Influence of preparation method on structural,optical, magnetic,and adsorption properties of nano-NiFe2O4

Nickel ferrite (NiFe₂O₄) nanoparticles are prepared through different routes (microwave, co-precipitation, and pyrolysis) and tested for water purification applications through adsorption removal of an acid red dye B as a model organic pollutant. The characterizations of the prepared samples were done using XRD, FT-IR, SEM, TEM, BET, UV-Vis absorbance, Raman spectrum, and vibrating sample magnetometer (VSM). All samples showed an inverse spinel crystal structure. The obtained results pointed out to the effect of the synthetic route on the morphology, particle size, optical, and magnetic properties of the prepared ferrites. Magnetic measurements showed super-paramagnetic behavior for all samples. The magnetic saturation (M_s) of the sample prepared by pyrolysis, was found to possess the highest saturation value, 34.8 emu/g. Adsorption experiments were performed under the change in several parameters, such as pH, adsorbent dosage, and initial dye concentration. A dye removal percentage of 99% was reached under the optimum state. The isothermal adsorption of the acid red dye was investigated using several models, in which the experimental data could be best described by the Freundlich model. Several kinetic and equilibrium models were inspected by linear regression analysis and showed best fitting for the adsorption data through pseudo-second-order model. The calculated thermodynamic parameters indicated that the adsorption of acid red dye onto all the ferrite samples is a spontaneous and endothermic physical adsorption process.

     

The COVID-19 pandemic: prediction study based on machine learning models

Environmental Science and Pollution Research - COVID-19 was first discovered in Wuhan, China in December 2019. It is one of the worst pandemics in human history. Recent studies reported that...     

Brominated flame retardants in dust from UK cars--within-vehicle spatial variability, evidence for degradation and exposure implications

Polybrominated diphenyl ethers (PBDEs), hexabromocyclododecanes (HBCDs), and tetrabromobiphenol-A (TBBP-A) were measured in a preliminary study of dust from passenger cabins and trunks of 14 UK cars. Concentrations in cabin dust of HBCDs, TBBP-A, and BDEs 47, 85, 99, 100, 153, 154, 183, 196, 197, 202, 203, 206, 207, 208, and 209 exceeded significantly (p < 0.05) those in trunk dust. Sampling cabin dust thus appears to provide a more accurate indicator of human exposure via car dust ingestion than trunk dust. Elevated cabin concentrations are consistent with greater in-cabin use of BFRs. In five cars, while no significant differences (p > 0.05) in concentrations of HBCDs and most PBDEs were detected in dust sampled from four different seating areas; concentrations of TBBP-A and of PBDEs 154, 206, 207, 208, and 209 were significantly higher (p < 0.05) in dust sampled in the front seats. Possible photodebromination of BDE-209 was indicated by significantly higher (p < 0.05) concentrations of BDE-202 in cabin dust. In-vehicle exposure via dust ingestion to PBDEs, HBCDs and TBBP-A exceeded that via inhalation. Comparison with overall exposure via diet, dust ingestion, and inhalation shows while in-vehicle exposure is a minor contributor to overall exposure to BDE-99, ΣHBCDs, and TBBP-A, it is a significant pathway for BDE-209.     

Could curcumin ameliorate titanium dioxide nanoparticles effect on the heart? A histopathological,immunohistochemical, and genotoxic study

Environmental Science and Pollution Research - The evaluation of the toxicological effects of titanium dioxide nanoparticles (TiO2NPs) is increasingly important due to their growing occupational...     

Chemistry of the postpharyngeal gland secretion and its implication for the phylogeny of IberianCataglyphis species (Hymenoptera: Formicidae)

Summary A comparative morphological and chemical study of six endemic species ofCataglyphis from the Iberian Peninsula:C. ibericus, C. rosenhaueri, C. hispanicus, C. humeya, C. velox andC. floricola and the Moroccan speciesC. bombycinus is described. The morphological study relied primarily on genitalia characteristics, whereas the chemical study concentrated on the postpharyngeal gland constituents. Cladograms based on the morphological and chemical data were performed using Ward's method. The dendrogram based on morphological features revealed that the IberianCataglyphis can be classified into three species groupsalbicans, altisquamis andemmae. The same pattern occurred when the dimethylalkanes constituents of the postpharyngeal gland were utilised as character states, with a slight displacement of species within thealtisquamis group. However, when the complete hydrocarbon blend was utilised major discrepancies in the dendrograms occurred.Cataglyphis velox proved to be very similar toC. bombycinus, whereasC. floricola clustered with the other two species of thealtisquamis group. Based on the geographical distribution and paleontological data (Tinaut 1993) it is assumed thatC. floricola recently invaded the Iberian Peninsula. Based on the chemical findings we postulate that chemical character displacement occurred inC. floricola as a result of its sympatry withC. velox after the former colonized the Iberian Peninsula. We further discuss the possible reason for the different dendrograms obtained when only the dimethylalkanes are considered and its implication for the communicative role of the postpharyngeal gland secretion in these ants.     

Organochlorines and PCBs in Tilapia zillii from Lake El-Manzala,Egypt

Abstract

The mercury content has been determined in samples of fumarolic gases, phreatic waters, soil and vegetation collected at Vulcano, Aeolian Islands, Italy. Volcanic activity is demonstrated as a source of natural mercury pollution whose extent has been evaluated here by studying the contribution of different components of the surface environment. The possible influences for living organisms are examined.     

She Came, She Saw, She Sowed: Re-negotiating Gender-Responsive Priorities for Effective Development of Agricultural Biotechnology in Sub-Saharan Africa

In this paper, we argue for the importance of incorporating a gendered perspective for the effective development of sustainable agricultural biotechnology systems in sub-Saharan Africa. Priority setting for agricultural policy and project development requires attention to gender issues specific to the demands of agricultural biotechnology. This is essential for successfully addressing food security and poverty reduction in sub-Saharan Africa (SSA). There has been a great deal of debate and literature on the implications of gender in agricultural development and policy. However, the implications of gender in agricultural biotechnology and have received relatively less attention, especially in SSA. Based on interviews with key stakeholders in agricultural biotechnology across SSA, review of pertinent literature and field observations, we have found that incorporating a gendered perspective is critical for the sustainable development of agricultural biotechnology and requires attention in five areas: the inclusion of women, particularly women farmers, in decision-making around biotech/genetically modified (GM) crop and trait selection; equal representation of women as men in education for agricultural science and in agricultural biotechnology research and development professions; greater involvement of women in extension services and farmers’ associations for successful delivery of information about biotech crops equality between men and women in access to resources for biotech/GM crop cultivation; and increased control for women farmers over biotech/GM crop management and income generation. We explain the consequences of failing to include such gender-responsive considerations into priority setting for agricultural biotechnology development and policy in SSA and provide recommendations for how policy makers and project partners of development initiatives can avoid such oversights.     

Acidic bioleaching of heavy metals from sewage sludge

The overall objective of this study was to evaluate the use of controlled bio-acidification prior to land application as a decontamination process to remove heavy metals from sludge. The sulfur-oxidizing bacteria were naturally available in the sludge samples and were activated by providing sulfur and aeration at 28°C–30°C. Activation resulted in bio-acidification to pH 2 within 5–11 days. Successive inoculation of fresh sludges with 5% acidified samples reduced the acidification time to 2–3 days in most samples. Bio-acidification resulted in dissolving significant quantities of heavy metals from all sludge types tested. The maximum solubilization results were: 86%–97% for Ni; 48%–98% for Pb; 26%–71% for Cr; 18%–91% for Zn; 16%–90% for Cu; 7%–60% for Cd. Limited metal solubilization results were observed in the various control samples that accompanied the bio-acidified samples. The leaching results in the control samples were limited to 2%–19% for Ni, 0%–7% for Pb, 0%–5% for Cr, 0.3%–4% for Zn, 0.2%–4% for Cu and 0%–3% for Cd. The results confirmed that Ni and Pb were the easiest metals to dissolve from the various sludge types. On the other hand, the lowest solubilization results were observed for Cu and Cd, and moderate solubilization results were achieved for Cr. The bio-acidification process resulted in moderate gains in terms of improving the suitability of tested sludges for land application. Received: April 19, 1999 / Accepted: November 4, 1999     

Causes of variability in concentrations and diastereomer patterns of hexabromocyclododecanes in indoor dust

The temporal evolution of concentrations of α-, β-, and γ-hexabromocyclododecanes (HBCDs), and pentabromocyclododecenes (PBCDs — degradation products of HBCDs) was studied in separate aliquots of a well-homogenized indoor dust sample. These were: (a) exposed to natural light, and (b) kept in the dark. Results revealed a rapid photolytically-mediated shift from γ-HBCD to α-HBCD that was complete after 1 week of exposure, and a slower degradative loss of HBCDs via elimination of HBr. Under the specific conditions studied in this experiment, calculated half-lives (t_1/2) showed the decay in ΣHBCDs concentration was faster in light-exposed samples (t_1/2 = 12 weeks), than in light-shielded dust (t_1/2 = 26 weeks). Within-room spatial and temporal variability in concentrations and diastereomer patterns were studied in six and three rooms respectively. While in some rooms, little variability was detected, in others it was substantial. In one room, concentrations of ΣHBCDs and the relative abundance of γ-HBCD declined dramatically with increasing distance from a TV. The same TV appears to have influenced strongly the temporal variation in that room; with higher concentrations observed in its presence and when the TV was moved closer to the area sampled. Significant negative correlation was observed in one room between concentrations of ΣHBCDs and dust loading (g dust m^? 2 floor), implying “dilution” occurs at higher dust loadings.     

Atmospheric concentrations,gaseous–particulate distribution,and carcinogenic potential of polycyclic aromatic hydrocarbons in Assiut,Egypt

The concentrations of 15 priority PAHs were determined in the atmospheric gaseous and particulate phases from nine sites across Assiut City, Egypt. While naphthalene, acenaphthene, and fluorene were the most abundant in the gaseous phase with average concentrations of 377, 184, and 181 ng/m³, benzo[b]fluoranthene, chrysene, and benzo[g,h,i]perylene showed the highest levels in the particulate phase with average concentrations of 76, 6, and 52 ng/m³. The average total atmospheric concentration of target PAHs (1,590 ng/m³) indicates that Assiut is one of the highest PAH-contaminated areas in the world. Statistical analysis revealed a significant difference between the levels of PAHs in the atmosphere of urban and suburban sites (P?=?0.029 and 0.043 for gaseous and particulate phases, respectively). Investigation of diagnostic PAH concentration ratios revealed vehicular combustion and traffic exhaust emissions as the major sources of PAHs with a higher contribution of gasoline rather than diesel vehicles in the sampled areas. Benzo[a]pyrene has the highest contribution (average?=?32, 4 % for gaseous and particulate phases) to the total carcinogenic activity (TCA) of atmospheric PAHs. While particulate phase PAHs have higher contribution to the TCA, gaseous phase PAHs present at higher concentrations in the atmosphere are more capable of undergoing atmospheric reactions to form more toxic derivatives.