Microbial characteristics in anaerobic membrane bioreactor treating domestic sewage: Effects of HRT and process performance

Two anaerobic membrane bioreactors (AnMBRs) equipped with different membrane pore size (0.4 or 0.05μm) were operated at 25℃ and fed with domestic wastewater.The hydraulic retention time (HRT) of the reactors was shortened.The microbial communities of the two AnMBRs were investigated by 16S rRNA gene amplicon sequencing to see the effects of HRT.The predominant Archaea was an aceticlastic methanogen Methanosaeta.The composition of hydrogenotrophic methanogens changed with the HRTs:the population ...     

Removal of carotene-like colored compounds by liquid-liquid extraction during polycyclic aromatic hydrocarbons analysis of plant tissue

Plants contain a wide variety of chemicals, some of which may have similar chromatographic behavior to polycyclic aromatic hydrocarbons (PAHs). During solid phase extraction (SPE) with Si-gel for instance, the co-elution of carotene-like colored compounds with PAHs has been observed. In this paper, liquid–liquid extraction was applied for the separation and subsequent analysis of PAHs from plant extracts. PAHs containing 2–6 rings, which include naphthalene, phenanthrene, pyrene, benzo[a]pyrene and benzo[ghi]perylene, were used as representative target chemicals. Carotene-like compounds extracted from Komatsuna (Brassica campestris) shoot by acetone followed by Si-gel treatment were incorporated as undesired components in the model matrix. Results showed the feasibility of employing either acetonitrile or 2% (w/v) KOH–methanol as solvents for high PAHs recovery and low extraction of colored fraction. For acetonitrile, 86.9–93.5% of each PAH could be recovered after three extraction cycles (relative standard deviation, RSD < 1.6%) with only about 10% co-extraction of colored fraction. For 2% KOH–methanol, PAHs recoveries ranging from 79.3% to 83.1% after five cycles (RSD < 1.5%) were achieved while the percent extraction of colored fraction was also low at 10%. The relatively higher selectivity of the solvents for PAHs over the colored fraction as well as the solubility of the matrix solution in the solvent may have contributed to these results. On this basis, liquid–liquid extraction is very useful for the pre-treatment of plant extracts for PAHs analysis.     

Population growth and natural-resources pressures in the Mekong River Basin

The Mekong River Basin possesses the region's largest potential water source and related resources, which support ongoing economic development and basin community livelihoods. It is currently witnessing a major demographic transition that is creating both opportunities and challenges. An analysis of the complex relationship between demographic changes and impacts on the natural-resource base confirms that resource exploitation is occurring not only to meet growing domestic needs but also for other vested interests. Population, together with other major drivers, such as institutions, markets, and technology, will have a very strong bearing on the way in which the rich resources of the Mekong River Basin are developed and distributed in the present and future. The Mekong River Basin's rich resources, and the benefits derived from them, are unevenly distributed both in time and geographically. Moreover, since the causes and impacts do not respect political boundaries, the Mekong countries need to jointly develop alternative management strategies to meet projected demands within the sustainable capacity of the Mekong River Basin natural-resource base.     

Aniline removal by Photocatalytic reaction of iron(iii) mediated with dissolved organic matter

When light (> 370 nm) was allowed to interact with an aqueous solution containing dissolved organic matter (DOM) and Fe(III), removal of aniline (AN) was observed. This was due to the photocatalytic reaction of Fe(III) mediated by DOM. Syringic acid (SYA) and humic acid (HA) were used as DOM in the present study. The ¹⁵N‐NMR spectrum of the product mixture from the light irradiation of the SYA/Fe(III) system demonstrated that AN was covalently bound to SYA. The kinetics of AN removal were, therefore, interpreted by assuming covalent binding between DOM and AN. The amounts of covalent binding sites and the apparent second‐order rate constants could be evaluated, and the amounts of covalent binding sites decreased with the increases of the concentration of DOM. This is attributed that the polymerization of DOM by the photo‐oxidation competed with the covalent binding between AN and DOM.     

Motivation of Japanese companies to take environmental action to reduce their greenhouse gas emissions: an econometric analysis

To analyze the motivations of Japanese companies to take environmental actions to reduce their greenhouse gas (GHG) emissions, we used FY2006 research data and questioned Japanese industries regarding their reduction of GHG emissions. Empirical investigations revealed that voluntary targets set by industry organizations, government requirements, and advance responses to possible future regulations can positively influence environmental actions for GHG emission reduction; however, cost reductions and corporate social responsibility fulfillment cannot.

Dynamic flow analysis of current and future end-of-life vehicles generation and lead content in automobile shredder residue

Since end-of-life vehicles (ELVs) contain toxic substances, they have to be treated properly. The purpose of this study was to obtain useful information for ELV management from the viewpoint of toxicity. We focused on lead as a representative toxic substance contained in vehicles and investigated the dynamic substance flow of lead contained in ELVs and its content in automobile shredder residue (ASR). A population balance model was used to estimate the number of ELVs generated between FYs (fiscal year) 1990–2020, employing a Weibull distribution for the lifespan distribution. Sixteen lead-containing components of the vehicle were considered. It was estimated that the annual number of ELVs generated would be 2.9 million as of FY2020. The results implied that it is hard to remove Pb completely. This is because 5,000–11,000 t-Pb will still remain in vehicles in use in FY2020 even though most components in new model vehicles could be replaced by lead-free alternatives. As of FY2010, the substance flow showed that Pb contained in ELVs amounted to 4,600–5,700 t-Pb. Of this, 13.2–14.0 % was contained in ASR. The Pb content in ASR could be dramatically decreased by FY2020, but it will continue to contain 240–420 mg-Pb/kg if the treatment system is not improved.     

The impact of institutional factors on the performance of genuine savings

This study investigates institutional factors affecting the performance of genuine savings (GS), which are often used in assessing sustainable development, and adopts a model of autoregressive conditional heteroscedasticity in mean. We pay particular attention to the contribution of institutions to decrease the volatility level of the GS path. The estimation results show that there are two ways in which institutions affect GS performance. First, high quality of institutions enhances the GS level directly. Second, high quality of institutions enhances the GS level via stabilizing the volatility of the GS path. Considering both effects in their totality, institutional improvement plays an important role in realizing a sustainable development path.     

Potential of microalgae Bio-Coke as a sustainable solid fuel alternative to coal coke

Energy and environmental issues have triggered the search for new sources of green energy alternatives in recent years. Biofuel production from renewable sources is widely considered one of the most sustainable alternatives for environmental and economic sustainability. Microalgae are currently being promoted as one of the most promising liquid biofuel feedstocks due to their rapid growth, high lipid production capacity, and carbon–neutral cycle. In this study, whole microalgae cells were utilized as raw material to produce solid biofuel, i.e., Bio-Coke, and this study aimed to investigate the possibility of microalgae Bio-Coke as an alternative to coal coke. The results show that Bio-Coke can be produced from microalgae in the temperature range of 80–100 °C. The apparent density is between 1.253 and 1.261 g/cm³, comparable to the apparent density of lignocellulosic Bio-Coke. Additionally, the calorific value is higher than the calorific value of lignocellulosic Bio-Coke and within the range of the calorific value of subbituminous coal. Therefore, microalgae Bio-Coke can be utilized to replace coal coke usage in the future.

     

Development of a Model for Predicting the Volatilization Flux from Unsaturated Soil Contaminated by Volatile Chemical Substances

Environmental Modeling & Assessment - This work developed a model for predicting the volatilization flux from the unsaturated soil contaminated by volatile chemical substances (VCSs) such as...