Wayfinding with a GPS-based mobile navigation system: A comparison with maps and direct experience

This study examined the effectiveness of a Global Positioning System (GPS)-based mobile navigation system in comparison to paper maps and direct experience of routes, by focusing on the user's wayfinding behavior and acquired spatial knowledge. Based on information received from one of these three media, participants walked six routes finding the way to goals. Results showed that GPS users traveled longer distances and made more stops during the walk than map users and direct-experience participants. Also, GPS users traveled more slowly, made larger direction errors, drew sketch maps with poorer topological accuracy, and rated wayfinding tasks as more difficult than direct-experience participants. Characteristics of navigation with these three learning media and possible reasons for the ineffectiveness of the GPS-based navigation system are discussed.     

Evaluation of a recycling process for printed circuit board by physical separation and heat treatment

Printed circuit boards (PCBs) from discarded personal computer (PC) and hard disk drive were crushed by explosion in water or mechanical comminution in order to disintegrate the attached parts. More parts were stripped from PCB of PC, composed of epoxy resin; than from PCB of household appliance, composed of phenol resin.In an attempt to raise the copper grade of PCB by removing other components, a carbonization treatment was investigated. The crushed PCB without surface-mounted parts was carbonized under a nitrogen atmosphere at 873–1073 K. After screening, the char was classified by size into oversized pieces, undersized pieces and powder. The copper foil and glass fiber pieces were liberated and collected in undersized fraction. The copper foil was liberated easily from glass fiber by stamping treatment.As one of the mounted parts, the multi-layered ceramic capacitors (MLCCs), which contain nickel, were carbonized at 873 K. The magnetic separation is carried out at a lower magnetic field strength of 0.1 T and then at 0.8 T. In the +0.5 mm size fraction the nickel grade in magnetic product was increased from 0.16% to 6.7% and the nickel recovery is 74%.The other useful mounted parts are tantalum capacitors. The tantalum capacitors were collected from mounted parts. The tantalum-sintered bodies were separated from molded resins by heat treatment at 723–773 K in air atmosphere and screening of 0.5 mm. Silica was removed and 70% of tantalum grade was obtained after more than 823 K heating and separation.Next, the evaluation of Cu recycling in PCB is estimated. Energy consumption of new process increased and the treatment cost becomes 3 times higher comparing the conventional process, while the environmental burden of new process decreased comparing conventional process.The nickel recovery process in fine ground particles increased energy and energy cost comparing those of the conventional process. However, the environmental burden decreased than the conventional one.The process for recovering tantalum used more heat for the treatment and therefore the energy consumption increased by 50%, when comparing with conventional process. However, the market price for tantalum is very large; the profit for tantalum recovery is added. Also the environmental burden decreased by the recycling of tantalum recovery. Therefore, the tantalum recovery is very important step in the PCB recycling. If there is no tantalum, the consumed energy and treatment cost increase in the new process, though the environmental burden decreases.     

Overexpression of NADH oxidase gene from Deinococcus geothermalis in Escherichia coli

When using stable enzyme genes from a thermophile to create a biosensor in Escherichia coli, it is vital that these genes be overexpressed in order to provide a sufficient supply of enzymes. In this study, overexpression of the NADH oxidase (Nox) gene from the thermophile Deinococcus geothermalis was successfully achieved with the aim of creating a stable biosensor active at room temperatures. To do so, modification of 10 nucleotides, GAAATTAACT, upstream of the start codon of the Nox gene was necessary.     

Overexpression of NADH oxidase gene from Deinococcus geothermalis in Escherichia coli

When using stable enzyme genes from a thermophile to create a biosensor in Escherichia coli, it is vital that these genes be overexpressed in order to provide a sufficient supply of enzymes. In this study, overexpression of the NADH oxidase (Nox) gene from the thermophile Deinococcus geothermalis was successfully achieved with the aim of creating a stable biosensor active at room temperatures. To do so, modification of 10 nucleotides, GAAATTAACT, upstream of the start codon of the Nox gene was necessary.     

Two-step accelerated mineral carbonation and decomposition analysis for the reduction of CO2 emission in the eco-industrial parks

Carbon dioxide（CO2） emissions are a leading contributor to the negative effects of global warming. Globally, research has focused on effective means of reducing and mitigating CO2 emissions. In this study, we examined the efficacy of eco-industrial parks（EIPs） and accelerated mineral carbonation techniques in reducing CO2 emissions in South Korea.First, we used Logarithmic Mean Divisia Index（LMDI） analysis to determine the trends in carbon production and mitigation at the existing EIPs. We found that, although CO2 was generated as byproducts and wastes of production at these EIPs, improved energy intensity effects occurred at all EIPs, and we strongly believe that EIPs are a strong alternative to traditional industrial complexes for reducing net carbon emissions. We also examined the optimal conditions for using accelerated mineral carbonation to dispose of hazardous fly ash produced through the incineration of municipal solid wastes at these EIPs. We determined that this technique most efficiently sequestered CO2 when micro-bubbling, low flow rate inlet gas, and ammonia additives were employed.     

Removal of arsenic from wastewater using iron compound: Comparing two different types of adsorbents in the context of LCA

A study was carried out in order to compare the environmental performance of two different types of adsorbents in removing arsenic (As) from wastewater. A FeCl₃-based adsorbent and a poly-Fe-based adsorbent were first synthesized and their abilities in adsorbing As from wastewater were investigated in terms of the adsorption density and the rate of adsorption. Here, it should be noted that the main material being used in the synthesis of the poly-Fe-based adsorbent was a waste product, known as polyferric sulfate or poly-Fe in short, which exits the manufacturing process of titanium dioxide.Both adsorbents were then compared in the context of life-cycle assessment (LCA). In other words, the experimental results (i.e. the value of the adsorption density and the rate of adsorption) were input into the LCA model in order to assess the environmental performance of each adsorbent in removing arsenic. An estimate for the environmental burden of each option was finally calculated as the sum of the depletion of abiotic resources (ADP), the global warming potential (GWP), the acidification potential (AP), the photo-oxidant formation potential (POCP), the eutrophication potential (EP), and the human toxicity potential (HTP). The main finding of this study was that the adsorption of arsenic by using the poly-Fe-based adsorbent is more attractive treatment option in the environmental protection point of view than the adsorption by using the FeCl₃-based adsorbent, which generates a relatively larger environmental burden.     

Early life history of tropical Anguilla leptocephali in the western Pacific Ocean

In order to examine the early life-history characteristics of tropical eels, otolith microstructure and microchemistry were examined in leptocephali of Anguilla bicolor pacifica (27.6-54.1 mm TL, n=20) and A. marmorata (22.0-47.3 mm TL, n=8) collected during a cruise in the western Pacific. A. bicolor pacifica occurred between 10°N and 15°N in the west and between 5°S and 10°N farther to the east. A. marmorata also occurred in two different latitudinal ranges in the Northern (15-16°N) and Southern Hemispheres (3-15°S) of the western Pacific. The increment widths in the otoliths of these leptocephali increased between the hatch check (0 days) and about an age of 30 days in both species, and then gradually decreased toward the otolith edge. Otolith Sr:Ca ratios showed a gradual increase from the otolith center to the edge. The ages of A. bicolor pacifica and A. marmorata leptocephali ranged from 40 to 128 days and from 38 to 99 days, respectively. Growth rates of A. bicolor pacifica and A. marmorata leptocephali ranged from 0.33 to 0.71 mm day^-1 and from 0.45 to 0.63 mm day^-1, respectively. These leptocephali had estimated growth rates that were spread out throughout most of the reported range of growth rates of the leptocephali of the temperate species, the Japanese eel and the Atlantic eels. Differences in the spatial distribution in relation to current systems, and the age and size compositions of the leptocephali of A. bicolor pacifica and A. marmorata suggested different spawning locations for these two species.     

Heritable pheromone blend variation in a local population of the butterbur borer moth Ostrinia zaguliaevi (Lepidoptera: Crambidae)

Summary. In a local population of Ostrinia zaguliaevi Mutuura & Munroe (Lepidoptera: Crambidae), extensive variation was found in the blend ratio of three sex pheromone components, (Z)-9-tetradecenyl acetate (Z9-14:OAc, 10.2-63.8%), (Z)-11-tetradecenyl acetate (Z11-14:OAc, 32.2-86.8%), and (E)-11-tetradecenyl acetate (E11-14:OAc, 2.1-11.9%). The variation was observed over a three-year period (2002-2004). Mother-daughter regression analyses have shown that although the heritability of the minor component E11-14:OAc was not significant, the heritability of the proportions of Z9-14:OAc and Z11-14:OAc were substantial (0.5–0.6). In artificial selection experiments, the mean % Z9-14:OAc in the sex pheromone changed significantly within three generations (37% in the control line, 48 and 52% for two lines selected for increase, and 23 and 30% for two lines selected for decrease). Despite these changes, the amounts of fatty acyl pheromone precursors, (Z)-9-, (Z)-11- and (E)-11-tetradecenoate, in the pheromone gland were not significantly affected by the selection. Taken together, variation in the pheromone blend of O. zaguliaevi is likely to be attributable to a few genes involved in the reduction or acetylation of fatty acyl pheromone precursors, the last two steps in pheromone biosynthesis.     

Female sex pheromone of Ostrinia orientalis – throwing a light on the relationship between O. orientalis and the European corn borer, O. nubilalis

Summary. The sex pheromone of Ostrinia orientalis (Lepidoptera: Crambidae) was analyzed by gas chromatography–electroantennographic detection (GC–EAD), GC–mass spectrometry and a series of bioassays. Three EAD-active compounds were detected in the female sex pheromone gland extract, and identified as tetradecyl acetate (14:OAc), (Z)-11-tetradecenyl acetate (Z11-14:OAc) and (E)-11-tetradecenyl acetate (E11-14:OAc). The titers (ratio) of 14:OAc, Z11-14:OAc and E11-14:OAc in 3-day-old virgin females were 0.49 ng (10), 4.86 ng (98) and 0.10 ng (2), respectively. In a wind-tunnel bioassay, the 98:2 blend of Z11- and E11-14:OAc, but not Z11-14:OAc alone, elicited the same male behavioral responses as virgin females and crude gland extracts. 14:OAc was inactive by itself, and did not show any synergistic effect on the binary blend. Field trapping experiments also confirmed the attractiveness of the binary blend to O. orientalis males. Based on these results, we concluded that the sex pheromone of O. orientalis is a 98:2 mixture of Z11-14:OAc and E11-14:OAc. This sex pheromone is very similar to that of the Z-type European corn borer, O. nubilalis. The present finding raises the question of whether O. orientalis , which is indistinguishable from O. nubilalis based on external morphology, is a biologically distinct species independent from O. nubilalis.     

Mutagenicity of polyaromatic hydrocarbons by chemical models for cytochrome P450 in Ames assay

DNA damage is an important step in carcinogenesis. The Ames assay is a short-term screening of carcinogens that induce DNA damage. Most carcinogens require enzymatic activation through oxidation by cytochrome P450 (CYP450) in the presence of S9 mix. A combination of iron (Fe)(III) porphyrin and an oxidant is also able to oxidize compounds as an alternative metabolic pathway to CYP450. Previously it was reported that a chemical model containing a water-soluble 5,10,15,20-tetrakis(1-methylpyridinium4-yl)porphyrinatoiron(III) chloride (4-MPy) and tert-butyl hydroperoxide (t-BuOOH) activated aromatic amines and amides. In this study, a chemical model composed of an Fe porphyrin, water-insoluble 5,10,15,20-tetrakis(pentafluorophenyl)porphyrinatoiron(III) chloride (F₅P) or water-soluble 4-MPy was optimized with an oxidant – t-BuOOH, magnesium monoperoxyphthalate (MPPT), or iodosylbenzene (PhIO). Subsequently the mutagenicity of benzo[a]pyrene (B[a]P) and chrysene in Salmonella typhimurium TA strains was compared. B[a]P was activated by a combination of F₅P or 4-MPy plus MPPT or PhIO in S. typhimurium TA1538. The B[a]P-induced mutagenicity with F₅P plus oxidant was higher than 4-MPy plus oxidant. Mutagenicity of chrysene, a tetracyclic aromatic hydrocarbon, was not detected in the presence of F₅P/PhIO in S. typhimurium TA98, but was activated in the presence of F₅P/MPPT. The F₅P/MPPT activated other polyaromatic hydrocarbons (PAH) in the S. typhimurium TA98 assay including dibenz[a,c]anthracene, dibenz[a,h]anthracene, 3-methylcholanthrene, and benzo[a]anthracene. The results indicated that the F₅P/MPPT was the most efficient model for detecting PAH-induced mutagenicity in the Ames assay.