Sustainable biofuels from algae

There is currently great interest in microalgae as sources of renewable energy and biofuels. Many algae species have a high lipid content and can be grown on non-arable land using alternate water sources such as seawater. This paper discusses in detail the issue of sustainability of commercial-scale microalgae production of biofuels with particular focus on land, water, nutrients (N and P) and CO₂ requirements and highlights some of the key issues in the very large scale culture of microalgae which is required for biofuels. The use of genetically modified algae is also considered.     

Dealing with disjunct concentration measurements in eddy covariance applications: A comparison of available approaches

Using proton transfer reaction mass spectrometry equipped with a quadrupol mass analyser to quantify the biosphere-atmosphere exchange of volatile organic compounds (VOC), concentrations of different VOC are measured sequentially. Depending on how many VOC species are targeted and their respective integration times, each VOC is measured at repeat rates on the order of a few seconds. This represents an order of magnitude longer sample interval compared to the standard eddy covariance (EC) method (5–20 Hz sampling rates). Here we simulate the effect of disjunct sampling on EC flux estimates by decreasing the time resolution of CO₂ and H₂O concentrations measured at 20 Hz above a temperate mountain grassland in the Austrian Alps. Fluxes for one month are calculated with the standard EC method and compared to fluxes calculated based on the disjunct data (1, 3 and 5 s sampling rates) using the following approaches: i) imputation of missing concentrations based on the nearest neighbouring samples (iDEC_nn), ii) imputation by linear interpolation (iDEC_li), and iii) virtual disjunct EC (vDEC), i.e. flux calculation based solely on the disjunct concentrations. It is shown that the two imputation methods result in additional low-pass filtering, longer lag times (as determined with the maximum cross-correlation method) and a flux loss of 3–30% as compared to the standard EC method. A novel procedure, based on a transfer function approach, which specifically corrects for the effect of data treatment, was developed, resulting in improved correspondence (to within 2%). The vDEC method yields fluxes which approximate the true (20 Hz) fluxes to within 3–7% and it is this approach we recommend because it involves no additional empirical corrections. The only drawback of the vDEC method is the noisy nature of the cross-correlations, which poses problems with lag determination – practical approaches to overcome this limitation are discussed.     

Development of SuperSmart Grids for a more efficient utilisation of electricity from renewable sources

If Europe is serious about reaching its target to keep global mean temperature increase below 2 °C, it must strive for a 100% renewable electricity system by 2050. The SuperSmart Grid approach combines what is often perceived as two exclusive alternatives: wide area power generation and decentralised power generation. We argue that by combining these, in fact, complementary measures, it is possible to address the crucial issue of renewable generation—fluctuating supply—in a comprehensive as well as in a technologically and economically viable manner. Thus, the SuperSmart Grid simultaneously can contribute to energy security, climate security, social security, and national security.     

Freisetzung von Schwermetallen aus dem bodenbildenden Tonmineral Illit durch Aminosäuren

Kaolin W from Lohrheim (51% Illite, 31% Kaolinite, 18% Quarz, no Carbon) was loaded with various amounts of heavy metal ions (0.11–6.0 mmol/100g Cu, Ni, Cd) from their nitrate solutions. In the next step the release of the bound metals was tested with or without aminoacids (penicillamine and histidine) in solutions of weak acidity or alkalinity. It was found an evident influence of the aminoacids to the metal release in dependence of metalcoating, metal-aminoacid-ratio and experimental pH. Especially in alkali environment a multiplication of the copper release (to a factor of 39 (pen) or 27 (his)) was observed. An increased nickel (factor 53) and cadmium release (factor 4.5) was found with histidine. In this cases 80 to 100% of the heavy metals were removed from the clay-mineral-surface.     

Production of natural and recycled aggregates: the environmental impacts of energy consumption and CO<Subscript>2</Subscript> emissions

Natural aggregates (NA) are crushed and processed in crushing plants after the extraction stage in quarries. In the present study, the aggregates are divided into three scenarios, depending on the production methods. The first scenario considers the production of NA, the second scenario deals with the production of recycled aggregates (RA) with respect to construction and demolition waste, and the third scenario, which is a hybrid scenario, handles the combination of NA and RA by assuming a 50% mixing percentage. In this research, we assess the environmental impacts on the production of aggregates via each scenario, using life cycle assessment; in addition, energy consumption and CO₂ emissions are considered as the environmental variables. We conclude that Iran’s current policy with an annual energy consumption of 1.48 million tons of oil equivalent (toe) can have a footprint of 2.88 million tons of CO₂ eq emissions per year (the first scenario). Achieving 30 and 36% reduction in annual energy consumption and CO₂ emissions, respectively, by the third scenario compared to the first scenario indicates the destructive effect of the first scenario from the environmental outlook.     

Diverging response patterns of terrestrial and aquatic species to hydromorphological restoration

Although experiences with ecological restoration continue to accumulate, the effectiveness of restoration for biota remains debated. We complemented a traditional taxonomic analysis approach with information on 56 species traits to uncover the responses of 3 aquatic (fish, macroinvertebrates, macrophytes) and 2 terrestrial (carabid beetles, floodplain vegetation) biotic groups to 43 hydromorphological river restoration projects in Germany. All taxonomic groups responded positively to restoration, as shown by increased taxonomic richness (10–164%) and trait diversity (habitat, dispersal and mobility, size, form, life history, and feeding groups) (15–120%). Responses, however, were stronger for terrestrial than aquatic biota, and, contrary to our expectation, taxonomic responses were stronger than those of traits. Nevertheless, trait analysis provided mechanistic insights into the drivers of community change following restoration. Trait analysis for terrestrial biota indicated restoration success was likely enhanced by lateral connectivity and reestablishment of dynamic processes in the floodplain. The weaker response of aquatic biota suggests recovery was hindered by the persistence of stressors in the aquatic environment, such as degraded water quality, dispersal constraints, and insufficient hydromorphological change. Therefore, river restoration requires combined local- and regional-scale approaches to maximize the response of both aquatic and terrestrial organisms. Due to the contrasting responses of aquatic and terrestrial biota, the planning and assessment of river restoration outcomes should consider effects on both components of riverine landscapes.