Characterization of aluminium-based water treatment residual for potential phosphorus removal in engineered wetlands

Aluminium-based water treatment residual (Al-WTR) is the most widely generated residual from water treatment facilities worldwide. It is regarded as a by-product of no reuse potential and landfilled. This study assessed Al-WTR as potential phosphate-removing substrate in engineered wetlands. Results indicate specific surface area ranged from 28.0 m² g⁻¹ to 41.4 m² g⁻¹. X-ray Diffraction, Fourier transform infrared and energy-dispersive X-ray spectroscopes all indicate Al-WTR is mainly composed of amorphous aluminium which influences its phosphorus (P) adsorption capacity. The pH and electrical conductivity ranged from 5.9 to 6.0 and 0.104 dS m⁻¹ to 0.140 dS m⁻¹ respectively, showing that it should support plant growth. Batch tests showed adsorption maxima of 31.9 mg P g⁻¹ and significant P removal was achieved in column tests. Overall, results showed that Al-WTR can be used for P removal in engineered wetlands and it carries the benefits of reuse of a by-product that promotes sustainability.     

On-going nitrification in chloraminated drinking water distribution system (DWDS) is conditioned by hydraulics and disinfection strategies

Within the drinking water distribution system (DWDS) using chloramine as disinfectant, nitrification caused by nitrifying bacteria is increasingly becoming a concern as it poses a great challenge for maintaining water quality. To investigate efficient control strategies, operational conditions including hydraulic regimes and disinfectant scenarios were controlled within a flow cell experimental facility. Two test phases were conducted to investigate the effects on the extent of nitrification of three flow rates (Q = 2, 6, and 10 L/min) and four disinfection scenarios (total Cl₂=1 mg/L, Cl₂/NH₃-N=3:1; total Cl₂=1 mg/L, Cl₂/NH₃-N=5:1; total Cl₂=5 mg/L, Cl₂/NH₃-N=3:1; and total Cl₂=5 mg/L, Cl₂/NH₃-N=5:1). Physico-chemical parameters and nitrification indicators were monitored during the tests. The characteristics of biofilm extracellular polymetric substance (EPS) were evaluated after the experiment. The main results from the study indicate that nitrification is affected by hydraulic conditions and the process tends to be severe when the fluid flow transforms from laminar to turbulent (2300<Re<4000). Increasing disinfectant concentration and optimizing Cl₂/NH₃-N mass ratio were found to inhibit nitrification to some extend when the system was running at turbulent condition (Q = 10 L/min, Re = 5535). EPS extracted from biofilm that was established at the flow rate of 6 L/min had greater carbohydrate/protein ratio. Furthermore, several nitrification indicators were evaluated for their prediction efficiency and the results suggest that the change of nitrite, together with total organic carbon (TOC) and turbidity can indicate nitrification potential efficiently.     

Potential influences of global warming on future climate and extreme events in Nigeria

This study investigates future impacts of global warming on climate and extreme climate events in Nigeria, the most populous African country that depends on rain-fed agriculture. Past and future climate simulations from 9 GCMs were downscaled (using a statistical model) and analyzed for the study. The study considers the impacts of two emission scenarios (B1 and A2) on the future climates (2046–2065 and 2081–2100) over ecological zones in Nigeria. The model evaluation shows that the downscaling adds values to the GCMs simulation, and the results capture all the important climatic features over the country. The model projections show that both B1 and A2 scenarios change the future climate over Nigeria. They significantly increase the temperature over all the ecological zones, with greatest warming (between 1 and 4 °C) over the Sudan (short grass) Savanna in March. The warming, which increases the occurrence of extreme temperature and heat wave events over the entire country, enhances the frequency of the extreme rainfall events in the south and southeast and reduces the annual rainfall over the northeast. Since heavy rains and floods are major problems in the south and southeast, and drought is major problem in the northeast, the global warming may further aggravate these environmental problems in future. These could have negative impacts on agriculture and further threaten livelihood and food security in the rapidly growing country. Hence, there is need for further studies on adaptation and mitigation strategies to address the impacts of global warming in Nigeria.     

Assessment of <Emphasis Type="Italic">Gmelina arborea</Emphasis> sawdust–cement-bonded rainwater storage tank

The performance of a mixture of a forest bye product and cement for the production of storage structure for harvested rainwater was assessed. Three mix ratios of Cement: Gmelina arborea sawdust 3.0:1.0 (specimen A), 2.5:1.0 (specimen B) and 2.0:1.0 (specimen C) were considered. Engineering properties and dimensional stability of the different mix-ratios were monitored from prototypes cylindrical pots and test billet specimens. Possible change in quality of stored rainwater, with time was monitored in all the three cases. Water quality parameters monitored include pH, hardness, total suspended solids, alkalinity, acidity and total dissolved CO₂. The tensile stress obtained were 110, 104, and 95 N/mm², while the compressive strength were 5,000, 3,000, and 2,000 kN for specimens A, B and C respectively. Accelerated aging test showed that sample A were more resistant to deformation, while specimen C were more susceptible to change in structure over time. Similarly, the values of tensile and compressive strength after accelerated aging test increased in the order of specimen A > B > C. Except in specimen C where significant differences in alkalinity and acidity were observed, there were no significant differences in quality of the water stored in the pots after 2 months of storage. The results indicate the suitability of the Gmelina arborea waste as an alternative in constructing water storage structures in rural communities.     

Technological trends in nanosilica synthesis and utilization in advanced treatment of water and wastewater

Environmental Science and Pollution Research - Water and wastewater treatment applications stand to benefit immensely from the design and development of new materials based on silica nanoparticles...     

Combined use of earthworm (Alma millsoni) and bacterium (Bacillus sp.) improved the bioremediation of spent engine oil contaminated soil

This study was carried out to assess the effectiveness of the combined use of earthworm (Alma millsoni) and bacterium (Bacillus sp.) in the bioremediation of spent engine oil (SEO) contaminated soils. A. millisoni were collected from the Botanical Garden of University of Ibadan, Nigeria. The stock culture of hydrocarbonoclastic Bacillus sp. was used for the bioremediation study. A set-up of eight pots containing 1000?g soil sample and 20?g of cow dung were mixed with 100, 75, 50 and 0?mL SEO respectively. Each of the set up was subjected to bioremediation agents; A. millisoni alone, Bacillus sp alone, A. millisoni and Bacillus sp, no treatment (control) in duplicate. Treatment of 100?ml SEO contaminated soil with combined A. millisoni and Bacillus sp resulted in significantly (P? bacterium > vermi-remediating agents. Earthworms exposed to 100?mLSEO-contaminated soil had higher CAT, SOD, and GPx activities compared to the control. Findings indicated that A. millisoni with Bacillus sp. can synergistically improve bioremediation of SEO contaminated soils.     

Leachability and leaching patterns from aluminium-based water treatment residual used as media in laboratory-scale engineered wetlands

Concept and purpose  

Virtually all water treatment facilities worldwide generate an enormous amount of water treatment residual (WTR) solids for which environmentally friendly end-use options are continually being sought as opposed to their landfilling. Aluminium-based WTR (Al-WTR) can offer huge benefits particularly for phosphorus (P) removal and biofilm attachment when used as media in engineered wetlands. However, potential environmental risks that may arise from the leaching out of its constituents must be properly evaluated before such reuse can be assured. This paper presents results of an assessment carried out to monitor and examine the leachability and leaching patterns of the constituents of an Al-WTR used as media in laboratory-scale engineered wetland systems.     

Rate modeling of CO2 stripping from potassium carbonate promoted by piperazine

This work presents results from a rate-based model of strippers at normal pressure (160 kPa) and vacuum (30 kPa) in Aspen Custom Modeler^® (ACM) for the desorption of CO₂ from 5 m K⁺/2.5 m piperazine (PZ). The model solves the material, equilibrium, summation and enthalpy (MESH) equations, the heat and mass transfer rate equations, and computes the reboiler duty and equivalent work for the stripping process. Simulations were performed with IMTP #40 random packing and a temperature approach on the hot side of the cross-exchanger of 5 °C and 10 °C. A “short and fat” stripper requires 7–15% less total equivalent work than a “tall and skinny” one because of the reduced pressure drop. The vacuum and normal pressure strippers require 230 s and 115 s of liquid retention time to get an equivalent work 4% greater than the minimum work. Stripping at 30 kPa was controlled by mass transfer with reaction in the boundary layer and diffusion of reactants and products (88% resistance at the rich end and 71% resistance at the lean end). Stripping at 160 kPa was controlled by mass transfer with equilibrium reactions (84% resistance at the rich end and 74% resistance at the lean end) at 80% flood. The typical predicted energy requirement for stripping and compression to 10 MPa to achieve 90% CO₂ removal was 37 kJ/gmol CO₂. This is about 25% of the net output of a 500 MW power plant with 90% CO₂ removal.     

Co-conditioning of the anaerobic digested sludge of a municipal wastewater treatment plant with alum sludge: benefit of phosphorus reduction in reject water.

In this study, alum sludge was introduced to co-conditioning and dewatering with an anaerobic digested sludge from a municipal wastewater treatment plant, to examine the role of the alum sludge in improving the dewaterbility of the mixed sludge and also in immobilizing phosphorus in the reject water. Experiments have demonstrated that the optimal mix ratio for the two sludges is 2:1 (anaerobic digested sludge:alum sludge: volume basis), and this can bring approximately 99% phosphorus reduction in the reject water through the adsorption of phosphorus by alum in the sludge. The phosphorus loading in wastewater treatment plants is itself derived from the recycling of reject water during the wastewater treatment process. Consequently, this co-conditioning and dewatering strategy can achieve a significant reduction in phosphorus loading in wastewater treatment plants. In addition, the use of the alum sludge has been shown to beneficially enhance the dewaterability of the resultant mixed sludge, by decreasing both the specific resistance to filtration and the capillary suction time. This is attributed to the alum sludge acting in charge neutralization and/or as adsorbent for phosphate in the aqueous phase of the sludge. Experiments have also demonstrated that the optimal polymer (Superfloc C2260, Cytec, Botlek, Netherlands) dose for the anaerobic digested sludge was 120 mg/L, while the optimal dose for the mixed sludge (mix ratio 2:1) was 15 mg/L, highlighting a huge savings in polymer addition. Therefore, from the technical perspective, the co-conditioning and dewatering strategy can be viewed as a "win-win" situation. However, for its full-scale application, integrated cost-effective analysis of process capabilities, sludge transport, increased cake disposal, additional administration, polymer saving, and so on, should be factored in.     

Dynamic heterogeneous analysis of pollution reduction in SANEM countries: lessons from the energy-investment interaction

Environmental Science and Pollution Research - This scientific enquiry examines the role of capital investment in the energy-pollution model in SANEM countries. The methodology is based on the...