Mass flows of perfluorinated compounds (PFCs) in central wastewater treatment plants of industrial zones in Thailand

Perfluorinated compounds (PFCs) are fully fluorinated organic compounds, which have been used in many industrial processes and have been detected in wastewater and sludge from municipal wastewater treatment plants (WWTPs) around the world. This study focused on the occurrences of PFCs and PFCs mass flows in the industrial wastewater treatment plants, which reported to be the important sources of PFCs. Surveys were conducted in central wastewater treatment plant in two industrial zones in Thailand. Samples were collected from influent, aeration tank, secondary clarifier effluent, effluent and sludge. The major purpose of this field study was to identify PFCs occurrences and mass flow during industrial WWTP. Solid-phase extraction (SPE) coupled with HPLC-ESI-MS/MS were used for the analysis. Total 10 PFCs including perfluorooctane sulfonate (PFOS), perfluorooctanoic acid (PFOA), perfluoropropanoic acid (PFPA), perfluorohexanoic acid (PFHxA), perfluoroheptanoic acid (PFHpA), perfluorohexane sulfonate (PFHxS), perfluoronanoic acid (PFNA), perfluordecanoic acid (PFDA), perfluoroundecanoic acid (PFUnA), and perfluorododecanoic acid (PFDoA) were measured to identify their occurrences. PFCs were detected in both liquid and solid phase in most samples. The exceptionally high level of PFCs was detected in the treatment plant of IZ1 and IZ2 ranging between 662-847 ng L⁻¹ and 674-1383 ng L⁻¹, respectively, which greater than PFCs found in most domestic wastewater. Due to PFCs non-biodegradable property, both WWTPs were found ineffective in removing PFCs using activated sludge processes. Bio-accumulation in sludge could be the major removal mechanism of PFCs in the process. The increasing amount of PFCs after activated sludge processes were identified which could be due to the degradation of PFCs precursors. PFCs concentration found in the effluent were very high comparing to those in river water of the area. Industrial activity could be the one of major sources of PFCs contamination in the water environment.     

Removal of estrogenic activity of natural steroidal hormone estrone by ligninolytic enzymes from white rot fungi

Natural steroidal hormone estrone (E1) was treated with the white rot fungus Phanerochaete sordida YK-624 under ligninolytic condition with low-nitrogen and high-carbon culture medium. E1 decreased by 98% after 5 d of treatment and the activities of ligninolytic enzymes, manganese peroxidase (MnP) and laccase, were detected during treatment, which suggested that the disappearance of E1 is related to ligninolytic enzymes produced extracellularly by white rot fungus. Therefore, E1 was treated with MnP and laccase prepared from the culture of white rot fungi. HPLC analysis demonstrated that E1 disappeared completely in the reaction mixture after 1 h of treatment with either MnP or laccase. Using the yeast two-hybrid assay system, it was also confirmed that both enzymatic treatments completely removed the estrogenic activity of E1 after 2 h. These results strongly suggest that ligninolytic enzymes are effective in removing the estrogenic activity of E1.     

Humic-like substances global levels and extraction methods in aerosols

Environmental Chemistry Letters - The abundance of humic-like substances in the atmosphere has received considerable attention since these substances play an important role in various atmospheric...     

Hidden ancient diversification in the circumtropical lancelet Asymmetron lucayanum complex

The tropical lancelet Asymmetron lucayanum (= Epigonichthys lucayanus) is distributed from the western Indian Ocean to the central Pacific Ocean, and the western Atlantic Ocean. Molecular phylogenetic analysis of mitochondrial cytochrome c oxidase subunit I (COI) sequences (1,035 bp) of A. lucayanum (80 specimens from seven localities) showed clearly that this species is genetically distinguished into three major groups of geographical populations based on neighbor-joining tree using maximum likelihood distance (HKY model with invariable sites and gamma correction), suggesting the existence of three cryptic species. Our genetic data show that (1) inter-oceanic divergence time between Clade B (the West-Central Pacific) and Clade C (the Atlantic) (d = 6.6%, ca. 12 million years ago) was smaller than intra-oceanic divergence time between Clade A (the Indo-West Pacific) and Clade B (d=39.5%, ca. 100 million years ago); (2) there are two cryptic species in the West Pacific in sympatry; and (3) high gene flow is implied between the Maldives and the Ryukyus in Clade A (10,000 km distance), the Philippines and Hawaii in Clade B (8,500 km distance), and Barbados and Bermuda in Clade C (2,200 km distance).     

Distribution of Poly(β-propiolactone) Aerobic Degrading Microorganisms in Different Environments

The distribution of degading microorganisms of high molecular weight poly(-propiolactone) (PPL), whose individual structural units are similar to those of poly(-hydroxybutyrate) (PHB) and poly(€-caprolactone) (PCL), was examined. Despite the fact that PPL is a chemosynthetic polymer, many kinds of PPL-degrading microorganisms were found to be distributed as resident populations widely in natural environments. A total of 77 strains of PPL-degrading microorganisms was isolated. From standard physiological and biochemical tests, at least 41 strains were referred to as Bacillus species. Microbial degradation of fibrous PPL proceeded rapidly in some enrichment cultures but was not as complete as that of PHB. Most of the isolated PPL-degrading microorganisms were determined to be PCL degraders and/or PHB degraders. Therefore, it can be assumed that mostly PPL is recognized by the microorganisms as PHB or another natural substrate of the same type as which PCL is regarded. Microbial degradation of PPL was confirmed by some Bacillus strains from type culture collections. The similarity of microbial degradation between PPL and PCL was found to be very close.     

Characterization of the genes involved in nitrogen cycling in wastewater treatment plants using DNA microarray and most probable number-PCR

To improve nitrogen removal performance of wastewater treatment plants (WWTPs), it is essential to understand the behavior of nitrogen cycling communities, which comprise various microorganisms. This study characterized the quantity and diversity of nitrogen cycling genes in various processes of municipal WWTPs by employing two molecular-based methods:most probable number-polymerase chain reaction (MPN-PCR) and DNA microarray. MPN-PCR analysis revealed that gene quantities were not statistically different among processes, suggesting that conventional activated sludge processes (CAS) are similar to nitrogen removal processes in their ability to retain an adequate population of nitrogen cycling microorganisms. Furthermore, most processes in the WWTPs that were researched shared a pattern:the nirS and the bacterial amoA genes were more abundant than the nirK and archaeal amoA genes, respectively. DNA microarray analysis revealed that several kinds of nitrification and denitrification genes were detected in both CAS and anaerobic-oxic processes (AO), whereas limited genes were detected in nitrogen removal processes. Results of this study suggest that CAS maintains a diverse community of nitrogen cycling microorganisms; moreover, the microbial communities in nitrogen removal processes may be specific.

Open image in new window

     

Melting and stone production using MSW incinerated ash

Most of the municipal solid waste (MSW) in Japan is incinerated and the generated ash is landfilled. However, environmental pollution problems have increased and Japan has decreased final disposal sites for landfills. With the application of a melting system, the volume of incinerated ash can be reduced and the effective use of melted slag is being developed for use in civil engineering works. However, the low strength of melted slag as a vitreous structure has limited its effective use. As a solution for this deficiency, a technology to crystallize melted slag into higher strength produced stones was developed. With the joint cooperation of Chiba Prefecture and Kamagaya City, a demonstration plant for melting and stone production with a capacity of 4.8 tons of incinerator ash per day was constructed. The demonstration test was conducted from May 1998 to June 1999 with satisfactory results stated below. Long-term stable operation and performance of the plant have been confirmed and effective applications of produced stones have been demonstrated on a commercial scale. The results are as follows. 1. A stable, continuous operation and good quality produced stones have been confirmed by treating more than 750 tons of MSW incinerated ash. 2. More than 99.9% of dioxins contained in the incinerated ash were decomposed, and the concentration of dioxins in produced stones were less than the detection limit set by Japanese environmental standards. 3. Leaching values of hazardous heavy metals of produced stones sufficiently met the environmental standard on soil pollution of the Environment Agency with superior leaching behavior for the vitreous slag, thus confirming their safe applications. 4. The effective application of produced stones for aggregate was tested based on Japanese Industrial Standards and every figure of test results met the Japanese standard values. The use of produced stones as raw materials for permeable pavement blocks has been confirmed in commercial construction for a park in Chiba Prefecture. Asphalt use was also demonstrated by paving a commercial roadway in Kamagaya City.