Migration Pathways and Remediation of Urban Runoff for PAH Control

The migration pathways for polyaromatic hydrocarbons (PAH) and the associated active attenuating mechanisms within the urban environment are examined. The interest in developing an improved understanding of PAH migration/attenuation is focused toward quantification of the cost-effectiveness of urban runoff control strategies for mitigation of PAH inputs to receiving water bodies.A case study application to the City of Sault Ste Marie demonstrates that snow removal from sub-basins with the largest deposition rates, and relatively small wet and/or dry stormwater management ponds, are the most cost-effective remediation strategies.     

PAH deposition to snow surface

The urban snowpack effectively acts as a collection device for atmospheric-deposited PAHs. When these PAHs are flushed out in a short time interval along with springtime snowmelt, these cause shockloading to receiving waters. In order to assess the PAH deposition and accumulation in urban snowpacks, a deposition survey of PAH for the winter months of 1991-92 from the city of Sault Ste. Marie, Ontario, Canada was undertaken. The results of the survey are interpreted in view of prevailing meteorology and various emission sources in the study area. The relative PAH deposition levels (to BaP) are compared with relative source emission fingerprints to examine consistency in sampling and analysis. While analyzing the PAH samples using the ASTM (1987) method, the problem of concentration levels being below the detection level was encountered. The ASTM method for PAH analysis was modified to enhance the detection limit of the PAHs by concentrating the PAH extract to very low volumes, on the order of 200-300 microL.     

Plant steroid hormones produced under Ni stress are involved in the regulation of metal uptake and oxidative stress in Brassica juncea L

Brassinosteroids (BRs) are involved in the amelioration of various biotic and abiotic stresses. With an aim to explore the role of BRs under heavy metal stress, plants of Brassica juncea L. were grown in pots. The plants were subjected to various concentrations of Nickel metal (0.0, 0.2, 0.4 and 0.6 mM) and harvested on 60th day in order to observe the expression of these hormones. The isolated BRs from the leaves of Brassica plants characterized by GC-MS include 24-Epibrassinolide (24-EBL), Castasterone, Dolicholide and Typhasterole. The effect of isolated 24-EBL was studied on Ni metal uptake and antioxidative defense system in 60 d old plants of Brassica. It was observed that 24-EBL significantly increased the activities of stress ameliorating enzymes and lowered the metal uptake in plants. This is the first report in B. juncea L. plants showing the expression of BRs under metal treatments and effect of the isolated 24-EBL on metal uptake and in oxidative stress management.     

Fluoride, boron and nitrate toxicity in ground water of northwest Rajasthan, India

The study was carried out to access the fluoride, boron, and nitrate concentrations in ground water samples of different villages in Indira Gandhi, Bhakra, and Gang canal catchment area of northwest Rajasthan, India. Rural population, in the study site, is using groundwater for drinking and irrigation purposes, without any quality test of water. All water samples (including canal water) were contaminated with fluoride. Fluoride, boron, and nitrate were observed in the ranges of 0.50–8.50, 0.0–7.73, and 0.0–278.68 mg/l, respectively. Most of the water samples were in the categories of fluoride 1.50 mg/l, of boron 2.0–4.0 mg/l, and of nitrate <?45 mg/l. There was no industrial pollution in the study site; hence, availability of these compounds in groundwater was due to natural reasons and by the use of chemical fertilizers.     

Health benefits valuation of regulatory intervention for air pollution control in thermal power plants in Delhi,India

This study estimates minimum marginal health benefits (morbidity reduction only) of air pollution control and total health benefits arising from regulatory intervention regarding the adoption of the World Bank emission guidelines (WBEG) for thermal power plants (TPPs) in Delhi. The Industrial Source Complex-Short-Term Version–3 (ISCST3) model has been used to estimate the contribution to air pollution from TPPs. The household health production function (avertive behaviour) has been used to value health benefits of air pollution control. The study revealed that the ambient air pollution due to TPPs is reduced by between 62.17% to 83.45% by adopting the WBEG. Annual marginal benefit due to reduction in exposure to air pollution by 1 μg m^?3 is estimated to be US$0.353 per person. Total annual health benefits for adopting the WBEG for TPPs are estimated at US$235.19 million. This study provides a novel methodology to evaluate health benefits of regulatory intervention.     

Indoor–outdoor concentrations of RSPM in classroom of a naturally ventilated school building near an urban traffic roadway

A study on indoor–outdoor RSPM (PM₁₀, PM_2.5 and PM_1.0) mass concentration monitoring has been carried out at a classroom of a naturally ventilated school building located near an urban roadway in Delhi City. The monitoring has been planned for a year starting from August 2006 till August 2007, including weekdays (Monday, Wednesday and Friday) and weekends (Saturday and Sunday) from 8:0 a.m. to 2:0 p.m., in order to take into account hourly, daily, weekly, monthly and seasonal variations in pollutant concentrations. Meteorological parameters, including temperature, rH, pressure, wind speed and direction, and traffic parameters, including its type and volume has been monitored simultaneously to relate the concentrations of indoor–outdoor RSPM with them. Ventilation rate has also been estimated to find out its relation with indoor particulate concentrations. The results of the study indicates that RSPM concentrations in classroom exceeds the permissible limits during all monitoring hours of weekdays and weekends in all seasons that may cause potential health hazards to occupants, when exposed. I/O for all sizes of particulates are greater than 1, which implies that building envelop does not provide protection from outdoor pollutants. Further, a significant influence of meteorological parameters, ventilation rate and of traffic has been observed on I/O. Higher I/O for PM₁₀ is indicating the presence of its indoor sources in classroom and their indoor concentrations are strongly influenced by activities of occupants during weekdays.     

Construction of fuzzy membership functions for urban vehicular exhaust emissions modeling

This paper presents a method for constructing a membership function (MF) for the fuzzy sets that expert systems deal with. This paper introduces a Bezier curve-based mechanism for constructing MFs of convex normal fuzzy sets. The mechanism can fit any given data set with a minimum level of discrepancy. In the absence of data, the mechanism can be intuitively manipulated by the user to construct MFs with the desired shape. MFs have been developed using the proposed mechanism for urban vehicular exhaust emission modeling. It has been observed that all meteorological and vehicular parameters have either S-shaped MFs or Z-shaped MFs. Gaussian MF has been mostly applied for modeling air quality. The present study explored the application of fuzzy MF to analyze air pollution data from vehicular emission. The study reveals that S-shaped and Z-shaped MF can be used in addition to Gaussian MF.     

Fouling and Degradation of Polycarbonate in Seawater: Field and Lab Studies

Biofouling and ensuing microbial mediated degradation of Bisphenol A polycarbonate was studied by immersing the samples in sea water of Bay of Bengal (Chennai, India) for 3 months and also under controlled laboratory conditions with marine mixed microbial consortia for 12 months. A 9% weight loss in the sample was observed after 1 year of incubation under in vitro laboratory conditions. A 5% reduction in number average molecular weight and an additional oligomer with a molecular weight of 930 was observed in the same sample. Contact angle decreased by 11% indicating an increase in the surface hydrophilicity. The specific heat decreased by 44% and glass transition temperature decreased by 3 °C with respect to the control indicating chain scission. Formation of new hydroxyl groups and cleavage of carbonate bonds in polycarbonate suggested biodegradation. About 9 μg mL⁻¹ of Bisphenol A, a monomer of polycarbonate, as well as its oxidized products were detected in the supernatant. The nature of degradation in field and in vitro was different. It was predominantly oxidation in the former and hydrolysis in the later environment. A strain exhibiting hydrolase activity was isolated at the end of the 12 months from the in vitro mixed consortia and was identified, based on biochemical and 16S rDNA tests, as Pseudomonas sp. BP2 (GenBank accession no. EU920674).     

Suspended Particulate Matter Distribution in Rural-Industrial Satna and in Urban-Industrial South Delhi

An air quality sampling program was designed and implemented to collect the baseline concentrations of respirable suspended particulates (RSP = PM₁₀), non-respirable suspended particulates (NRSP) and fine suspended particulates (FSP = PM_2.5). Over a three-week period, a 24-h average concentrations were calculated from the samples collected at an industrial site in Southern Delhi and compared to datasets collected in Satna by Envirotech Limited, Okhla, Delhi in order to establish the characteristic difference in emission patterns. PM_2.5, PM₁₀, and total suspended particulates (TSP) concentrations at Satna were 20.5 ± 6.0, 102.1 ± 41.1, and 387.6 ± 222.4 μg m⁻³ and at Delhi were 126.7 ± 28.6, 268.6 ± 39.1, and 687.7 ± 117.4 μg m⁻³. Values at Delhi were well above the standard limit for 24-h PM_2.5 United States National Ambient Air Quality Standards (USNAAQS; 65 μg m⁻³), while values at Satna were under the standard limit. Results were compared with various worldwide studies. These comparisons suggest an immediate need for the promulgation of new PM_2.5 standards. The position of PM₁₀ in Delhi is drastic and needs an immediate attention. PM₁₀ levels at Delhi were also well above the standard limit for 24-h PM₁₀ National Ambient Air Quality Standards (NAAQS; 150 μg m⁻³), while levels at Satna remained under the standard limit. PM_2.5/PM₁₀ values were also calculated to determine PM_2.5 contribution. At Satna, PM_2.5 contribution to PM₁₀ was only 20% compared to 47% in Delhi. TSP values at Delhi were well above, while TSP values at Satna were under, the standard limit for 24-h TSP NAAQS (500 μg m⁻³). At Satna, the PM₁₀ contribution to TSP was only 26% compared to 39% in Delhi. The correlation between PM₁₀, PM_2.5, and TSP were also calculated in order to gain an insight to their sources. Both in Satna and in Delhi, none of the sources was dominant a varied pattern of emissions was obtained, showing the presence of heterogeneous emission density and that nonrespirable suspended particulate (NRSP) formed the greatest part of the particulate load.     

Development of controlled release formulations of azadirachtin-A employing poly(ethylene glycol) based amphiphilic copolymers

Controlled release (CR) formulations of azadirachtin-A, a bioactive constituent derived from the seed of Azadirachta indica A. Juss (Meliaceae), have been prepared using commercially available polyvinyl chloride, polyethylene glycol (PEG) and laboratory synthesized poly ethylene glycol–based amphiphilic copolymers. Copolymers of polyethylene glycol and various dimethyl esters, which self assemble into nano micellar aggregates in aqueous media, have been synthesized. The kinetics of azadirachtin-A, release in water from the different formulations was studied. Release from the commercial polyethylene glycol (PEG) formulation was faster than the other CR formulations. The rate of release of encapsulated azadirachtin-A from nano micellar aggregates is reduced by increasing the molecular weight of PEG. The diffusion exponent (n value) of azadirachtin-A, in water ranged from 0.47 to 1.18 in the tested formulations. The release was diffusion controlled with a half release time (t_1/2) of 3.05 to 42.80 days in water from different matrices. The results suggest that depending upon the polymer matrix used, the application rate of azadirachtin-A can be optimized to achieve insect control at the desired level and period.