Performance characteristics of sequential separation and quantification of lead-210 and polonium-210 by ion exchange chromatography and nuclear spectrometric measurements

A selective separation and quantitative determination procedure for 210Pb and 210Po in various environmental matrices from different sources such as IAEA-326 soil, phosphate rocks (PR), and phosphogypsum (PG) was developed. The tested samples were digested sequentially using concentrated mineral acids (HF, HNO3) by a programmable high-pressure microwave digestion system. The sample solution was loaded onto a preconditioned ion exchange column (Sr-resin) for chromatographic separation. Polonium-210 was eluted by 6 M HNO3 then spontaneously deposited onto polished silver discs to be measured using low-background alpha spectrometry. Lead-210 was sequentially eluted using 6 M HCl solution, precipitated as lead oxalate, dissolved in HNO3 solution, and mixed with scintillation cocktail to be measured by liquid scintillation counting (LSC). Performance of the developed procedure was tested using a reference soil (IAEA-326), with recommended isotope values, that was used as a quality control to assess separation and quantification efficiency (recovery %). The minimum detectable activities of 210Pb and 210Po were found to be 24 and 0.28 Bq kg(-1) for the measurements using LSC and alpha spectrometry, respectively. The recoveries (%) of 210Pb and 210Po were found to be 80 and 60%, respectively. To test the validity of the proposed LSC method, a comparative study was performed by measuring 210Pb activity concentration in test samples by nondestructive gamma-ray spectrometry.     

Graphene Oxide Caged Biopolymer Nanocomposite for Purification of Rare Earth Elements from High Grade Egyptian Monazite Concentrate

Journal of Polymers and the Environment - Rare earth elements (REEs) play a critical role in the applications of advanced materials. In this respect, an eco-friendly calcium/alginate-graphene oxide...     

Mobility of radionuclides in soil/groundwater system: Comparing the influence of EDTA and four of its degradation products

The adsorption behavior of ²⁴¹Am, ⁶⁰Co, ¹³⁷Cs and ⁸⁵Sr in the presence and absence of chelating ligands (ethylenediaminetetraacetic acid, ethylenediaminediacetic acid, hydroxyethyliminodiacetic acid, iminodiaceiticacid and methyliminodiacetic acid) was investigated. Sorption affinity in the absence of chelating ligands followed: Am(III) > Co(II) > Cs(I) > Sr(II). The presence of chelating ligands generally had little effect on sorption of ⁸⁵Sr and ¹³⁷Cs with K_d values 110 and 690 mL g⁻¹, respectively. But at 0.02 M of ethylenediaminetetraacetic or hydroxyethyliminodiacetic, the K_d decreased to 5 or 63 mL g⁻¹, respectively, where thermochemical modeling indicated almost all ⁸⁵Sr is complexed with these ligands. The K_d values for ²⁴¹Am and ⁶⁰Co generally decreased with increasing chelating agent concentrations. In notable cases, the K_d values for Am increased at specific concentrations of 10⁻³ M for IDA, MIDA and 10⁻⁴ M for EDDA. This is proposed to be due to formation of a ternary surface complex.     

Utilization of natural chabazite and mordenite as a reactive barrier for immobilization of hazardous heavy metals

Introduction  

Understanding the sorption process in natural geomedia is necessary for effective utilization of these materials as low-cost adsorbents and consequently as controlled release hazardous elements. This research was oriented to investigate the affinity of two natural zeolite minerals towards cobalt, zinc, and nickel mixture as an important industrial and radioactive waste.