基于改进的非线性GM(1,1)模型的职业病预测研究

为了更准确地预测职业病，在传统GM(1,1)模型的基础上，提出改进的非线性GM(1,1)模型，在传统的GM(1,1)模型中引入弱化算子，将紧邻均值与原始数据之间的线性假设改为非线性假设，提高曲线的拟合度。以2005—2014年的全国职业病例数为研究对象，进行数据拟合和预测分析，其中以2014年职业病例数作为验证数据，并利用后验差比值和小误差概率2个参数，检验该改进模型的预测精度。由应用实例的分析结果可知:在职业病发病趋势的预测方面，改进的非线性GM(1,1)模型的预测精度提高到一级，曲线拟合度较高，预测得到2015年的职业病例数为34 900例。     

Morphology,pore size distribution,and nutrient characteristics in biochars under different pyrolysis temperatures and atmospheres

Journal of Material Cycles and Waste Management - To evaluate the agronomic potential of biochar, we prepared a series of biochars using rice straw waste under the limited oxygen cracking condition...     

Catalytic oxidation of CO over Pt/Fe3O4 catalysts: Tuning O2 activation and CO adsorption

• Strong metal-support interaction exists on Pt/Fe₃O₄ catalysts. • Pt metal particles facilitate the formation of oxygen vacancies on Fe₃O₄. • Fe₃O₄ supports enhance the strength of CO adsorption on Pt metal particles. The self-inhibition behavior due to CO poisoning on Pt metal particles strongly impairs the performance of CO oxidation. It is an effective method to use reducible metal oxides for supporting Pt metal particles to avoid self-inhibition and to improve catalytic performance. In this work, we used in situ reductions of chloroplatinic acid on commercial Fe₃O₄ powder to prepare heterogeneous-structured Pt/Fe₃O₄ catalysts in the solution of ethylene glycol. The heterogeneous Pt/Fe₃O₄ catalysts achieved a better catalytic performance of CO oxidation compared with the Fe₃O₄ powder. The temperatures of 50% and 90% CO conversion were achieved above 260°C and 290°C at Pt/Fe₃O₄, respectively. However, they are accomplished on Fe₃O₄ at temperatures higher than 310°C. XRD, XPS, and H₂-TPR results confirmed that the metallic Pt atoms have a strong synergistic interaction with the Fe₃O₄ supports. TGA results and transient DRIFTS results proved that the Pt metal particles facilitate the release of lattice oxygen and the formation of oxygen vacancies on Fe₃O₄. The combined results of O₂-TPD and DRIFTS indicated that the activation step of oxygen molecules at surface oxygen vacancies could potentially be the rate-determining step of the catalytic CO oxidation at Pt/Fe₃O₄ catalysts. The reaction pathway involves a Pt-assisted Mars-van Krevelen (MvK) mechanism.     

基于PCR-TGGE技术的餐厨垃圾厌氧消化微生物群落结构解析

为了解不同负荷下单相餐厨垃圾厌氧消化反应器内微生物群落结构演替特征,在单相厌氧消化反应器负荷为2.0～8.5kg·m-·3d-1(以VS计)的不同负荷条件下取样,运用16SrDNA的PCR-TGGE技术对反应器内微生物进行动态追踪.同时,运用Dice系统和NMDS软件对PCR-TGGE图谱进行分析.结果表明,负荷为4.0～6.0kg·m-·3d-1时,微生物群落结构变化不大;负荷为6.0～7.0kg·m-·3d-1时,微生物群落结构变化较为明显;负荷分别为7.0～8.0kg·m-·3d-1及8.5kg·m-·3d-1时,微生物群落结构变化最为明显.纵观整个过程,在餐厨垃圾厌氧消化反应器有机负荷在2.0～8.5kg·m-·3d-1下厌氧反应器内的微生物群落结构存在明显的阶段性演替;负荷为7.0kg·m-·3d-1时微生物群落结构的丰富度最好.     

Complete oxidation of methane on Co3O4-SnO2 catalysts

Co₃O₄-SnO₂ hybrid oxides were prepared by the coprecipitation method and were used to oxidate methane (CH₄) in presence of oxygen. The Co₃O₄-SnO₂ with a molar ratio of Co/(Co + Sn) at 0.75 exhibited the highest catalytic activity among all the Co₃O₄-SnO₂ hybrid oxides. Experimental results showed that the catalysts were considerably stable in the CH₄ combustion reaction, and were verified by X-ray photoelectron spectra (XPS). It was found that Co₃O₄ was the active species, and SnO₂ acted as a support or a promoting component in the Co₃O₄-SnO₂ hybrid oxides. The surface area was not a major factor that affected catalytic activity. The hydrogen temperatureprogrammed reduction (H₂-TPR) results demonstrated that the interaction between cobalt and tin oxides accelerated the mobility of oxygen species of Co₃O₄-SnO₂, leading to higher catalytic activity.     

Second organic aerosol formation from the ozonolysis of -pinene in the presence of dry submicron ammonium sulfate aerosol

An indoor chamber facility is described for investigation of atmospheric aerosol chemistry. Two sets of α-pinene ozonolysisexperiments were conducted in the presence of dry ammonium sulfate seed particle: ozone limited experiments and α-pinene limitedexperiments. The concentration of gas phase and particle phase species was monitored continuously by on-line instruments andrecorded automatically by data sampling system. The evolution of size distribution was measured by a scanning mobility particlesizer (SMPS), and α-pinene consumed was measured using GC-FID. Secondary organic aerosol (SOA) produced for seed-free systemis 100% organic in content, resulting from a sufficient supersaturation of low volatility organics to produce homogeneous nucleationfollowed by condensation to the aerosol. Secondary organic aerosol produced in seeded system is a mixture of organic and inorganicconstituents, initially forms via condensation onto the inorganic particles, and subsequent growth occurs via absorption into the organicsurface coating the inorganic core. Although the formation process and the size distribution for seed-free system and seeded system isdifferent, the ultimate mass of SOA formed is equal, and SOA yield for the two system located in the same regression line when usingone-product model, suggesting that the presence of dry ammonium sulfate seed has no measurable effect on the total aerosol yield, and the dry seed particle acts solely as a site upon which organic deposition occurs.     

铁碳微电解-Fenton法预处理苯胺基乙腈生产废水的动力学研究

通过采用铁碳微电解-Fenton法预处理苯胺基乙腈生产废水的实验研究，分析了处理过程的COD降解动力学；同时研究了单纯活性炭吸附和微电解过程中COD去除率的变化。结果表明，铁碳微电解的初期COD降解过程近似符合一级反应动力学，并且得到微电解与活性炭吸附对铁碳微电解降解COD的关系式；Fenton反应中通过研究有机物浓度和过氧化氢初始浓度与反应进程的关系，建立了反应动力学模型；单纯吸附实验COD去除率在24h内快速下降，而微电解在相应时间内COD去除率波动较小，为实际应用提供了数据经验和理论依据。     

延安市不稳定斜坡发育特征研究

通过对延安市地质灾害详细调查及统计分析,总结出区内不稳定斜坡发育类型及特征为:结构类型包括黄土不稳定斜坡、基岩不稳定斜坡和黄土-基岩不稳定斜坡,其中以黄土不稳定斜坡为主;变形破坏模式主要分为滑移(蠕滑)-拉裂模式、滑移-压致拉裂模式和弯曲-拉裂模式三类,其中以滑移(蠕滑)-拉裂模式最为普遍;斜坡发展失稳趋势为滑坡和崩塌,其中受斜坡岩土体结构类型、结构面、坡度、坡高及坡型等多因素控制,区内不稳定斜坡发展失稳趋势主要表现为崩塌。     

废弃轮胎制备中孔炭吸附材料工艺及性能研究

为了解决废弃轮胎造成的资源浪费和环境污染的问题,对以废弃轮胎橡胶为碳的前驱体原料,制备具有高吸附性能中孔炭材料工艺进行了系统的研究。通过XRD、扫描电镜以及比表面积分析,对制备的中孔炭微观结构和性能进行表征,讨论了炭化温度、碱炭比,以及活化温度和活化时间等工艺条件对制备中孔炭的产率、结构和性能的影响。结果表明,通过改变工艺条件制备的中孔炭的孔径分布可以在2~80 nm范围内进行调控。在500℃炭化温度,碱炭比为4∶1,900℃活化1 h的工艺条件下,制备的中孔炭的比表面积为473 m2/g,对甲基橙的最大吸附量达到254 mg/g。     

Chemical poison and regeneration of SCR catalysts for NOx removal from stationary sources

Selective catalytic reduction (SCR) of NO_x with NH₃ is an effective technique to remove NO_x from stationary sources, such as coal-fired power plant and industrial boilers. Some of elements in the fly ash deactivate the catalyst due to strong chemisorptions on the active sites. The poisons may act by simply blocking active sites or alter the adsorption behaviors of reactants and products by an electronic interaction. This review is mainly focused on the chemical poisoning on V₂O₅-based catalysts, environmental-benign catalysts and low temperature catalysts. Several common poisons including alkali/alkaline earth metals, SO₂ and heavy metals etc. are referred and their poisoning mechanisms on catalysts are discussed. The regeneration methods of poisoned catalysts and the development of poison-resistance catalysts are also compared and analyzed. Finally, future research directions in developing poisoning resistance catalysts and facile efficient regeneration methods for SCR catalysts are proposed.