Review of environmental aspects and waste management of stone cutting and fabrication industries

Iran is the second largest stockholder of construction stones with 10 % of world production ;and there are more than 4000 stone cutting and fabrication industries (SCFIs). In the processing of raw stones, a considerable part of stone is turned into waste. Generated wastes include excess parts of different stones and sludge. The present paper reviews the state of SCFIs waste management using multiple data sources including site, analysis of effluent and sludge samples, and conducting interviews with people who are involved in 286 SCFIs in Qom and Tabriz. The results revealed that currently almost 35 to 52.5 % of raw stones were converted to solid wastes depending on stone cutting and processing methods, type of stones and their quality, which seemed a high percentage. Also, the effluents between 0.8 and 2.8 m³ were generated per ton of processed stone. Based on the analysis of heavy metals with atomic absorption spectroscopy, sludge samples contained a considerable amount of Pb, Cu, Cr, and Cd. It was also found that the lack of specific recycling, reuse and disposal programs and suitable supervision has led to uncontrolled disposal of stone wastes and sludge in different areas. However, there are good opportunities for reuse and recycling of the SCFIs wastes.     

Comparison of unmodified and modified BCR sequential extraction schemes for the fractionation of heavy metals in shrimp aquaculture sludge from Selangor, Malaysia

A study was carried out to investigate the fractionation of Cd, Cr, Cu, Fe, Mn, Pb, and Zn in shrimp aquaculture sludge from Selangor, Malaysia, using original (unmodified) and modified four-steps BCR (European Community Bureau of Reference, now known as the Standards Measurements and Testing Program) sequential extraction scheme. Step 2 of the unmodified BCR procedure (subsequently called Method A) involves treatment with 0.1 M hydroxylammonium chloride at pH 2, whereas 0.5 M hydroxylammonium chloride at pH 1.5 was used in the modified BCR procedure (subsequently called Method B). Metal analyses were carried out by flame atomic absorption spectrometry. A pseudo-total aqua-regia digest of BCR CRM 701 has also been undertaken for quality assurance purposes. The recovery of Method A for all metals studied ranges from 96.14% to 105.26%, while the recovery for Method B ranges from 95.94% to 122.40%. Our results reveal that Method A underestimated the proportion of metals bound to the easily reducible fraction except for copper. Therefore, the potential mobility of these elements is higher than others. Thus, to use this sludge as a fertilizer we have to first find a remediation for reduction of heavy metal contamination.     

Assessment of hospitalization and mortality from exposure to PM10 using AirQ modeling in Ilam,Iran

Environmental Science and Pollution Research - The aims of this study were to assess the health impact of PM10 on inhabitants and to investigate the trend of PM10 concentrations in Ilam, Iran, from...     

Temporospatial variation and health risk assessment of trihalomethanes (THMs) in drinking water (northwest Iran)

Environmental Science and Pollution Research - Trihalomethanes (THMs) are one of the most common classes of disinfection by-products. In this study, the temporospatial trends and health risks due...     

Mass transfer and bioremediation of aromatics from NAPL in a baffled roller bioreactor

A non-aqueous phase liquid (NAPL) containing dissolved naphthalene or phenol was used to simulate water insoluble contaminants which are produced during the processing of oil sands. Mass transfer and biodegradation of organic contaminants in the aqueous phase were studied in a baffled roller bioreactor. Mass transfer of both naphthalene and phenol from NAPL into the aqueous phase was completed in less than 60 min, by which time naphthalene reached its saturation concentration in the aqueous phase and phenol was completely transferred into the aqueous phase. Pseudomonas putida (ATCC 17484) was subsequently used in biodegradation experiments in the baffled bioreactor containing the model NAPL contaminant. The optimum loading of NAPL for biodegradation of naphthalene at 500 mg/L was found to be 40%. High biodegradation rates (136.4 mg/L h for naphthalene and 13.2 mg/L h for phenol based on the working volume of the bioreactor) were achieved. In the case of simultaneous biodegradation of naphthalene and phenol, the highest total biodegradation rate of 102.6 mg/L h was achieved.     

Changes in plasma taurine concentration during a period of heroin detoxification

Taurine is one of the most abundant sulpho-amino acids in the body. Hypertaurinemia has already been reported following different stress states. A previous study demonstrated a significant increase of serum taurine concentration in heroin addicts. Therefore, we hypothesized that taurine could be a possible biomarker of recovery during detoxification from opiates. For this purpose, 30 heroin addicts who went under the 5-day heroin detoxification process were recruited for the study. Three blood samples (5 mL each) were taken from each patient in the first, third, and fifth days. They were collected in heparinized glass tubes and after centrifuging, the plasma was separated and kept in the ?20°C freezer until analysis using a previously developed HPLC method with fluorescence detection. The data were statistically analyzed using the Student t-test and ANOVA. Plasma taurine concentration in addicts was significantly more than that of the healthy controls (p < 0.0001). However, there were no changes in the plasma taurine concentration in the addicts during the 5-day study period (p > 0.05). Therefore, we can conclude that the plasma taurine concentration could not be considered as a biomarker of recovery in a 5-day detoxification period of heroin addiction.     

Trophic transfer of CuO nanoparticles from brine shrimp (Artemia salina) nauplii to convict cichlid (Amatitlania nigrofasciata) larvae: uptake,accumulation and elimination

Environmental Science and Pollution Research - We investigated the trophic transfer potential of CuO-NPs from Artemia salina to Amatitlania nigrofasciata. The Cu uptake was investigated by exposure...     

Catalytic evaluation of promoted CeO2-ZrO2 by transition, alkali, and alkaline-earth metal oxides for diesel soot oxidation

Series of mixed metal oxides were synthesized by gel-combustion method and their catalytic activities for soot oxidation were investigated. The catalysts were M-Ce-Zr （M = Mn, Cu, Fe, K, Ba, Sr）, and χK-20Mn-Ce-Zr （χ= 0, 5, 10, 20）, they were characterized by XRD, SEM, TPR and BET surface area techniques. The results of soot temperature programmed oxidation （TPO） in an O2 oxidizing atmosphere indicate that K-Ce-Zr has the highest catalytic activity for soot oxidation under loose contact condition, due to enhancement of the soot and catalyst contacts. On the other hand, under a tight contact condition, Mn-Ce-Zr and Cu-Ce-Zr nano-composites have high activities for soot oxidation and lower the soot TPO peak temperatures by about 280 and 270℃, respectively, as compared to non-catalytic soot oxidation. Furthermore, the addition of up to 10 wt.% potassium oxides into Mn-Ce-Zr increases its catalytic activity and further reduces the soot TPO peak temperature by about 40℃ under loose contact condition.     

A simple and efficient multi-residue method based on QuEChERS for pesticides determination in palm oil by liquid chromatography time-of-flight mass spectrometry

In this study, a rapid, specific and sensitive multi-residue method based on acetonitrile extraction followed by dispersive solid-phase extraction (d-SPE) clean-up was implemented and validated for multi-class pesticide residues determination in palm oil for the first time. Liquid-liquid extraction followed by low-temperature precipitation procedure was evaluated in order to study the freezing-out clean-up efficiency to obtain high recovery yield and low co-extract fat residue in the final extract. For clean-up step, d-SPE was carried out using a combination of anhydrous magnesium sulphate (MgSO(4)), primary secondary amine, octadecyl (C(18)) and graphitized carbon black. Recovery study was performed at two concentration levels (10 and 100 ng g(-1)), yielding recovery rates between 74.52% and 97.1% with relative standard deviation values below 10% (n?=?6) except diuron. Detection and quantification limits were lower than 5 and 9 ng g(-1), respectively. In addition, soft matrix effects (≤±20%) were observed for most of the studied pesticides except malathion that indicated medium (20-50%) matrix effects. The proposed method was successfully applied to the analysis of suspected palm oil samples.     

Re-examining the water affordability: A comparison of alternative measures

Water affordability is determined by the percentage of income households that must allocate to municipal water services, while factoring in essential or basic needs water use. With the rise in water prices reported in most areas of the country along with somewhat stagnant income growth—a combination that suggests ceteris paribus—more of a household's disposable income is being spent on water services. This paper adds to the discussion in three ways. First, given the lack of a consistent definition for “affordability” and the subjective connotation associated with such a term, we develop and compare five different water expenditure ratios, including two different measures of water for essential needs, as well as measures for indoor, efficient, and actual water use. Second, because of the granularity of our data, we illustrate how such “affordability” measures can vary significantly within a water district and thus highlight how using district- or county-level income measures can mask the degree to which affordability is an issue for households living in low-income block groups. Our results indicate that the choice of income measure and type of water service use can influence affordability measures substantially.