET-based X-ray films, magnetic tape, and prepaid cards—indicated that the metal and metal oxides contained in the waste had no significant catalytic effect on PET degradation or on the recovery of benzene-rich oil in the presence of Ca(OH)₂.     

Crystallization Behavior and Dynamic Mechanical Properties of Poly(l-Lactic Acid) with Poly(Ethylene Glycol) Terminated by Benzoate

Effect of the addition of poly(ethylene glycol) terminated by benzoate (PEG-BA) on the crystallization behavior and dynamic mechanical properties of poly(l-lactic acid) PLLA is studied as compared with poly(ethylene glycol) (PEG-OH). It is found that PEG-BA is miscible with PLLA and shows good plasticizing effect. Because PEG-OH having the same degree of polymerization is immiscible with PLLA, the end group in PEG-BA, i.e., benzoate, plays an important role in the miscibility. Furthermore, PEG-BA does not induce the PLLA degradation at melt-processing, whereas PEG-OH leads to the hydrolysis degradation. Finally, the addition of PEG-BA pronounces the crystallization rate of PLLA at low crystallization temperatures and thus enhances the degree of crystallinity at conventional processing. Consequently, the temperature dependence of dynamic mechanical properties are similar to that for isotactic polypropylene.     

Liquefaction process for a hydrothermally treated waste mixture containing plastics

Most landfilled plastic waste is a mixture or is in the form of composites with incombustible wastes such as glass, metals, and ceramics. After hydrothermal treatment, including a steam-explosion process, the separation of mixed waste (MW) into organic and inorganic substances becomes easy. However, the effect of hydrothermal pretreatment on the subsequent liquefaction of organic substances from MW is not obvious. In this study, the effects on the liquefaction of polystyrene and high-density polyethylene are discussed. Moreover, optimum conditions for the liquefaction of organic substances from hydrothermally treated MW are identified. By means of this hydrothermal pretreatment, including the steam-explosion process, polystyrene and high-density polyethylene can be significantly converted to oil by liquefaction at 300°–400°C. In comparison with liquefaction of hydrothermally pretreated mixed waste (HMW) at 300°–400°C with a batch type reactor, the yield of oil increases significantly on liquefaction using a semi-batch type reactor. It is considered that the radical chain and termination reactions among the radicals from HMW were inhibited in the semi-batch type reactor. On liquefaction of HMW in a semi-batch reactor, the conversion of HMW to oil was enhanced on increasing the liquefaction temperature to 350°C and the holding time to 60 min. Chemical Feedstock Recycling & Other Innovative Recycling Techniques 6     

Understanding productivity declines of resource accumulation in the prefectures of Japan

Environmental Economics and Policy Studies - This study employs a data envelopment analysis (DEA) framework using long-term panel data of the physical stocks of buildings and infrastructure...     

Identification of the dimethylbenzyl mercapturic acid in urine of rats treated with 1,2,3-trimethylbenzene.

The structure was investigated of the mercapturic acid excreted in urine of rats after the i.p. administration of 1,2,3-trimethylbenzene. Of the two regioisomeric mercapturic acids, i.e. N-acetyl-S-(2,3-dimethylbenzyl)-L-cysteine and N-acetyl-S-(2,6-dimethyl-benzyl)-L-cysteine, only the former was isolated by preparative HPLC and identified, by comparison with an authentic specimen. The excretion rate of the mercapturate was estimated to be approximately 5% of dose, not a substantial metabolic route.     

Age-related settlement success by cyprids of the barnacleBalanus amphitrite,with special reference to consumption of cyprid storage protein

Newly molted (0-d-old) cyprids of the barnacleBalanus amphitrite Darwin were prevented from settling for 0 to 14 d at four different temperatures (25, 20, 15 and 5°C treatments). The effect on settlement success of prolonging the cyprid lifetime was evaluated using a nitrilocellulose membrane assay. In addition, protein extract prepared from these cyprids was analyzed using gel electrophoresis to characterize the effect of age on protein content and composition. Settlement success was significantly affected for larvae aged at 25 (P < 0.001), 20 (P < 0.001) and 15°C (P < 0.05), while differences in settlement success between age groups was negligible at 5°C (P = 0.09). Settlement success of cyprids increased with time for up to 3 d (P < 0.001, Phase 1), following which settlement success significantly declined (P < 0.001, Phase 11). Temperature had no significant effect on settlement in Phase I (P = 0.17), but did enhance the decline in settlement success with age during Phase II (P < 0.001). Gel electrophoresis revealed a significant decline in the quantity of the cyprid storage protein CMP (Cyprid Major Protein) with increasing age at 25, 20 and 15°C, but CMP levels remained constant at 5°C. These results suggest that, upon molting to the cyprid stage, larvae may still require a settlement-competence attainment period. This may be achieved by CMP utilization during Phase I, depletion of which during Phase II may be responsible for reduction in settlement success with cyprid age such that remaining CMP stores can no longer support the production of adult structures following settlement.