Sorption of polar and nonpolar aromatic compounds to four surface soils of eastern China

Improved predictions on the fate of organic pollutants in surface environments require a better understanding of the underlying sorption mechanisms that control their uptake by soils. In this study, we monitored sorption of nine aromatic compounds with varying physicochemical properties (hydrophobicity, electron-donor/acceptor ability and polarity), including two polycyclic aromatic hydrocarbons, two chlorobenzenes, two nitroaromatic compounds, dichlobenil, carbaryl and 2,4-dichlorophenol in aqueous suspension of four surface soils of eastern China. The tested soils were characterized with respect to organic carbon (OC) content, black carbon content, mineralogy, morphology and size fraction to assess the role of the diverse soil characteristics in sorption. The results of this study show that not only the solute hydrophobicity and the OC content of soil are important to the retention of organic pollutants, but also the solute molecular structure and the soil nature.     

Formation and speciation of disinfection byproducts during chlor(am)ination of aquarium seawater

The chemistry associated with the disinfection of aquarium seawater is more complicated than that of freshwater, therefore limited information is available on the formation and speciation of disinfection byproducts(DBPs) in marine aquaria. In this study, the effects of organic precursors, bromide(Br-) and pre-ozonation on the formation and speciation of several typical classes of DBPs, including trihalomethanes(THM4), haloacetic acids(HAAs),iodinated trihalomethanes(I-THMs), and haloacetamides(HAc Ams), were investigated during the chlorination/chloramination of aquarium seawater. Results indicate that with an increase in dissolved organic carbon concentration from 4.5 to 9.4 mg/L, the concentrations of THM4 and HAAs increased by 3.2–7.8 times under chlorination and by 1.1–2.3 times under chloramination. An increase in Br-concentration from 3 to 68 mg/L generally enhanced the formation of THM4, I-THMs and HAc Ams and increased the bromine substitution factors of all studied DBPs as well, whereas it impacted insignificantly on the yield of HAAs. Pre-ozonation with 1 mg/L O3 dose substantially reduced the formation of all studied DBPs in the subsequent chlorination and I-THMs in the subsequent chloramination. Because chloramination produces much lower amounts of DBPs than chlorination, it tends to be more suitable for disinfection of aquarium seawater.     

游乐设施危险源、损伤、失效和故障概念辨析

针对游乐设施行业危险源、损伤、失效和故障四个概念的认知差异,通过研究相关领域这四个概念定义内涵及外延,结合游乐设施安全保障要求高、人-机-环交互频繁、运行工况复杂的特点,重新定义游乐设施这四个概念,辨析相互之间的逻辑关系,并结合游乐设施事故案例进行解析.结果表明:新定义对游乐设施危险源、失效、损伤和故障之间的关系阐述更加清晰准确,为后续的风险评价奠定良好基础.     

花卉废物和牛粪联合堆肥中的氮迁移

以花卉废物和牛粪为原料,进行了温度反馈的通气量控制联合堆肥中的氮迁移中试研究.采用自制的静态好氧床进行一次发酵,过程控制采用温度反馈通气量控制方法,发酵周期20d;采用周期性翻堆进行物料二次腐熟,腐熟周期40d.研究了堆肥过程中总氮、有机氮、无机氮、氨氮、硝氮等氮素形态转化随时间的变化特征及温度反馈的通气量控制对氮迁移的影响.结果表明:堆肥初期的氨化作用和反硝化作用显著,氮素总量损失累计达41.98%,其中主要是有机氮的损失,99.95%的氮损失发生在一次发酵阶段;氮素损失主要是在pH和温度较高条件下的氨气大量挥发造成的.对通风进行有效控制、提高物料C/N及添加酸性物质有望减少N损失.对于C/N较低,硝态氮含量较高的物料堆肥,NH₄⁺-N≤0.04%、NH₄/NO₃≤0.16不能作为腐熟度指标.     

城市公园绿化养护方式探究

为提升城市公园绿化养护水平,介绍了城市公园绿化养护方式,包括公园管理方自行管养,社会化承包绿化管养,部分要素社会化外包.对比了各类养护方式的优劣势,提出公园绿化养护工作建议:重视日常管理,提高专业素质,引导审美素养,实行一园一策模式,为居民增加休憩舒适度,给游客带来更好的游览体验,使公园呈现生机勃勃的景象.     

基于景观中性模型的不同竞争力外来种入侵对栖息地毁坏的响应

栖息地毁坏和生物入侵被认为是全球物种多样性的两大威胁,也是当前研究的热点。同时,两者的共同作用将比单独作用所带来的物种多样性丧失更大。本文基于竞争-扩散均衡机制,考虑了外来种的不同竞争力,结合景观中性模型和元胞自动机模型,模拟了外来种入侵对栖息地毁坏（栖息地破碎和面积丧失）的响应。研究结果表明：1）外来种入侵成功将首先威胁竞争力与其相邻的弱物种;2）栖息地毁坏与种间竞争共同决定着外来种入侵的成功与否。当栖息地破碎促进了与外来种竞争力相邻的本地强物种时,将会抑制入侵;当其抑制了与外来种竞争力相邻的本地强物种时,则会促进入侵。当栖息地丧失促进了外来种相邻的本地强物种时,将会抑制入侵;当栖息地丧失抑制了外来种相邻的本地强物种,将一定程度地促进入侵,但随着丧失面积的增加,则转为抑制。因此,为了抑制不同竞争力的外来种入侵,应采取不同的栖息地保护策略,并保护和促进其竞争力相邻的本地强物种。     

Ag3PO4掺杂g-C3N4催化剂的制备及其可见光催化降解含碘类造影剂性能

以沉淀-回流方法于磷酸银(Ag₃PO₄)中掺杂氮化碳(g-C₃N₄)制备新型复合光催化剂,同时采用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射图(XRD)等手段对合成催化剂的形态特征、晶型结构以及物理化学性质进行表征.以碘帕醇(IPM)作为目标污染物,通过改变催化剂的使用条件考察了氙灯光照下催化剂对水溶液中含碘类造影剂(ICMs)的光催化降解性能,并且分析了催化氧化过程中可能的污染物降解途径以及转化产物.结果表明,合成后的催化剂结构稳定,相对于使用单一催化剂(Ag₃PO₄或g-C₃N₄)条件下,复合催化剂对ICMs的光降解性能都得到大幅度提升,经条件优化后,确定Ag₃PO₄与g-C₃N₄的质量比例为0.15∶0.1时降解效果最佳,但不可超过0.2∶0.1,且降解性能与催化剂的投加浓度呈正相关,浓度在0.75 ...     

Method and mechanism of chromium removal from soil: a systematic review

Environmental Science and Pollution Research - Heavy metal pollution has increasingly affected human life, and the treatment of heavy metal pollution, especially chromium pollution, is still a...     

Formation control of bromate and trihalomethanes during ozonation of bromide-containing water with chemical addition: Hydrogen peroxide or ammonia?

To ensure the safety of drinking water, ozone (O₃) has been extensively applied in drinking water treatment plants to further remove natural organic matter (NOM). However, the surface water and groundwater near the coastal areas often contain high concentrations of bromide ion (Br^?). Considering the risk of bromate (BrO₃^?) formation in ozonation of the sand-filtered water, the inhibitory efficiencies of hydrogen peroxide (H₂O₂) and ammonia (NH₃) on BrO₃^? formation during ozonation process were compared. The addition of H₂O₂ effectively inhibited BrO₃^? formation at an initial Br^? concentration amended to 350 µg/L. The inhibition efficiencies reached 59.6 and 100% when the mass ratio of H₂O₂/O₃ was 0.25 and > 0.5, respectively. The UV₂₅₄ and total organic carbon (TOC) also decreased after adding H₂O₂, while the formation potential of trihalomethanes (THMsFP) increased especially in subsequent chlorination process at a low dose of H₂O₂. To control the formation of both BrO₃^? and THMs, a relatively large dose of O₃ and a high ratio of H₂O₂/O₃were generally needed. NH₃ addition inhibited BrO₃^? formation when the background ammonia nitrogen (NH₃N) concentration was low. There was no significant correlation between BrO₃^? inhibition efficiency and NH₃ dose, and a small amount of NH₃N (0.2 mg/L) could obviously inhibit BrO₃^? formation. The oxidation of NOM seemed unaffected by NH₃ addition, and the structure of NOM reflected by synchronous fluorescence (SF) scanning remained almost unchanged before and after adding NH₃. Considering the formation of BrO₃^? and THMs, the optimal dose of NH₃ was suggested to be 0.5 mg/L.     

紫外高级氧化工艺降解水溶液中的人工甜味剂

人工甜味剂（ASs）作为一类新兴污染物在世界范围内的各种水体中被广泛检出,本文选取具有代表性的糖精（SAC）作为研究对象,探讨了紫外/过氧化氢（UV/H₂O₂）和UV/过硫酸盐（PS）两种高级氧化工艺（AOPs）降解SAC的动力学、影响因素、矿化率、转化产物和降解机制.结果表明：单独的UV、PS和H₂O₂对SAC的去除效果有限（去除率<5%）,UV/H₂O₂和UV/PS工艺对SAC的去除效果良好（去除率>99%）且降解符合伪一阶动力学,速率分别为0.38 min^-1和0.09 min^-1.降低溶液pH值、增大PS浓度均可促进SAC降解;但随着H₂O₂浓度的升高,SAC降解效率先增加后减小.相比UV/PS工艺,UV/H₂O₂工艺降解SAC的矿化率更高（可达43%）.产物鉴定结果表明,两种UV-AOPs氧化降解SAC均会生成开环产物,表明反应会破坏SAC分子中的N—S结构.此外,UV/H₂O₂工艺更易生成羟基化产物,二聚体产物仅在UV/PS工艺中被检测到.