Chemical characterization and health risk assessment of soil and airborne particulates metals and metalloids in populated semiarid region,Agra, India

Rapid industrialization and urbanization have contaminated air and soil by heavy metals and metalloids from biogenic, geogenic and anthropogenic sources in many areas of the world, either directly or indirectly. A case study was conducted in three different microenvironments, i.e., residential sites, official sites and official sites; for each sites, we choose two different locations to examine the elemental concentration in fine particulate matter and soil and health risk assessment. The concentration values of heavy metals and metalloid in the air and soil in the Agra region were measured using inductively coupled plasma-atomic emission spectrophotometry. The exposure factor and health risk assessment for carcinogenic and non-carcinogenic effects due to heavy metals and metalloid contaminants have been calculated for both children and adults by following the methodology prescribed by USEPA. For the elements As, Cr, Cd, Ni and Pb selected for the carcinogenic health risk assessment, the calculated results lie above the threshold ranges. We observed the lifetime exposure to heavy metals through mainly three pathways, ingestion, inhalation and dermal contact of soil and air from that particular area. Therefore, the overall hazard quotient (HQ) values for children are more than that of adults. The assessment of health risk signifies that there were mainly three exposure pathways for people: ingested, dermal contact and inhalation. The major exposure pathway of heavy metals to both children and adults is ingestion. The values of HQ are higher than the safe level (=1), indicating a high risk exists in present condition. Meanwhile, HQs value for children is higher than that for adults, indicating that children have higher potential health risk than adults in this region.

     

Analysis of stability of silica nano-particle-laden microbubble dispersion

Microbubbles are small gas-filled bubbles which have wide application in various industries. The stability of microbubble is of primary concern for the application of microbubble. In this research, the stability of microbubble dispersion generated using CTAB surfactant is analyzed by drainage mechanism. The stability of microbubble dispersion is studied on the basis of the half-life of microbubble dispersion. Microbubble dispersion gas fraction and apparent rise velocity of interface of microbubble dispersion are also calculated. The size of microbubble is estimated from the apparent rise velocity of interface of microbubble dispersion. Further, silica nano-particles are added to the surfactants to study their effect on the stability of microbubble dispersion. The observed results clearly indicate that the stability of microbubble dispersion is significantly affected by the surfactant concentration and the weight of silica nano-particle in the liquid. Similar results were observed for the apparent rise velocity of interface and bubble size of dispersion. The present work may be beneficial for the application of microbubble in various chemical and biochemical industries and scientific community.

     

Detecting diclofenac in livestock carcasses in India with an ELISA: a tool to prevent widespread vulture poisoning

Diclofenac, a non-steroidal anti-inflammatory drug (NSAID), has caused catastrophic vulture declines across the Indian sub-continent. Here, an indirect ELISA is used to detect and quantify diclofenac in 1251 liver samples from livestock carcasses collected across India between August 2007 and June 2008, one to two years after a ban on diclofenac manufacture and distribution for veterinary use was implemented. The ELISAs applicability was authenticated with independent data obtained using LC-ESI/MS. Of 1251 samples, 1150 (91.9%) were negative for diclofenac using both methods, and 60 (4.8%) were positive at 10-4348 and 10-4441 μg kg(-1) when analysed by ELISA and LC-ESI/MS, respectively. The residue level relationship in the 60 positive samples was highly significant (p < 0.001, r(2) = 0.644). Data suggest that this immunological assay could be used not only for cost effective sample screening, but also for residue level semi-quantification.     

Isolation of Thiobacillus sp from aerobic sludge of distillery and dairy effluent treatment plants and its sulfide oxidation activity at different concentrations

In the present study two strains of Thiobacillus sp were isolated from aerobic sludge of distillery and dairy effluent treatment plant using standard methods of isolation and enrichment. Experiments were conducted using isolated cultures in batch bioreactor with initial sulfide concentration of 75 and 150 mg/l. The effect of initial sulfide concentration on the activity of isolated Thiobacillus sp was studied. Sulfide oxidizing capacity was also determined at different initial sulfide concentrations. The results from the study indicate the possible isolation of Thiobacillus cultures from native source and application in the full-scale reactor     

Use of slag for dye removal

Adsorption techniques employing activated carbon have been found to be reasonably effective in the removal of some of the ionic impurities in water. However, economic considerations may require the use of inexpensive sorbents which are either naturally available or available as waste products from manufacturing processes. Slag is one such waste product obtained during the manufacture of steel, and the present study investigates dye removal characteristics of slag from colored waters. Aqueous solutions prepared from commercial grade acid, basic, and disperse dyes were used in this study, and batch pH, kinetic, and isotherm studies were undertaken on a laboratory scale. The data were evaluated for applicability to the Langmuir, Freundlich, and BET isotherm models, and the removal capacity of slag was compared with that of granular activated carbon. Results indicated approximately 94% removal of the disperse dye by slag, compared with a removal of approximately 49% achieved by activated carbon. Removal of acid dyes (dyes containing anionic groups) was reasonably good (approximately 47 and 74%), though not as good as obtained using activated carbon (approximately 100%). Column studies were conducted with a disperse dye (nonionic, slightly soluble in water), and analysis of data showed a sorption capacity of 1.3 mg of disperse dye per gram of slag. However, effluent dye concentrations were found to be higher than the permissible levels for discharge to receiving waters.     

Effect of marble dust on plants around Vishwakarma Industrial Area (VKIA) in Jaipur, India

The paper describes the effect of marble dust on plants in and around Vishwakarma Industrial Area (VKIA) Jaipur, Rajasthan (India). Trees species growing in and around VKIA area were selected and various morphological characteristics were studied such as leaf area dry weight ratio (LADWR), Dust retaining capacity (DRC) and Chlorophyll content. In the study the effects of marble dust on selected tree species was observed. LADWR was recorded maximunm 217.90 cm2 g(-1) dry wt. in Polyalthia longifolia in VKIA and minimum 98.74 cm2 g(-1) dry wt. in Ficus religiosa in Nindar whereas The DRC was observed maximum 178.51 mg cm(-2) in Azadirachta indica in VKIA as well as minimum recorded 66.41 mg cm(-2) in Thevetie pervvianain in Vidyadher Nagar. However the Total Chlorophyll Content was also determined and it was found maximum in Bougainvillea i.e. 2.949 mg g(-1) (fresh wt.) in VKIA whereas minimum for Nindar i.e. 0.784 mg g(-1) (fresh wt.) in Ficus religiosa.     

CO<Subscript>2</Subscript>-fertilization and potential future terrestrial carbon uptake in India

There is huge knowledge gap in our understanding of many terrestrial carbon cycle processes. In this paper, we investigate the bounds on terrestrial carbon uptake over India that arises solely due to CO ₂ -fertilization. For this purpose, we use a terrestrial carbon cycle model and consider two extreme scenarios: unlimited CO₂-fertilization is allowed for the terrestrial vegetation with CO₂ concentration level at 735 ppm in one case, and CO₂-fertilization is capped at year 1975 levels for another simulation. Our simulations show that, under equilibrium conditions, modeled carbon stocks in natural potential vegetation increase by 17 Gt-C with unlimited fertilization for CO₂ levels and climate change corresponding to the end of 21st century but they decline by 5.5 Gt-C if fertilization is limited at 1975 levels of CO₂ concentration. The carbon stock changes are dominated by forests. The area covered by natural potential forests increases by about 36% in the unlimited fertilization case but decreases by 15% in the fertilization-capped case. Thus, the assumption regarding CO₂-fertilization has the potential to alter the sign of terrestrial carbon uptake over India. Our model simulations also imply that the maximum potential terrestrial sequestration over India, under equilibrium conditions and best case scenario of unlimited CO₂-fertilization, is only 18% of the 21st century SRES A2 scenarios emissions from India. The limited uptake potential of the natural potential vegetation suggests that reduction of CO₂ emissions and afforestation programs should be top priorities.     

A ten channel fibre-optic device for distributed sensing of underground hydrocarbon leakage

With millions of fuel storage tanks and oil pipelines installed around the world, there is inevitably frequent leakage of potentially hazardous hydrocarbons. As many of these installations are below ground, it can often be many years before the extent of the leak is discovered. We have previously reported the development of a sensor for the detection of such subterranean leaks, using infrared reflectometry to interrogate a hydrocarbon sensitive membrane. However, a single sensor cannot provide any information about the flow rate or direction of the leak. This paper describes the extension of the technology to a multi-channel distributed sensing system, using optical fibres capable of distributing the sensors over large subterranean areas. Results are reported from the evaluation of the device, which consisted of monitoring the movement of different hydrocarbons (gasoline, diesel and insulating oil) through a vertical sand-filled vessel.     

A novel sensor for monitoring leakage of petroleum and other liquid hydrocarbons into soil environments

This paper describes the use of a potentially implantable infrared reflectometer for the qualitative detection of petroleum and a number of other hydrocarbon solvents. A rugged, low-power, re-useable sensor was evaluated in the laboratory for its ability to detect petrol in soil. A hydrophobic fluoropolymer was used as the sensing surface due to its high selectivity for petroleum hydrocarbons. The photocurrent reflected by this surface from a near IR source was measured to test for petroleum saturation within the membrane, which in turn was an indicator of petroleum in the surrounding soil. The simplicity in the sensor design enabled a stable, low cost detection method for petroleum and other hydrocarbons, ideal for use in sub-surface applications.     

Role of microbes,metabolites and effector compounds in host–microbiota interaction: a pharmacological outlook

Environmental Chemistry Letters - Microbial cells react with intestinal surfaces and produce enzymes and metabolites that influence&nbsp;human health, host metabolism and immunity. Gut...