Achieving quality environmental audits: Twenty tips for success

In 1995 the authors spent a considerable amount of time conducting audits and audit training classes all over the world. In rolling out Colgate-Palmolive's reengineered environmental audit program, they coupled a two-day training program with a three-day audit. Whether in Asia-Pacific, South America, Europe, or the United States, auditors, especially those newly trained, always seemed to fall into the same traps time and again. In order to facilitate the learning process, the authors prepared a list of 20 tips to use at the beginning and end of all training programs and audits. In this article, the authors share the 20 “golden rules” to help all auditors improve the quality of their audits.     

Measuring the success of the federal government's Brownfields Program

In 1995, the U.S. Environmental Protection Agency (US EPA) initiated the Brownfields Program to help local governments clean up and reuse hundreds of thousands of contaminated former factories and transportation and other commercial sites in cities and industrialized suburbs. By the end of 2002, the Brownfields Program had distributed grants of about $200,000 each to 436 local governments. Program grants have diffused through federal, state, regional, and local levels of government and private and not‐for profit organizations, and have reached into economically distressed neighborhoods. As expected, grant recipients disproportionately had a legacy of contaminated industrial sites and relatively large African American and/or Latino populations. But abandoned factories and environmental justice concerns do not completely explain the geographical distribution of recipients. Award winners tended to be larger cities with more capacity to compete for grants and were likely to be connected to sources of information about the grant opportunity and to decision makers. With a few exceptions, recipients consider the program to be highly successful at stimulating entrepreneurs to remediate and redevelop sites and, sometimes, surrounding neighborhoods. © 2005 Wiley Periodicals, Inc.     

Influence of quaternary ammonium on sorption of selected metal cations onto clinoptilolite zeolite

Clay minerals and zeolites have large cation exchange capacities, which enable them to be modified by cationic surfactant to enhance their sorption of organic and anionic contaminants. In this study, the influence of quaternary ammonium surfactants on sorption of five metal cations (Cs+, Sr+, La3+, Pb2+, and Zn2+) onto a clinoptilolite zeolite was investigated. Generally, the metal cation sorption capacity and affinity for the zeolite decreased, indicating that presorbed cationic surfactants blocked sorption sites for metal cations, as the surfactant loading on the zeolite increased. Cesium and Pb2+ sorption was affected to a small extent, indicating that selective sorption for Cs+ and specific sorption for Pb2+ play an important role in addition to cation exchange. Sorption of cationic surfactants on zeolite preloaded with different metal cations showed a strong correlation with the chain length of the surfactant tail group, while the roles of the charges and types of the metal cations were minimal. As the chain length increases, the critical micelle concentration decreases and the surfactant molecules become more hydrophobic, resulting in progressive bilayer coverage. Desorption of presorbed metal cations by cationic surfactants was strongly affected by the surfactant chain length and metal type. More metal cations, particularly Sr2+ and Zn2+, desorbed with an increase in surfactant chain length. The results, in combination with those from organic and oxyanion sorption on surfactant-modified zeolite, may be used for future surfactant modification to target sorption and desorption of a specific type of contaminant or a mixture of different types of contaminants.     

Sample storage and extraction efficiencies in determination of polycyclic and nitro musks in sewage sludge

Analytical technology is continuously improving, developing better methods for isolating and concentrating trace compounds in environmental samples. Polycyclic and nitro musks (PNMs) are one group of emerging trace compounds detected in municipal wastewater. Differences in sample storage, preparation, and extraction methods for their measurement have led to variability in results. We analyzed 11 PNMs by GC/MS and compared the results of different storage times and extraction methods (supercritical fluid (SFE) or microwave-assisted (MAE)) for 202 samples of primary sludge, waste activated sludge (WAS), raw sludge, and aerobically/anaerobically digested biosolids collected from Canadian municipal wastewater treatment plants. Sixty-three air-dried samples were extracted by SFE, and 139 air-dried, centrifuged, or filtered samples were extracted by MAE. The mean surrogate recoveries were 89% (standard deviation (SD)=11%) for d(10)-anthracene by SFE and 88% (SD=14%) for d(10)-phenanthrene by MAE. Storage study results showed that PNM concentrations changed by a mean of 7% and 9% for primary sludge and WAS respectively after four weeks and decreased up to 25% after 13.5 months of storage in amber glass containers at -18 degrees C. Air-drying of sludge at room temperature caused losses of about 50% of PNM concentrations compared to centrifugation. The proportions of PNMs present in the liquid phase of sludge samples were less than 5% compared to proportions in the sludge solids. The most complete liquid-solid separation was achieved by filtration of frozen/thawed sludge samples, producing a liquid phase that contained less than 1% of the total musk content of the sample.     

Analyzing the Impacts of Dams on Riparian Ecosystems: A Review of Research Strategies and Their Relevance to the Snake River Through Hells Canyon

River damming provides a dominant human impact on river environments worldwide, and while local impacts of reservoir flooding are immediate, subsequent ecological impacts downstream can be extensive. In this article, we assess seven research strategies for analyzing the impacts of dams and river flow regulation on riparian ecosystems. These include spatial comparisons of (1) upstream versus downstream reaches, (2) progressive downstream patterns, or (3) the dammed river versus an adjacent free-flowing or differently regulated river(s). Temporal comparisons consider (4) pre- versus post-dam, or (5) sequential post-dam conditions. However, spatial comparisons are complicated by the fact that dams are not randomly located, and temporal comparisons are commonly limited by sparse historic information. As a result, comparative approaches are often correlative and vulnerable to confounding factors. To complement these analyses, (6) flow or sediment modifications can be implemented to test causal associations. Finally, (7) process-based modeling represents a predictive approach incorporating hydrogeomorphic processes and their biological consequences. In a case study of Hells Canyon, the upstream versus downstream comparison is confounded by a dramatic geomorphic transition. Comparison of the multiple reaches below the dams should be useful, and the comparison of Snake River with the adjacent free-flowing Salmon River may provide the strongest spatial comparison. A pre- versus post-dam comparison would provide the most direct study approach, but pre-dam information is limited to historic reports and archival photographs. We conclude that multiple study approaches are essential to provide confident interpretations of ecological impacts downstream from dams, and propose a comprehensive study for Hells Canyon that integrates multiple research strategies.     

Connecticut statewide sTEP wave evaluation

INTRODUCTION: Selective Traffic Enforcement Programs (sTEPs) are a proven method to change motorists' behavior. Since 1997, the Connecticut DOT's Division of Highway Safety has organized a statewide seat belt enforcement program, with sTEP waves every three or four months. To date, 28 waves have been implemented. METHOD: Pre-wave and post-wave seat belt observation surveys are conducted by both state and municipal police across the state. Survey results, as well as a summary of all enforcement activity during the wave, are submitted for evaluation. RESULTS: Connecticut seat belt use has continued to rise from one wave to the next in a predictable "saw blade" pattern. CONCLUSIONS: The data clearly demonstrate that agencies that have participated in a greater number of waves have experienced the greatest increase in belt use. Belt use has not yet plateaued and additional sTEP enforcement seems indicated. However, evidence from other states suggests that a plateau may occur somewhere in the mid 80% range. IMPACT ON INDUSTRY: Should this occur, Connecticut will work toward strengthening the round the clock model, emphasizing the importance of aggressive primary enforcement.