Skin prick test reactivity in allergic rhinitis patients to airborne pollens

The aim was to investigate the impact of atmospheric pollen in determining allergic rhinitis. It was conducted with 130 patients with allergic rhinitis in three different sites in Eskisehir, Turkey, in 2000-2001, using a gravimetric method with a Durham sampler. Skin prick test results, the symptoms of patients and their findings all confirmed the presence of allergic reactions to pollen allergens in the patients observed. During the period, a total of 47,082 pollen grains/cm(2) belonging to 45 taxa were recorded. Of the total pollen grains, 81.0% were arboreal and 18% non-arboreal. The majority of the investigated pollen grains were from Pinaceae, Salix spp., Chenopodiaceae/Amaranthaceae, Cupressaceae and Poaceae. Pollen concentrations reached the highest level in May (54.36%). The pollen allergens provoking severe sensitization were grasscereal mixtures (58.5%), followed by arboreals (33.8%). All patients (100.0%) were sensitive to grass. This study emphasizes the significance of determining the types and concentrations of pollen with a view to comparing changes in highly concentrated allergens.     

Solid-phase extraction of Mn(II) and slurry analysis of the sorbent by electrothermal atomic absorption spectrometry

In this study, a challenging preconcentration/separation method based on the sorption of manganese on ethylene glycol dimethacrylatemethacrylic acid copolymer (EGDMA-MA) treated with ammonium pyrrolidine dithiocarbamate (APDC) and its slurry analysis by electrothermal atomic absorption spectrometry was described. Optimum conditions for quantitative sorption, as well as for preparing a homogeneous and stable slurry were investigated. A 100-fold enrichment factor could be reached. The analyte element in certified sea-water and bovine-liver samples were determined in the range of 95% confidence level. The proposed technique is fast, simple, and the risk of contamination is low. The limit of detection of the method for manganese in the slurry of the blank subjected to the proposed procedure was 0.07 μg L^?1 (3δ, N:10) corresponding to 0.56 μg kg^?1 slurry.     

Removal of phenol by activated carbons prepared from palm oil mill effluent sludge

The study was attempted to produce activated carbons from palm oil mill effluent （POME） sludge. The adsorption capacity of the activated carbons produced was evaluated in aqueous solution of phenol. Two types of activation were followed, namely, thermal activation at 300, 500 and 800%, and physical activation at 150% （boiling treatment）. A control （raw POME sludge） was used to compare the adsorption capacity of the activated carbons produced. The results indicated that the activation temperature of 800℃ showed maximum absorption capacity by the activated carbon （POME 800） in aqueous solution of phenol. Batch adsorption studies showed an equilibrium time of 6 h for the activated carbon of POME 800. It was observed that the adsorption capacity was higher at lower values ofpH （2--3） and higher value of initial concentration of phenol （200--300 mg/L）, The equilibrium data were fitted by the Langmuir and Freundlich adsorption isotherms. The adsorption of phenol onto the activated carbon POME 800 was studied in terms of pseudo-first and second order kinetics to predict the rate constant and equilibrium capacity with the effect of initial phenol concentrations. The rate of adsorption was found to be better correlation for the pseudo-second order kinetics compared to the first order kinetics.     

Monitoring The Turbidity and Surface Temperature Changes and Effects of the 17 August 1999 Earthquake in the İzmİt Gulf,Turkey by the Landsat TM/ETM Data

The temporal turbidity and surface temperature changes and effects of the 17 August 1999 earthquake in the İzmit Gulf, Turkey have been investigated using Landsat TM/ETM data. The gulf is in the Mediterranean–Black Sea transition climatic zone and is partially surrounded by green vegetation cover and degraded and densely urbanized-industrialized areas. Landsat TM/ETM data acquired in 1990–1999 confirms increase in turbidity. Turbidity is always low in the southern part and high in the northern part of the gulf, because the more urbanized and industrialized areas are located in the northern part. The Landsat-7 ETM data acquired in the same year (1999) shows seasonal changes in turbidity. Moreover, the two high turbidity and surface temperature anomalies, one of which is parallel to the 17 August 1999 earthquake surface rupture (east–west) and the other which is in the northwest–southeast direction were mapped from Landsat-5 TM data acquired the day (18.08.1999) following the earthquake in the east end of the gulf. On the basis of turbidity implying the sea bottom movement, it is possible to state that a second rupture in the northwest and southeast direction could have occurred at the sea bottom during the earthquake. The distribution of the seismicity centers and the orientation of the lineaments in the area support this finding.     

Trace element biomonitoring by leaves of Populus nigra L. from Western Anatolia, Turkey

The West Anatolian Region is one of the most important areas for industrialization, population density and traffic in Turkey. Therefore, the leaves of Populus nigra L. (Salicaceae), which are used as biomonitor to investigate the levels of the trace elements Cd, Pb, Fe, Zn and Cu, were sampled at 30 locations having different pollution levels in the region. The concentrations of elements were determined by atomic absorption spectrometry. The samples were collected at both reference and contaminated locations where iron was found as the priority element. The strong association between a gradient of contamination and concentration in all samples tested indicates that they are reflecting well the environmental changes, and that they appear as appropriate biological indicators of heavy metal contamination.     

Effects of cold stratification on germination rate and percentage of caper (Capparis ovata Desf.) seeds

Caper is an important plant because of its high adaptability to marginal agriculture fields that are not suitable for agricultural crops. Different parts of caper such as roots, fruits, flowers and buds can be used to increase the inhabitant's income. The goal of this research is to determine germination rate and percentage of caper according to different duration of cold stratification (10, 20, 30, 40, 50 and 60 days) treatments. Cold stratification procedures under greenhouse condition were applied for eliminating seed dormancy to find the most suitable germination conditions because the presence of seed dormancy causes difficulties in seedling production. The seed germination started and stopped 21 and 57 days after sowing, respectively. While the highest germination percentage (46.6%) was obtained in seeds that were cold stratified for 60 days, the lowest germination percentage (3.6 7%) was determined in control seeds.     

Optimization of activated carbon production from empty fruit bunch fibers in one-step steam pyrolysis for cadmium removal from aqueous solution

The fast growth of the palm oil industry in Malaysia is associated with various waste products, namely the empty fruit bunches (EFB), which have a negative impact on the environment. Therefore, these wastes were utilized as a cheap raw material for the production of activated carbon (AC) with less energy consumption. One-step steam pyrolysis was used to produce AC from oil palm empty fruit bunch fibers (EFBF) by varying the operating parameters of temperature, steam flow rate, and activation time using two-level full factorial experimental design (FFD). Ten samples of AC were prepared and the optimized production conditions were chosen based on the ability to adsorb and remove cadmium. Physical activation comprised of carbonization for 30 min using nitrogen gas (N₂), followed by activation with steam at different flow rates (2.0, 3.0, and 4.0 ml/min), temperatures (600, 750, and 900°C) and times (15, 30, and 45 min). The AC sample produced at an activation temperature of 900°C with a steam flow rate of 2.0 ml/min and activation time of 15 min was selected as the best adsorbent with a total yield of 21.7%. It had adsorbed more than 97% of total cadmium from aqueous solution within 2 min of the contact time. Characterization of EFBF-based AC by SEM and BET surface area analysis had shown a good-quality adsorbent with highly active sites and well-developed pores with BET surface area of 635.16 m²/g. Experimental results indicated that the prepared AC from EFBF provide a promising solution in water and wastewater treatment.     

Activated carbons derived from oil palm empty-fruit bunches： Application to environmental problems

Activated carbons derived from oil palm empty fruit bunches （EFB） were investigated to find the suitability of its application for removal of phenol in aqueous solution through adsorption process, Two types of activation namely; thermal activation at 300, 500 and 800℃and physical activation at 150℃ （boiling treatment） were used for the production of the activated carbons. A control （untreated EFB） was used to compare the adsorption capacity of the activated carbons produced from these processes. The results indicated that the activated carbon derived at the temperature of 800℃ showed maximum absorption capacity in the aqueous solution of phenol. Batch adsorption studies showed an equilibrium time of 6 h for the activated carbon at 800℃. It was observed that the adsorption capacity was higher at lower values of pH （2-3） and higher value of initial concentration of phenol （200-300 mg/L）. The equilibrium data fitted better with the Freundlich adsorption isotherm compared to the Langmuir. Kinetic studies of phenol adsorption onto activated carbons were also studied to evaluate the adsorption rate. The estimated cost for production of activated carbon from EFB was shown in lower price （USD 0.50/kg of activated carbon） compared the activated carbon from other sources and processes.     

Assessment of heavy metal pollution of seston from freshwater resources poured into the Northeast Mediterranean region

This study was carried out to determine the accumulation levels of heavy metals (Zn, Cd, Pb, Cu, Fe, Cr) in seston to three different freshwater resources poured into the Iskenderun Bay. Seasonal averages of physico-chemical parameters measured at stations, Arsuz Stream, Payas Stream, and Ceyhan River, are classified as Class III—contaminated water according to the temperature parameter in the summer. Payas Stream has been determined to be Class III—polluted water according to pH parameters during the summer season. Ceyhan River was found to be Class III—contaminated water according to the dissolved oxygen parameter in the autumn season. Heavy metal accumulation levels in the seston were determined Fe?>?Cr?>?Zn?>?Cu?>?Pb?>?Cd in Arsuz Stream, Fe?>?Zn?>?Pb?>?Cr?>?Cu?>?Cd in Payas Stream, and Fe?>?Zn?>?Cr?>?Cu?>?Pb?>?Cd in Ceyhan River. The results in this study showed that high accumulation levels in seston were determined for Fe while low accumulation levels for Cd.