Archaeal Poly (3-hydroxybutyrate) Polymer Production from Glycerol: Optimization by Taguchi Methodology

In this study the possibility of poly (3-hydroxybutyrate) production from glycerol was investigated and optimized by Halorcula sp. IRU1, a novel archaea isolated from Urmia lake, Iran in batch experiments. Using Taguchi methodology, three important independent parameters (glycerol, yeast extract and KH₂PO₄) were evaluated for their individual and interactive effects on poly (3-hydroxybutyrate) production. It was shown that the glycerol concentration was the most significant factor affecting the yield of poly (3-hydroxybutyrate). The optimum factor levels were a glycerol concentration of 8% (v/v), yeast extract 0.8% (w/v) and KH₂PO₄ 0.002% (w/v). The predicted value obtained for poly (3-hydroxybutyrate) production under these conditions was about 81.87%. We can conclude that Haloarcula sp. IRU1 has a high potential for synthesis of poly (3-hydroxybutyrate) from glycerol.     

Vermiculture and waste management: study of action of earthworms Elsinia foetida, Eudrilus euginae and Perionyx excavatus on biodegradation of some community wastes in India and Australia

The practice of vermiculture is at least a century old but it is now being revived worldwide with diverse ecological objectives such as waste management, soil detoxification and regeneration and sustainable agriculture. Earthworms act in the soil as aerators, grinders, crushers, chemical degraders and biological stimulators. They secrete enzymes, proteases, lipases, amylases, cellulases and chitinases which bring about rapid biochemical conversion of the cellulosic and the proteinaceous materials in the variety of organic wastes which originate from homes, gardens, dairies and farms. The process is odour free because earthworms release coelomic fluids in the decaying waste biomass which has anti-bacterial properties which kills pathogens. The species used in India were Indian blue (Perionyx excavatus), African night crawler (Eudrilus euginae) and the Tiger worm (Elsinia foetida). E. foetida was used in Australia. E. euginae was found to have higher feeding, growth and biodegradation capacity compared to other two species.Earthworm action was shown to enhance natural biodegradation and decomposition of wastes (60–80 percent under optimum conditions), thus significantly reducing the composting time by several weeks. Within 5 to 6 weeks, 95–100 percent degradation of all cellulosic materials was achieved. Even hard fruit and egg shells and bones can be degraded, although these may take longer.     

Decolorization and degradation of acid dye with immobilized titania nanoparticles

This paper addresses the decolorization and degradation of acid dye by a heterogeneous photocatalytic process using immobilized nano-sized TiO₂ particles as the photocatalyst. Sackcloth fiber was used as a support to immobilize the nano-sized TiO₂ photocatalyst. The structural properties of the immobilized photocatalyst were characterized by XRD, SEM and EDX. UV–Vis absorption spectroscopy and the measurement of the chemical oxygen demand (COD) were also used for the process performance studies. The XRD results did not show significant changes in the structure of P25 as a consequence of the immobilization procedure. The formation of titania crystallites in the sackcloth fiber was confirmed by SEM/EDX. The photocatalytic activities of TiO₂-coated sackcloth fiber catalyst were evaluated using Acid Black 26 as a model organic contaminant and using UV-A radiation. Experimental results showed that after 60 min, the degradation of Acid Black 26 with the immobilized TiO₂ particles was higher than that with plain TiO₂. Based on the COD results, after 3 h, the TiO₂-coated sackcloth fiber effectively decomposed all of the organic compounds present in dye solution under the studied experimental conditions. The effects of the oxidant H₂O₂, initial dye concentration and pH on the photocatalytic degradation were also investigated. The presence of CO₃^2? as a dissolved inorganic anion had the highest inhibitory effect on the decolorization of the dye, when compared with the other anions investigated. Kinetics analysis indicates that the photocatalytic decolorization rate of Acid Black 26 can be described by a pseudo-first-order model.     

Usage of polystyrene disposable food dishes in the lightweight concrete making

The increasing use and subsequent accumulation of polystyrene containers has triggered a substantial environmental problem. This study investigated using varied percentages of solid waste polystyrene disposable food dishes in the production of lightweight concrete samples with 350 kilograms per cubic meter (kg/m³) of cement and a density of 1,300 kg/m³. The polystyrene disposable dishes were ground into beads of 0–3 millimeters (mm) and 3–6 mm in size. First, the characteristics of Type II Portland cement, polystyrene, and aggregates were examined. The following characteristics of concrete using ASTM International and British Standards Institution standards were tested: slump, compressive strength, ability to resist chloride ion penetration, and resistance of concrete to rapid freezing and thawing cycles. Scanning electron microscopy (SEM) and energy dispersive X‐ray spectroscopy analytical techniques were also used. The slump of samples varied between 40 and 70 mm and was not dependent on either the polystyrene percentage or the size of the polystyrene beads in the concrete samples (p‐value > .05). The compressive strength of the concrete samples after 90 days of curing, and using different percentages of polystyrene, varied between 96 and 113 kilograms per square centimeter (kg/cm²). The resistance of the samples to the freezing and thawing cycle and chloride ion penetration were affected unfavorably by the presence of the polystyrene. The SEM technique indicated that concrete samples containing 15% and 25% polystyrene had denser crystals and less void than concrete samples with 40% and 55% polystyrene.     

The formation of aerobic granular sludge for the treatment of real landfill leachate using a granular sequencing batch reactor at a constant volume

Leachate generated in a landfill may not be treated by conventional biological treatment due to its nature and complexity. The process of forming aerobic granules in batch sequencing reactors having features such as; reducing the settling process time and saving energy consumption and high decomposition rate have been noticed by researchers. In the present study, the structure of sequencing batch reactors (SBRs) was evaluated for the formation of granules, which were subsequently utilized for the treatment of landfill leachate. The experiment was initiated by using the GSBR, containing 1200 ml with different apparatuses, to develop granular sludge, and synthetic wastewater was added to reinforcement. The selected parameters for the operational hydraulic retention time (HRT) of the wastewater (6-h cycles) included feeding, idle, aeration, settling, and discharge. Furthermore, the controlled conditions were the dissolved oxygen (DO) range of 2–2.2 mg/L, temperature range of 20–23℃, and pH of 7.5–8.3. The chemical oxygen demand (COD), mixed liquor suspended solids (MLSS), and sludge volume index (SVI) daily were measured at the influent and effluent of GSBR reactor. The main properties of aerobic granular sludge were identified during the research procedures, and the remarkable settling and potent, high-density microbial structure of the granules were confirmed. The mean size of the formulated granules was estimated at 7.46 ± 1.8 mm, and the volume of the biomass also increased from approximately 1607 to 4137 mg/L through the granulation process. Moreover, 98% of the influent chemical oxygen demand (COD) could be removed by the formulated granular sludge, and the final-stage organic loading rate was estimated at 5.65 COD/m³/day. According to the results, GSBRs could be employed for the formulation of aerobic granular sludge for the treatment of landfill leachate.     

Insights to the oxidative desulfurization process of fossil fuels over organic and inorganic heterogeneous catalysts: advantages and issues

Environmental Science and Pollution Research - Strict environmental laws have been put in place around the world to reduce the amount of sulfur in the fuel to reduce the emissions of harmful gases...     

Survey of discomfort glare from the headlamps of cars widely used in Iran

Objective: On 2-lane roads, discomfort glare can cause annoyance, discomfort, inconvenience, stress, and fatigue to drivers, posing a risk of accidents. The aim of this study is to evaluate discomfort glare from the headlamps of cars widely used in Iran.

Methods: The discomfort glare of new vehicles including Pride Saba model GTX, Pride Model 131SL, Samand Soren, Peugeot 405, Megane, and Peugeot Pars was examined at distances of 5 to 100 m at a background luminance of 50 cd/m² (late twilight/early dawn lighting) and 1 cd/m² (nighttime) using Schmidt-Clausen and Bindels model and de Boer's subjective scale.

Results: According to the de Boer scale, at a background luminance of 50 cd/m², the discomfort glare for all studied vehicles was between 1.98 and 4.05 in high-beam mode and between 3.5 and 5.4 in low-beam mode. At a background luminance of 1 cd/m², discomfort glare was between 0.41 and 2.48 in high-beam mode and between 1.93 and 3.84 in low-beam mode. In high-beam mode, the average levels of discomfort glare of these vehicles gradually increased when the distance between cars was reduced by up to about 20 m. In low-beam mode, there was no discomfort glare up to a vehicle distance of 40 m. In addition, at an angle of 1.15°–5.73° between the line of sight and light of vehicles in high-beam mode, the level of discomfort glare was increased, but at an angle of 5.73°–22.9° the level of discomfort glare was reduced. In low-beam mode at an angle of 2.86°–22.9°, the level of discomfort glare was almost identical. The results show that in high-beam mode and with a 100-m distance between vehicles as well as in low-beam mode at intervals of less than 40 m between cars, discomfort glare is created.

Conclusion: It can be concluded that by providing solutions such as installing road lighting system, an increase in luminance of roads, separating or widening road lanes, increasing the lateral distance between vehicles, and increasing the angle between lighted vehicles and drivers can noticeably reduce discomfort glare.     

Urban growth containment policies for the guidance and control of peri-urbanization: a review and proposed framework

The purpose of this study is a review of urban growth containment policies for the guidance and control of peri-urbanization. The review of selected resources illustrates two policies: "urban growth containment policies based on planning interventions (UGCPI)" and "urban growth containment policies based on financial interventions (UGCFI)". The analysis of these policies reveals their distinct effects inside and outside the metropolitan boundaries, which, despite the positive results, create various practical consequences and challenges. This highlights the necessity of a special framework of growth guidance and control of peri-urbanization in response to the consequences and challenges of previous policies. The proposed framework is based on the four fundamental components, including regular growth, continuous activity interactions, optimal performance, and institutional capacity building that integration between them can make it possible to guide changes during the time. Certainly, the consequence of such an approach is the regular functional and structural landscape of peri-urban areas in the twenty-first century.

     

Health risk assessment of occupational exposure to styrene in Neyshabur electronic industries

Environmental Science and Pollution Research - Styrene is one of the essential components in making thousands of everyday products. Occupational exposure to styrene causes pulmonary, neurological,...     

Changes in urinary catecholamines in response to noise exposure in workers at Sarcheshmeh Copper Complex, Kerman, Iran

Noise is one of the most harmful agents in the workplace. In addition to the adverse effects of noise on the auditory system, as a stressor it may cause increased blood pressure, cardiovascular disease, anxiety, and impaired secretion of hormones. The purpose of this study was to evaluate changes in urinary catecholamines in workers exposed to industrial noise. This is an experimental study of the workers at the smelter section of Sarcheshmeh Copper Industries done on two separate days. During the first day, urine samples from 20 workers who did not use any hearing protection device, were collected during an 8-h work shift and on the second day the same was done but they were asked to use earplugs. Also 20 people were selected as a control group from people who were not exposed to noise at work. Urinary catecholamine levels were measured with ELISA kits. The mean urinary epinephrine and norepinephrine levels in the workers (without earplugs) was respectively 8.69 and 35.56 μg/8h on the first day and on the second day (with earplugs) dropped to 6.45 and 30.95 μg/8h. Noise reduction by earplugs led to almost significant reductions in urinary epinephrine (p?=?0.05) and significant reductions in norepinephrine (p?=?0.02). The results showed that with noise reduction the urinary excretion of stress hormones, especially norepinephrine significantly decreases and workers are probably less prone to stress-related disorders.