Ergonomic assessment of selected workstations on a merchant ship

This study describes some key ergonomic factors within the engine room, navigation bridge and other locations of a merchant ship. Ergonomic assessments were carried out on a crew of a merchant ship. The study examines the importance of factors such as noise, vibration, heat radiation (in machinery areas), psychological stress and ergonomics of the physical arrangement of the navigation bridge. It also addresses the effect of working in confined areas for a long duration and the need to process large amounts of data, decision-making and the influence of specific operating conditions in different areas of a ship. This study includes analysis of workstations, working methods and the burden of environmental factors as well as a discussion of specific marine environmental conditions such as confined working and leisure spaces, long-term family and sociocultural separation, frequent changes in climate and time zones, and temporary physical overload and long-term psychological burdens.     

Response of leaf and fine roots proteomes of Salix viminalis L. to growth on Cr-rich tannery waste

Environmental Science and Pollution Research - The tannery industry is a major source of anthropogenic chromium (Cr) contamination due to the large amounts of solid waste produced and its...     

The impact of pesticides on oxidative stress level in human organism and their activity as an endocrine disruptor

Pesticides cause serious environmental and health problems both to humans and animals. The aim of this review is to discuss selected herbicides and fungicides regarding their mode of action and their influence on basic oxidative stress parameters and endocrine disruption properties tested in selected cell cultures in vitro. Because of numerous difficulties which animal studies are subject to, cell cultures are an excellent experimental model reflecting human exposure to different pesticides through all relevant routes. This experimental model can be used to monitor aggregate and cumulative pesticide exposures.     

Uncertainty aspects in process safety analysis

Uncertainties of input data as well as of simulation models used in process safety analysis (PSA) are key issues in the application of risk analysis results. Mostly, it is connected with an incomplete and uncertain identification of representative accident scenario (RAS) and other vague and ambiguous information required for the assessment of particular elements of risk, especially for determination of frequency as well as severity of the consequences of RAS. The authors discuss and present the sources and types of uncertainties encountered in PSA and also methods to deal with them. There are different approaches to improve such analysis including sensitivity analysis, expert method, statistics and fuzzy logic. Statistical approach uses probability distribution of the input data and fuzzy logic approach uses fuzzy sets. This paper undertakes the fuzzy approach and presents a proposal for fuzzy risk assessment. It consists of a combination of traditional part, where methods within the process hazard analysis (PHA) are used, and “fuzzy part”, applied quantitatively, where fuzzy logic system (FLS) is involved. It concerns frequency, severity of the consequences of RAS and risk evaluation. In addition, a new element called risk correction index (RCI) is introduced to take into account uncertainty concerned with the identification of RAS. The preliminary tests confirmed that the final results on risk index are more precisely and realistically determined.     

Removal of an anionic dye (Acid Blue 92) by coagulation–flocculation using chitosan

Chitosan (a biopolymer) is an aminopolysaccharide that can be used for the treatment of colored solutions by coagulation–flocculation (as an alternative to more conventional processes such as sorption). Acid Blue 92 (a sulfonic dye) was selected as a model dye for verifying chitosan's ability to treat textile wastewater. A preliminary experiment demonstrated that chitosan was more efficient at color removal in tap water than in demineralized water, and that a substantially lower concentration of chitosan could be used with tap water. Dye removal reached up to 99% under optimum concentration; i.e., in terms of the acidic solutions and the stoichiometric ratio between the amine groups of the biopolymer and the sulfonic groups in the dye. The flocs were recovered and the dye was efficiently removed using alkaline solutions (0.001–1 M NaOH solutions) and the biopolymer, re-dissolved in acetic acid solution, was reused in a further treatment cycle.     

Remobilization of polychlorinated biphenyls from sediment and its consequences for their transport in river waters

A laboratory experiment was performed to examine the remobilization of indicator polychlorinated biphenyls (iPCBs) from sediments and its results were applied to the real-world data for explaining the transport of PCBs in river. Seven PCB concentrations were determined in three series of model water–sediment systems (3 g of river sediment, three different volumes of distilled water (0.5, 0.25, and 0.15 ml), and 5 mg of biocide) after 11 days of incubation. Solid-phase extraction was used for separation of analytes from the aqueous phase and solvent extraction for isolation of analytes from the sediments, respectively. The extracts were analyzed for individual iPCB congeners using gas chromatography–mass spectrometry method. For each series of the experiment, the concentrations of PCBs in aqueous phase were similar. The average sediment/water partition coefficient value was 10⁴?l/kg. The solubility of individual PCB congeners in water did not influence the desorption of PCBs from the sediment. Although the dominant form of PCBs in a water–sediment system occurs as suspended and colloidal fractions, these compounds are transported mostly in a dissolved form. Suspended and colloidal matter is a major sink for PCBs in low-energy aquatic environments. In contrast, the dissolved PCBs are readily transported in running waters. The mobilization of PCBs from sediments to aqueous phase, with respect to their solubility in water, seems to be limited, thus reducing the risk of secondary pollution.     

Sources and distributions of Cs, Pu, Pu radionuclides in the north-western Barents Sea

Sediment deposits are the ultimate sink for anthropogenic radionuclides entering the marine environment. The major sources of anthropogenic radionuclides to the Barents Sea are fallout from nuclear weapons tests, long range transport from other seas, and river and non-point freshwater supplies. In this study we investigated activity concentrations, ratios, and inventories of the anthropogenic radionuclides, ¹³⁷Cs, ²³⁸Pu, ^239,240Pu in dated sediment cores collected along a north-south transect in the northwestern Barents Sea. The data were used to evaluate the influence of different sources on the derived spatial and temporal patterns of anthropogenic radionuclides in seafloor sediment deposits. Activity concentrations of ¹³⁷Cs ranged from <0.1 Bq/kg to 10.5 Bq/kg while ^239,240Pu ranged from <0.01 Bq/kg to 2.74 Bq/kg and ²³⁸Pu activity concentrations ranged from <0.01 Bq/kg to 0.22 Bq/kg. Total inventories of ¹³⁷Cs ranged from 29.5 ± 1.5 Bq/m² to 152.7 ± 5.6 Bq/m² and for ^239,240Pu inventories (6 sediment layers only) ranged from 9.5 ± 0.3 Bq/m² to 29.7 ± 0.4 Bq/m². Source contributions varied among stations and between the investigated radionuclides. The ²³⁸Pu/^239,240Pu ratios up to 0.18 indicate discharges from nuclear fuel reprocessing plants as a main contributor of plutonium. Based on ²³⁸Pu/^239,240Pu ratio, it was calculated that up to 19-27% of plutonium is supplied from sources other than atmospheric global fallout. Taking into account Atlantic current flow trajectories and that both activity concentrations and inventories of plutonium negatively correlate with latitude, Sellafield is a major source for the Barents Sea. Concentrations and inventories of ¹³⁷Cs correlate positively with latitude and negatively with distance from the Svalbard archipelago. The ¹³⁷Cs concentrations are highest in an area of intensive melting of sea ice formed along the Siberian coast. Thus, sea ice and supplies from Svalbard may be important source of ¹³⁷Cs to the Barents Sea seafloor.     

The health risk assessment of organochlorine pesticides in smoked fish products available in Szczecin,Poland

The aim of this study was to determine the concentration of organochlorine pesticides [HCH and isomers (α, β, γ), aldrin, dieldrin, endrin, heptachlor and heptachlor epoxide and DDT and its metabolites (op’-DDD, pp’-DDD, op’-DDT, pp’-DDE, pp’-DDT] in smoked fish. Analysis was made of 12 typical smoked fish products that are the most popular among customers from the city of Szczecin, Poland. Pesticide residues were found in all samples of smoked fish. The smoked sprat and cold-smoked Baltic salmon were the most contaminated smoked fish products in terms of chlorine pesticides. The sum of DDT metabolites ranged from 1.48 (smoked mackerel) to 35.53 ng/g wet weight (smoked sprat), with the lowest concentrations found for op’-DDT and the highest for pp’-DDE. The level of heptachlor epoxide isomer B was low and ranged from 0.06 ± 0.01 (smoked eel) to 0.27 ± 0.07 ng/g w.w. (smoked sprat). The content of heptachlor was 0.48–1.99 ng/g w.w. Concentration of endrin was higher compared to other pesticides, ranged from 1.50 (cold-smoked salmon fillet) to 16.84 ng/g w.w (hot-smoked warehou). The contamination of smoked products was significantly low and poses no risk to the health of consumers provided that they eat a diverse diet. The concentration of organochlorine pesticides in the analysed products was below the standards accepted in European countries.     

Assessment of honey contamination with polycyclic aromatic hydrocarbons

The aim of this study was to assess honey contamination by polycyclic aromatic hydrocarbons. Six species of honey were examined, as well as rape blossom and soil from villages P?czerzyno and Przybys?aw in West Pomerania, Poland. The instrumental analysis was performed using a HP 6890 gas chromatograph coupled to a HP 5973 mass spectrometer with selected ion monitoring (SIM). Quantification was done by gas chromatography-mass spectrometry (GC-MS) using perdeuterated internal standards. Both soil samples showed high levels of all 23 PAHs, whereas honey contained mostly non-carcinogenic PAHs of low molecular weight. The most contaminated honey from P?czerzyno contained 0.24 μg kg-1 benzo[a]pyrene. Moreover, despite low contamination of honey, a positive correlation was found between PAH content in honey, blossom and soil.     

Kitchen waste valorization through a mild-temperature pretreatment to enhance biogas production and fermentability: Kinetics study in mesophilic and thermophilic regimen

Biowaste valorization through anaerobic digestion is an attractive option to achieve both climate protection goals and renewable energy production. In this paper, a complete set of batch trials was carried out on kitchen waste to investigate the effects of mild thermal pretreatment, temperature regimen and substrate/inoculum ratio. Thermal pretreatment was effective in the solubilisation of macromolecular fractions, particularly carbohydrates. The ability of the theoretical methodologies in estimating hydrogen and methane yields of complex substrates was evaluated by comparing the experimental results with the theoretical values. Despite the single batch configuration, a significant initial hydrogen production was observed, prior to methane yield. Main pretreatment effect was the gain in hydrogen production; the extent was highly variable according to the other parameters values. High hydrogen yields, up to 113 mL H2/g VSfed, were related to the prompt transformation of soluble sugars. Thermophilic regimen resulted, as expected, in faster digestions (up to 78 mL CH₄/gVS/day) and sorted out pH inhibition. The relatively low methane yields (342–398 mL CH₄/g VS_fed) were the result of the consistent lignocellulosic content and low lipid content. Thermal pretreatment proved to be a promising option for the enhancement of hydrogen production in food waste dark fermentation.