In situ formation of bimetallic FeNi nanoparticles on sand through green technology: Application for tetracycline removal

• In situ preparation of FeNi nanoparticles on the sand via green synthesis approach. • Removal of tetracycline using GS-FeNi in batch and column study. • Both reductive degradation and sorption played crucial role the process. • Reusability of GS-FeNi showed about 77.39±4.3% removal on 4th cycle. • TC by-products after interaction showed less toxic as compared with TC. In this study, FeNi nanoparticles were green synthesized using Punica granatum (pomegranate) peel extract, and these nanoparticles were also formed in situ over quartz sand (GS-FeNi) for removal of tetracycline (TC). Under the optimized operating conditions, (GS-FeNi concentration: 1.5% w/v; concentration of TC: 20 mg/L; interaction period: 180 min), 99±0.2% TC removal was achieved in the batch reactor. The removal capacity was 181±1 mg/g. A detailed characterization of the sorbent and the solution before and after the interaction revealed that the removal mechanism(s) involved both the sorption and degradation of TC. The reusability of reactant was assessed for four cycles of operation, and 77±4% of TC removal was obtained in the cycle. To judge the environmental sustainability of the process, residual toxicity assay of the interacted TC solution was performed with indicator bacteria (Bacillus and Pseudomonas) and algae (Chlorella sp.), which confirmed a substantial decrease in the toxicity. The continuous column studies were undertaken in the packed bed reactors using GS-FeNi. Employing the optimized conditions, quite high removal efficiency (978±5 mg/g) was obtained in the columns. The application of GS-FeNi for antibiotic removal was further evaluated in lake water, tap water, and ground water spiked with TC, and the removal capacity achieved was found to be 781±5, 712±5, and 687±3 mg/g, respectively. This work can pave the way for treatment of antibiotics and other pollutants in the reactors using novel green composites prepared from fruit wastes.     

Persistence and dissipation of flubendiamide and its risk assessment on gherkin (Cucumis anguria L.)

A supervised open field trial was conducted to evaluate the dissipation pattern and risk assessment of flubendiamide in gherkin fruits following foliar application of Fame 480 SC at 60 and 120 g a.i.?ha^?1. Samples of gherkin fruits were drawn at different time intervals and quantified by HPLC-DAD. The maximum initial deposits of flubendiamide on gherkin were found to be 0.79 and 1.52 mg kg^?1, respectively, at recommended and double the recommended doses. The dissipation pattern of flubendiamide followed a first-order kinetics with half-lives of 1.87 to 2.16 days at 60 and 120 g a.i.?ha^?1, respectively. The limit of quantification of flubendiamide and desiodo flubendiamide was observed to be 0.01 mg kg^?1 for gherkin fruit and soil substrates. Theoretical maximum residue contribution (TMRC) for flubendiamide was calculated and found to be well below the maximum permissible intake (MPI) on gherkin fruits. Thus, the application of flubendiamide at the recommended dose on gherkin fruits presents no human health risks and safe to consumers.     

Variability of soil-water quality due to Tsunami-2004 in the coastal belt of Nagapattinam district, Tamilnadu

In this study, the Tsunami-caused deterioration of soil and groundwater quality in the agricultural fields of coastal Nagapattinam district of Tamilnadu state in India is presented by analyzing their salinity and sodicity parameters. To accomplish this, three sets of soil samples up to a depth of 30cm from the land surface were collected for the first six months of the year 2005 from 28 locations and the ground water samples were monitored from seven existing dug wells and hand pumps covering the study region at intervals of 3 months. The EC and pH values of both the soil and ground water samples were estimated and the spatial and temporal variability mappings of these parameters were performed using the geostatistical analysis module of ArcGIS((R)). It was observed that the spherical semivariogram fitted well with the data set of both EC and pH and the generated kriged maps explained the spatial and temporal variability under different ranges of EC and pH values. Further, the recorded EC and pH data of soil and ground water during pre-Tsunami periods were compared with the collected data and generated variability soil maps of EC and pH of the post-Tsunami period. It was revealed from this analysis that the soil quality six months after the Tsunami was nearing the pre-Tsunami scenario (EC< 1.5dSm(-1); pH<8), whereas the quality of ground water remained highly saline and unfit for irrigation and drinking. These observations were compared with the ground scenarios of the study region and possible causes for such changes and the remedial measures for taking up regular agricultural practices are also discussed.     

The use of enhanced bioremediation at the Savannah River Site to remediate pesticides and PCBs

Enhanced bioremediation is quickly developing into an economical and viable technology for the remediation of contaminated soils. Until recently, chlorinated organic compounds have proven difficult to bioremediate. Environmentally recalcitrant compounds, such as polychlorinated biphenyls (PCBs) and persistent organic pesticides (POPs) such as dichlorodiphenyl trichloroethane (DDT) have shown to be especially arduous to bioremediate. Recent advances in field‐scale bioremedial applications have indicated that biodegradation of these compounds may be possible. Engineers and scientists at the Savannah River Site (SRS), a major DOE installation near Aiken, South Carolina, are using enhanced bioremediation to remediate soils contaminated with pesticides (DDT and its metabolites, heptachlor epoxide, dieldrin, and endrin) and PCBs. This article reviews the ongoing remediation occurring at the Chemicals, Metals, and Pesticides (CMP) Pits using windrow turners to facilitate microbial degradation of certain pesticides and PCBs. © 2003 Wiley Periodicals, Inc.     

Water Supply Planning Considering Uncertainties in Future Water Demand and Climate: A Case Study in an Illinois Watershed

Ensuring an adequate, reliable, clean, and affordable water supply for citizens and industries requires informed, long-range water supply planning, which is critically important for water security. A balance between water supply and demand must be considered for a long-term plan. However, water demand projections are often highly uncertain. Climate change could impact the hydrologic processes, and consequently, threaten water supply. Thus, understanding the uncertainties in future water demand and climate is critical for developing a sound water supply plan. In Illinois, regional water supply planning attempts to explore the impacts of future water demand and climate on water supply using scenario analyses and hydrologic modeling. This study is aimed at developing a water supply planning framework that considers both future water demand and climate change impacts. This framework is based on the Soil and Water Assessment Tool to simulate the watershed hydrology and conduct scenario analyses that consider the uncertainties in both future water demand and climate as well as their impacts on water supply. The framework was applied to water supply planning efforts in the Kankakee River watershed. The Kankakee River watershed model was calibrated and validated to observed streamflow records at four long-term United States Geological Survey streamflow gages. Because of the many model parameters involved, the calibration process was automated and was followed by a manual refinement, resulting in good model performance. Long-range water demand projections were prepared by the Illinois State Water Survey. Six future water demand scenarios were established based on a suite of assumptions. Climate scenarios were obtained from the Coupled Model Intercomparison Projection Phase 5 datasets. Three representative concentration pathways (RCPs), RCP2.6, RCP4.5, and RCP8.5, are used in the study. The scenario simulation results demonstrated that climate change appears to have a greater impact on water availability in the study area than water demand. The framework developed in this study can also be used to explore the impacts of uncertainties of water demand and climate on water supply and can be extended to other regions and watersheds.     

FLOOD STAGE FORECASTING WITH SUPPORT VECTOR MACHINES1

ABSTRACT: Machine learning techniques are finding more and more applications in the field of forecasting. A novel regression technique, called Support Vector Machine (SVM), based on the statistical learning theory is explored in this study. SVM is based on the principle of Structural Risk Minimization as opposed to the principle of Empirical Risk Minimization espoused by conventional regression techniques. The flood data at Dhaka, Bangladesh, are used in this study to demonstrate the forecasting capabilities of SVM. The result is compared with that of Artificial Neural Network (ANN) based model for one‐lead day to seven‐lead day forecasting. The improvements in maximum predicted water level errors by SVM over ANN for four‐lead day to seven‐lead day are 9.6 cm, 22.6 cm, 4.9 cm and 15.7 cm, respectively. The result shows that the prediction accuracy of SVM is at least as good as and in some cases (particularly at higher lead days) actually better than that of ANN, yet it offers advantages over many of the limitations of ANN, for example in arriving at ANN's optimal network architecture and choosing useful training set. Thus, SVM appears to be a very promising prediction tool.     

Soil metabolic pulses: water, substrate, and biological regulation

Pulses of metabolic activity are a common ecological response to intermittently available resources, and in soils these pulses often occur in response to wetting. To better understand variation in soil pulses, we conducted a distributed field experiment at seven sites along a 2200-m elevation transect in southern California, USA. Treatments included both water and water + substrate additions and two measurements of soil respiration within one hour. These experiments were repeated 11 times throughout 2009-2010. Additions of substrate led to consistently higher pulse fluxes, exceeding 10 micromol CO2 x m(-2( x s(-1), than additions of water alone. These results support a sequential limitation by two resources where an initial limiting resource acts as a switch and, after activation, processes are regulated by a second resource. In contrast to general expectations of increasing pulses with higher soil organic matter (SOM), pulses exhibited strong scale dependencies. Pulses during the summer period and SOM were correlated positively within sites and negatively between sites. This cross-scale divergence implies that, at low elevations, the proportion of SOM available for pulse metabolism was a much larger fraction than at higher elevations. With expected climate changes leading to more frequent drying-wetting cycles, regulation of metabolic pulses will increasingly influence long-term biogeochemical dynamics.     

Determination of fluopicolide in grapes and soil using an easy sample preparation method and gas chromatography-mass spectrometry

A simple analytical method was developed and validated to determine fluopicolide residues in grapes and soil using the “Quick, Easy, Cheap, Effective, Rugged and Safe” approach followed by gas chromatography-mass spectrometry in the selected ion monitoring mode. Fluopicolide residues were extracted from grape and soil samples with acetonitrile, and the extracts were cleaned up by dispersive solid-phase extraction with primary secondary amine sorbent. The limit of quantification was 0.02 mg kg^?1 with grape and soil samples spiked at three levels, and recoveries were from 95% to 101% and 94% to 101% with relative standard deviations from 0.2% to 4.4%. The method is less expensive and safer than existing analytical methods for grapes and soil.     

Cytogenetic studies of chromium (III) oxide nanoparticles on Allium cepa root tip cells

The current study evaluates the cytogenetic effects of chromium (III) oxide nanoparticles on the root cells of Allium cepa. The root tip cells of A. cepa were treated with the aqueous dispersions of Cr₂O₃ nanoparticles (NPs) at five different concentrations (0.01, 0.1, 1, 10, and 100 μg/mL) for 4 hr. The colloidal stability of the nanoparticle suspensions during the exposure period were ascertained by particle size analyses. After 4 hr exposure to Cr₂O₃ NPs, a significant decrease in mitotic index (MI) from 35.56% (Control) to 35.26% (0.01 μg/mL), 34.64% (0.1 μg/mL), 32.73% (1 μg/mL), 29.6% (10 μg/mL) and 20.92% (100 μg/mL) was noted. The optical, fluorescence and confocal laser scanning microscopic analyses demonstrated specific chromosomal aberrations such as—chromosome stickiness, chromosome breaks, laggard chromosome, clumped chromosome, multipolar phases, nuclear notch, and nuclear bud at different exposure concentrations. The concentration-dependent internalization/bio-uptake of Cr₂O₃ NPs may have contributed to the enhanced production of anti oxidant enzyme, superoxide dismutase to counteract the oxidative stress, which in turn resulted in observed chromosomal aberrations and cytogenetic effects. These results suggest that A. cepa root tip assay can be successfully applied for evaluating environmental risk of Cr₂O₃ NPs over a wide range of concentrations.