Impact of economic capabilities and population agglomeration on PM2.5 emission: empirical evidence from sub-Saharan African countries

Environmental Science and Pollution Research - The utilization of economic capabilities to raise production in the economy enhances the industrial activities and use of transportation. These...     

Making spatial development scenario for south of Bushehr province,Iran, based on strategic foresight

In recent years, the science of foresight has been entered into planning activities by urban and regional planners and this science has impacted on planning activities. This study discusses spatial development in the south of Bushehr province using the foresight approach. The general aim of this research is to compile scenarios for the development of the mentioned study area which comprises the southern part of Bushehr province including four counties of Dayyer, Jam, Kangan and Asaluyeh. The main reason for selecting this region is their direct impressibility by major changes in the country’s oil and gas industry. This research has extremely made use of the Delphi and cross-impact analysis methods to develop foresight scenarios. Using the Delphi method, 30 initial factors were identified in the economic, political-security, linkages, science and technology, manufacturing, natural, social, infrastructural and residential issues and then the cross-impact matrix was used to investigate the impact of factors on each other. In the next step, the ranking of direct and indirect factors was determined by Micmac software and on this basis, the final refining in the selection of drivers was done. In the final stage, axes of future scenarios were presented and then the future scenarios were drawn. Results of this research indicate that two main drivers namely Iran’s international relations and energy resources are the main axes of scenarios. These two drivers have more uncertainty and higher importance than other factors and the results in four scenarios showing the possibility of each situation’s occurrence.     

Assessing groundwater quality and its sustainability in Joypurhat district of Bangladesh using GIS and multivariate statistical approaches

Sustainable groundwater quality is a key global concern and has become a major issue of disquiets in most parts of the world including Bangladesh. Hence, the assessment of groundwater quality is an important study to ensure its sustainability for various uses. In this study, a combination of multivariate statistics, geographical information system (GIS) and geochemical approaches was employed to evaluate the groundwater quality and its sustainability in Joypurhat district of Bangladesh. The results showed that the groundwater samples are mainly Ca–Mg–HCO₃ type. Principal component analysis (PCA) results revealed that geogenic sources (rock weathering and cation exchange) followed by anthropogenic activities (domestic sewage and agro-chemicals) were the major factors governing the groundwater quality of the study area. Furthermore, the results of PCA are validated using the cluster analysis and correlation matrix analysis. Based on the groundwater quality index (GWQI), it is found that all the groundwater samples belong to excellent to good water quality domains for human consumption, although iron, fluoride and iodide contaminated to the groundwater, which do not pose any significant health hazard according to World Health Organization’s and Bangladesh’s guideline values. The results of irrigation water quality index including sodium adsorption ratio (SAR), permeability index and sodium percentage (Na %) suggested that most of the groundwater samples are good quality water for agricultural uses. The spatial distribution of the measured values of GWQI, SAR, Fe (iron), EC (electrical conductivity) and TH (total hardness) were spatially mapped using the GIS tool in the study area.     

Cattle egrets as a biosentinels of persistent organic pollutants exposure

We investigated selected chlorinated pollutants (β-HCH, γ-HCH, DDDs, DDEs, o,p′-DDT, p,p′-DDT, heptachlor, aldrin, dieldrin, and endrin) in the Lahore and the Sialkot districts of Pakistan, using eggs of cattle egret (Bubulcus ibis) collected during May and June 2007. The pollutant with highest level and frequency was ΣDDT, followed by β-HCH, γ-HCH, heptachlor, aldrin, dieldrin, and endrin in descending order. The concentration(s) were significantly higher in Sialkot heronry for all the pollutants (except p,p′-DDT) than in Lahore. The values for DDTs, β-HCH, γ-HCH, and heptachlor were significantly higher (p < 0.05) in the egg(s) than in sediment(s) and in the chicks’ diet, due to biomagnification. Among DDTs analogues, p,p′-DDD was the major contaminant with >60 % of total DDT burden, reflecting the widespread aged as well as recent use of DDT as well as anaerobic degradation (DDD/DDE > 1 in many cases) in the nearby paddy soils. In few samples, p,p′-DDT/(DDD + DDE) > 0.5 suggested the recent emission patterns from surrounding contaminated areas of demolished DDT units and obsolete pesticide stores. The higher levels of HCHs (i.e., β-HCH) in the samples collected from Sialkot indicate exposure from long-term agricultural use. Overall, concentrations of all studied POPs were less than the threshold levels known to affect reproduction. Nevertheless, total DDTs and/or HCHs burdens in some eggs contained concentrations of greater than what would educe adverse effects on birds. This is among few studies on OCPs exposure to avian species, which provide the evidence of Pakistan’s contribution toward the Global POPs emission.     

Phytoavailability and potential transfer of Pb from a salt-affected soil to Atriplex verucifera,Salicornia europaea and Chenopodium album

The phytoavailability and potential transfer of Pb to Atriplex verucifera, Salicornia europaea and Chenopodium album in two calcareous soils with different salinity/sodicity were compared. The soils were spiked with 0, 250, 500 and 1000 mg Pb kg^?1 soil. Plant shoots were harvested and analysed for total Pb after they had been grown in the contaminated soils. Visual MINTEQ 3.0 was used to calculate the speciation of soluble Pb in the experimental soils. Results showed that although the concentrations of 1 M NH₄NO₃-extractable Pb were relatively similar, speciation of Pb in the soils were not the same. Salicornia europea was found to be the most salinity/sodicity-tolerant plant. When the plants were grown in non-saline soil, the Pb tolerance of the three plants was as follows: A. verucifera > C. album >S. europea, whereas in saline (sodic) soil, Pb tolerance was in the order S. europea > C. album > A. verucifera. Lead phytotoxicity to A. verucifera and C. album was higher in the saline soil, whereas for S. europea, Pb toxicity was higher in the non-saline soil. It could be concluded that the phytoavailability of Pb and its interactions with plants are widely dependent on soil salinity level and type of plant.     

Validation of plant based bioassays for the toxicity testing of Indian waters

Plant-based bioassays have recently gained remarkable popularity among the toxicological/eco-toxicological assessment procedures. The reasons for their wide use are comparative simplicity, sensitivity, and cost-effectiveness as well as a good correlation with other toxicity tests. The present study describes the use of two plant bioassays, Allium cepa test and seed germination test in the evaluation of the toxicity/genotoxicity of industrial waste water and river water and standardization with the commonly occurring pollutants in Indian waters namely heavy metals and phenolics. Both tests were standardized to suit the Indian conditions, and the local varieties were used. Both bioassays responded significantly with the test range of heavy metals and phenolics. The toxicity of heavy metals was in the order of Cu > Ni > Cd in both the tests whereas 2,4-dinitrophenol was the most toxic among the phenolic compounds. Cabbage, millet, and cucumber, respectively, were found to be the most sensitive in the seed germination test for the test heavy metals and phenols. Significant amounts of chromosomal abnormalities including bridges, stickiness, and fragmentations were recorded with both the industrial waste water and the XAD concentrated river water samples by A. cepa test.     

Aero-lap polishing of poly crystalline diamond inserts using Multicon media

Increasing use of poly crystalline diamond (PCD) inserts as cutting tools and wear parts is vividly seen in automobile, aerospace, marine and precision engineering applications. The PCD inserts undergo series of manufacturing processes such as: grinding that forms the required shape and polishing that gives a fine finish. These operations are not straight forward as PCD is extremely resistant to grinding and polishing. Single crystal diamond can easily be polished by choosing a direction of easy abrasion, but polishing a PCD imposes serious difficulties as the grains are randomly oriented. Prior research on polishing of PCD inserts includes electro discharge grinding (EDG), dynamic friction polishing and grinding by a vitrified bonded diamond wheel. The surface textures of PCD produced using an EDG process often contains: micro cavities, particle pullout, micro-grooves, chipped edges, cracks and gouch marks. While applying the dynamic friction polishing method the PCD material undergoes phase transformation and hence increased polishing rate was apparently seen. However the phase transformation of PCD deteriorates the strength of the insert. Furthermore the inserts produced using the dynamic polishing method often exhibits cracks, chip off and edge damage while using as a cutting tool. Therefore, a new method “aero-lap polishing” was attempted as it applies controlled amount of impinging force by which the surface damage can be significantly reduced. The study did establish an improvement of surface finish of PCD from R_a = 0.55 μm, R_t = 4.5 μm to R_a = 0.29 μm, R_t = 1.6 μm within 15–25 min of polishing time along with significant reduction in surface defects.     

Development and evaluation of air pollution–linked quality of life (AP-QOL) questionnaire: insight from two different cohorts

Environmental Science and Pollution Research - In this study, the air pollution–related quality of life (AP-QOL) questionnaire was carried out in two geographically and economically different...     

Modelling landscape effects on density-contact rate relationships of deer in eastern Alberta: Implications for chronic wasting disease

Managing wildlife diseases requires an understanding of disease transmission, which may be strongly affected by host population density and landscape features. Transmission models are typically fit from time-series disease prevalence data and modelled based on how the contact rate among hosts is affected by density, which is often assumed to be a linear (density-dependent transmission) or constant (frequency-dependent transmission) relationship. However, long-term time-series data is unavailable for emerging diseases, and this approach cannot account for independent effects of landscape. We developed a mechanistic model based on ecological data to empirically derive the contact rate-density relationship in white-tailed and mule deer in an enzootic region of chronic wasting disease (CWD) in Alberta, Canada and to determine whether it was affected by landscape. Using data collected from aerial surveys and GPS-telemetry, we developed empirical relationships predicting deer group size, home range size, and habitat selection to iteratively simulate deer distributions across a range of densities and landscapes. We calculated a relative measure of total per-capita contact rate, which is proportional to the number of other deer contacted per individual per unit time, for each distribution as the sum of pairwise contact rates between a target deer and all other individuals. Each pairwise contact rate was estimated from an empirical relationship developed from GPS-telemetry data predicting pairwise contact rates as a function of home range overlap and landscape structure. Total per-capita contact rates increased as a saturating function of density, supporting a transmission model intermediate between density- and frequency-dependent transmission. This pattern resulted from group sizes that reached an asymptote with increasing deer density, although this relationship was mediated by tree and shrub coverage in the landscape, such that in heavily wooded areas, the contact rate saturated at much lower densities. These results suggest that CWD management based on herd reductions, which require a density-dependent contact rate to be effective, may have variable effects on disease across a single management region. The novel mechanistic approach we employed for estimating effects of density and landscape on transmission is a powerful complement to typical data-fitting approaches for modelling disease transmission.     

GIS-based urban sustainability assessment: The case of Dammam city, Saudi Arabia

This paper applies an integrated approach to assessing urban sustainability in Dammam City, Saudi Arabia. The approach, based on geographic information systems (GIS), involves the evaluation of the planning process, the master plan and the land use activities resulting from planning. It concludes that some aspects of sustainability are not addressed by the planning process and the plan document. The planning process and the plan document addressed economic sustainability issues more than social and environmental issues. The result of the GIS-based sustainability assessment of the study area produces similar findings. The paper develops a sustainable planning guidance and makes some recommendations based on the findings.