Fast,cheap, and imperfect? US public opinion about solar geoengineering

ABSTRACT

Solar geoengineering, which seeks to cool the planet by reflecting a small fraction of sunlight back into space, has drawn the attention of scientists and policymakers as climate change remains unabated. Unlike mitigation, solar geoengineering could quickly and cheaply lower global temperatures. It is also imperfect. Its environmental impacts remain unpredictable, and its low cost and immediate effects may result in ‘moral hazard,’ potentially crowding out costly mitigation efforts. There is little understanding about how the public will respond to such tradeoffs. To address this, a 1000-subject nationally representative poll focused on solar geoengineering was conducted as part of the Cooperative Congressional Election Study (CCES) of the US electorate in October–November 2016. The importance that individuals place on solar geoengineering’s speed and cost predicts their support for it, but there is little to no relationship between their concerns about its shortcomings and support for its research and use. Acquiescence bias appears to be an important factor for attitudes around solar geoengineering and moral hazard.     

Transport of Pollutant in Open Channel with Short Waves

This study examines the effect of short period water waves on the longitudinal mixing of pollutants in open channel flow. These waves create orbital motions and therefore increase the magnitude of the dispersion coefficient. Experiments are conducted for non-wavy and wavy flow. The values of the longitudinal dispersion coefficients are determined by applying the method of least squares to the measured solute concentrations at various time intervals. For non-wavy flow, the measured values of longitudinal dispersion coefficient match closely with those computed from the empirical equation given by Seo [1]. For wavy flow, a new factor called the wave parameter (a/TU _*, a=wave amplitude, T=wave period, U _*=shear velocity) is found important and a nonlinear multiple regression analysis is used to derive a new expression for the wave induced longitudinal dispersion coefficient (WILDC). An uncertainty analysis is conducted as per IS Code 5168 and the confidence interval is determined. Linear water wave theory is applied to modify the existing expression of the longitudinal dispersion coefficient of Seo [1] by including the effect of short waves. A mathematical model for WILDC is then developed. Comparative study between wavy and non-wavy flow cases has been conducted. The results clearly show an increase in the magnitude of longitudinal dispersion coefficient in the presence of waves.     

Large inter annual variation in air quality during the annual festival ‘Diwali' in an Indian megacity

A network of air quality and weather monitoring stations was established under the System of Air Quality Forecasting and Research(SAFAR) project in Delhi. We report observations of ozone(O_3), nitrogen oxides(NO_x), carbon monoxide(CO) and particulate matter(PM_2.5and PM_(10)) before, during and after the Diwali in two consecutive years, i.e., November 2010 and October 2011. The Diwali days are characterised by large firework displays throughout India. The observations show that the background concentrations of particulate matter are between 5 and 10 times the permissible limits in Europe and the United States. During the Diwali-2010, the highest observed PM_(10) and PM_2.5mass concentration is as high as2070 μg/m~3 and 1620 μg/m3, respectively(24 hr mean), which was about 20 and 27 times to National Ambient Air Quality Standards(NAAQS). For Diwali-2011, the increase in PM_(10) and PM_2.5mass concentrations was much less with their peaks of 600 and of 390 μg/m~3 respectively, as compared to the background concentrations. Contrary to previous reports,firework display was not found to strongly influence the NO_x, and O_3 mixing ratios, with the increase within the observed variability in the background. CO mixing ratios showed an increase. We show that the large difference in 2010 and 2011 pollutant concentrations is controlled by weather parameters.     

Environmental quality assessment of Port Blair in Andaman islands

The Andman and Nicobar archipelago comprises of about 556 small and big islands covering an area of 8493 sq. kms in the Bay of Bengal. The very remoteness of these islands from the mainland has preserved their pristine environment and spectacular natural beauty. The Andman and Nicobar Administration is going for major developmental projects to cope with the increasing needs of the people, which ultimately results in significant changes in environmental quality. This paper describes the existing environmental quality around Port Blair city, which will give baseline scenario to assess the environmental impacts due to developments in the future.In order to monitor the air quality of the region, sampling stations were selected based on the locations of various industries and domestic activities. Suspended Particulate Matter (SPM), Sulphur dioxide (SO₂) and Nitrogen Oxides (NOx) were monitored for a period of one month during winter season. In addition, micrometeorological data, viz. wind speed and direction were also recorded and analysed to obtain the representative meteorological scenario of the air basin. The monitored values of ambient air quality was found to be within the NAAQ standards of India.Similarly, noise levels were also measured at various locations viz., residential areas, commercial centres, villages, stone quarry sites and construction sites. Noise levels were found to exceed the standards at stone quarry, construction sites and other locations.Water quality studies were carried out with respect to surface and ground water. The various physico- chemical and bacteriological parameters were analysed. It was observed that the physico-chemical parameters of surface and ground water lie within the standards stipulated for Indian subcontinent except for heavy metals which exceed the limits in ground water samples. Bacteriological analysis of sea water and ground water indicate that they are contaminated with faecal matters. Further, the ground water can be used for drinking purposes only after adequate treatment.     

Removal of arsenic from water by electrocoagulation

In the present study electrocoagulation (EC) has been evaluated as a treatment technology for arsenite [As(III)] and arsenate [As(V)] removal from water. Laboratory scale experiments were conducted with three electrode materials namely, iron, aluminum and titanium to assess their efficiency. Arsenic removal obtained was highest with iron electrodes. EC was able to bring down aqueous phase arsenic concentration to less than 10 microgl(-1) with iron electrodes. Current density was varied from 0.65 to 1.53 mAcm(-2) and it was observed that higher current density achieved rapid arsenic removal. Experimental results at different current densities indicated that arsenic removal was normalized with respect to total charge passed and therefore charge density has been used to compare the results. Effect of pH on arsenic removal was not significant in the pH range 6-8. Comparative evaluation of As(III) and As(V) removal by chemical coagulation (with ferric chloride) and electrocoagulation has been done. The comparison revealed that EC has better removal efficiency for As(III), whereas As(V) removal by both processes was nearly same. The removal mechanism of As(III) by EC seems to be oxidation of As(III) to As(V) and subsequent removal by adsorption/complexation with metal hydroxides generated in the process.     

Influence of mercury from fly ash on cattle reared nearby thermal power plant

Cattle grazing nearby coal-fired power stations are exposed to fly ash. The present investigation aims to assess the environmental and health impacts of fly ash containing mercury emitted from thermal power plant. The health effect of fly ash were studied using 20 lactating cattle reared within a 5-km radius of s thermal power plant for the possible effect of fly ash such as the alterations in hematological and biochemical parameters of blood, milk, and urine. Results indicated that the hemoglobin levels (6.65?±?0.40?g/dl) were significantly reduced in all the exposed animals. Biochemical parameters viz., blood urea nitrogen (27.35?±?1.19?mg/dl), serum glutamate oxaloacetate transaminase (43.39?±?3.08?IU/l), albumin, and creatinine were found to be increased, whereas serum glutamate pyruvic transaminase (29.26?±?2.02) and Ca²⁺ were observed to be statistically insignificant in exposed animals. Mercury concentrations estimated in the blood, milk, and urine of exposed (n?=?20) and control (n?=?20) animals were 7.41?±?0.86, 4.75?±?0.57, 2.08?±?0.18, and 1.05?±?0.07, 0.54?±?0.03, 0.20?±?0.02?μg/kg, respectively. The significant increase (P?<?0.01) in the levels of mercury in blood, milk, and urine of exposed animals in comparison to control indicated that the alterations of biochemical parameters in exposed cattle could be due to their long term exposure to fly ash mercury which may have direct or indirect impact on human populations via food chain.     

Measurements of nitrogen oxides from Hudson Bay: Implications for NOx release from snow and ice covered surfaces

Measurements of NO and NO₂ were made at a surface site (55.28 °N, 77.77 °W) near Kuujjuarapik, Canada during February and March 2008. NO_x mixing ratios ranged from near zero to 350 pptv with emission from snow believed to be the dominant source. The amount of NO_x was observed to be dependent on the terrain over which the airmass has passed before reaching the measurement site. The 24 h average NO_x emission rates necessary to reproduce observations were calculated using a zero-dimensional box model giving rates ranging from 6.9 × 10⁸ molecule cm^?2 s^?1 to 1.2 × 10⁹ molecule cm^?2 s^?1 for trajectories over land and from 3.8 × 10⁸ molecule cm^?2 s^?1 to 6.6 × 10⁸ molecule cm^?2 s^?1 for trajectories over sea ice. These emissions are higher than those suggested by previous studies and indicate the importance of lower latitude snowpack emissions. The difference in emission rate for the two types of snow cover shows the importance of snow depth and underlying surface type for the emission potential of snow-covered areas.     

High bromine oxide concentrations in the semi-polluted boundary layer

Bromine chemistry in the marine boundary layer is recognized to play an important role through catalytic ozone destruction, changes to the atmospheric oxidising capacity (by changing the OH/HO₂ and NO/NO₂ ratio) and oxidation of compounds such as dimethyl sulphide (DMS). However, the chemistry of bromine in polluted environments is not well understood and its effects are thought to be inhibited by reactions involving NO_x (NO₂ & NO). This paper describes long-path Differential Optical Absorption Spectroscopy (DOAS) observations of bromine oxide (BrO) at a semi-polluted coastal site in Roscoff, France. Significant concentrations of BrO (up to 7.5 ± 1.0 pptv) were measured during daytime, indicating the presence of unknown sources or efficient recycling of reactive bromine from bromine nitrate (BrONO₂), which should be the major reservoir for bromine in a high NO_x environment. These measurements indicate that bromine chemistry can play an important role in polluted environments.