Preparation of Viscose Fibres Stripped of Reactive Dyes and Wrinkle-Free Crosslinked Cotton Textile Finish

The chemical recycling of cellulosic fibres may represent a next-generation fibre–fibre recycling system for cotton textiles, though remaining challenges include how to accommodate fibre blends, dyes, wrinkle-free finishes, and other impurities from finishing. These challenges may disrupt the regeneration process steps and reduce the fibre quality. This study examines the impact on regenerated viscose fibre properties of a novel alkaline/acid bleaching sequence to strip reactive dyes and dimethyloldihydroxyethyleneureas (DMDHEU) wrinkle-free finish from cotton textiles. Potentially, such a bleaching sequence could advantageously be integrated into the viscose process, reducing the costs and environmental impact of the product. The study investigates the spinning performance and mechanical properties (e.g., tenacity and elongation) of the regenerated viscose fibres. The alkaline/acid bleaching sequence was found to strip the reactive dye and DMDHEU wrinkle-free finish from the cotton fabric, so the resulting pulp could successfully be spun into viscose fibres, though the mechanical properties of these fibres were worse than those of commercial viscose fibres. This study finds that reactive dyes and DMDHEU wrinkle-free finish affect the viscose dope quality and the regeneration performance. The results might lead to progress in overcoming quality challenges in cellulosic chemical recycling.     

Quantification of copepod gut content by differential length amplification quantitative PCR (dla-qPCR)

Quantification of feeding rates and selectivity of zooplankton is vital for understanding the mechanisms structuring marine ecosystems. However, methodological limitations have made many of these studies difficult. Recently, molecular based methods have demonstrated that DNA from prey species can be used to identify zooplankton gut contents, and further, quantitative gut content estimates by quantitative PCR (qPCR) assays targeted to the 18S rRNA gene have been used to estimate feeding rates in appendicularians and copepods. However, while standard single primer based qPCR assays were quantitative for the filter feeding appendicularian Oikopleura dioica, feeding rates were consistently underestimated in the copepod Calanus finmarchicus. In this study, we test the hypothesis that prey DNA is rapidly digested after ingestion by copepods and describe a qPCR-based assay, differential length amplification qPCR (dla-qPCR), to account for DNA digestion. The assay utilizes multiple primer sets that amplify different sized fragments of the prey 18S rRNA gene and, based on the differential amplification of these fragments, the degree of digestion is estimated and corrected for. Application of this approach to C. finmarchicus fed Rhodomonas marina significantly improved quantitative feeding estimates compared to standard qPCR. The development of dla-qPCR represents a significant advancement towards a quantitative method for assessing in situ copepod feeding rates without involving cultivation-based manipulation.     

Corrosion-induced release of the main alloying constituents of manganese-chromium stainless steels in different media

The main focus of this paper is the assessment of release rates of chromium, nickel, iron and manganese from manganese-chromium stainless steel grades of low nickel content. The manganese content varied between 9.7 and 1.5 wt% and the corresponding nickel content between 1 and 5 wt%. All grades were exposed to artificial rain and two were immersed in a synthetic body fluid of similar pH but of different composition and exposure conditions. Surface compositional studies were performed using X-ray photoelectron spectroscopy (XPS) in parallel to correlate the metal release process with changes in surface oxide properties. All grades, independent of media, revealed a time-dependent metal release process with a preferential low release of iron and manganese compared to nickel and chromium while the chromium content of the surface oxide increased slightly. Manganese was detected in the surface oxide of all grades, except the grade of the lowest manganese bulk content. No nickel was observed in the outermost surface oxide. Stainless steel grades of the lowest chromium content (approximately 16 wt%) and highest manganese content (approximately 7-9 wt%), released the highest quantity of alloy constituents in total, and vice versa. No correlation was observed between the release rate of manganese and the alloy composition. Released main alloy constituents were neither proportional to the bulk alloy composition nor to the surface oxide composition.     

Corrosion-induced release of Cu and Zn into rainwater from brass, bronze and their pure metals. A 2-year field study

A 2-year field study has been conducted in an urban environment to provide annual release rates of copper and zinc from brass (20 wt% Zn) and copper and tin from bronze (6 wt% Sn) compared to sheets of their pure alloy constituents, copper and zinc. Despite relatively low nominal bulk alloy content, substantially more zinc was released from brass compared to copper. Both metals were released at a significantly slower rate from the brass alloy, compared to the pure metals. The proportion of release rates of copper and zinc from the alloy differed significantly from their proportions in the bulk alloy. Bronze showed relatively constant release rates of copper, being similar to that of pure copper sheet. The release of tin from bronze was negligible. The results clearly show that alloys and the pure metals behave very differently when exposed to rainwater. Accordingly, release rates from pure metals cannot be used to predict release rates of individual constituents from their alloys. Generated data are of importance within REACH, the new chemical policy of the European commission, where metal alloys erroneously are being treated as mixtures of chemical substances.     

Divergent neighbors: corporatism and climate policy networks in Finland and Sweden

ABSTRACT

Previous research has suggested that corporatist polities tend to enact more ambitious environmental policies than others. Here it is argued that the macro concept of corporatism can be dissected into three components: inclusiveness, consensualism and strength of tripartite organisations. These components of corporatism can be measured at the meso-level of policy networks. It is proposed that inclusiveness and consensualism are related to ambitious climate policy but exclusive tripartite coalitions can be detrimental for the ambitiousness of climate policy. This argument is backed by evidence from policy network surveys in two similar corporatist countries where climate change policies diverge: Sweden, where policies are ambitious, and Finland, where they are less so. It is found that in Sweden the climate change policy network is more consensual and slightly more inclusive, while in Finland tripartite organisations play a strong role.     

In vitro studies of copper release from powder particles in synthetic biological media

The aim of this paper is to provide quantitative data on copper release from powder particles of different copper materials, including artificial copper patina, Cu(2)O and metallic Cu, when exposed to different synthetic biological media to simulate an inhalation scenario and/or skin contact. Generated data may contribute in risk assessment of potential health effects following exposure to and handling of various copper materials. All tests were performed in vitro to determine total copper concentrations, release rates of total copper, and to elucidate its time-dependence. The copper release process was interpreted in terms of specific surface area, surface morphology-, and composition. All powder materials show a time-dependent release process with total copper release rates less than 3 microg/cm(2) per hour at steady state conditions, for all media investigated. The importance of using relevant test media when simulating different interstitial lung conditions and difficulties encountered when comparing powder particles of essentially different properties are thoroughly discussed.     

Effects of ocean acidification, temperature and nutrient regimes on the appendicularian Oikopleura dioica: a mesocosm study

Increasing pCO₂ is hypothesized to induce shifts in plankton communities toward smaller cells, reduced carbon export rates and increased roles of gelatinous zooplankton. Appendicularians, among the most numerous pan-global “gelatinous” zooplankton, continuously produce filter-feeding houses, shortcutting marine food webs by ingesting submicron particles, and their discarded houses contribute significantly to carbon fluxes. We present a first mesocosm-scale study on the effects of temperature, pCO₂ and bloom structures on the appendicularian, Oikopleura dioica. There were effects of temperature and nutrients on phytoplankton communities. No shifts in functional phytoplankton groups, nor changes in particle sizes/morphotypes, known to impact appendicularian feeding, were observed under manipulated pCO₂ conditions. However, appendicularian abundance was positively correlated with increased pCO₂, temperature and nutrient levels, consistent with hypotheses concerning gelatinous zooplankton in future oceans. This suggests appendicularians will play more important roles in marine pelagic communities and vertical carbon transport under projected ocean acidification and elevated temperature scenarios.     

Predictive models of copper runoff from external structures

A general model for annual runoff rate predictions of total copper from naturally patinated copper on buildings at specific urban or rural sites of low chloride influence has been deduced from laboratory and field data. All parameters within the model have a physical meaning and include the average annual rain acidity (pH), the annual rain quantity and the geometry of a building in terms of surface inclination. In 70% of all reported annual runoff rates, the predicted values are within 30% from the observed values. The individual and interactive effect of rain composition in terms of pH, sulfate, chloride and nitrate concentration was investigated in immersion experiments in artificial rain water representative of urban and rural sites of Europe. The results show pH to have a dominating effect on patina dissolution, nitrate to have a small inhibiting effect, whereas no significant effect was seen for chloride and sulfate. In case pH data are not available, a model has been statistically deduced from field data by considering SO2 as influencing parameter, rather than pH. The predictability with the SO2 model is not as good as with the pH model i.e. the pH model should preferentially be used since it is a better predictor and all parameters within the model can be physically explained.     

A Comparison Between Regression Models and Genetic Programming for Predictions of Chlorophyll-a Concentrations in Northern Lakes

Chlorophyll-a (chl-a) concentrations are often used as a proxy for water quality problems as well as phytoplankton blooms. Available chl-a models range from simple phosphorus loading models to complex regression and dynamic models. A comparison of multiple regression models was made with genetic programming (GP) techniques to predict chl-a concentrations over a large range of 104 Swedish lakes. Independent variables used were lake area, mean depth, iron, latitude, ammonium, nitrogen + nitrate, pH, phosphate, secchi depth, silicon, temperature, total phosphorus, total nitrogen and total organic carbon. GP is a method based on the Darwinian evolution theory. This implies that a program will be able to test different mathematical equations, iterating and improving each equation using fundamental ideas from evolution theory to increase the predictive power. A good correspondence was found between the multiple regression and the GP modelling approach. No significant improvement of the predictive power was found using GP, and it is therefore recommended that multiple regression methods should be preferred when predicting chl-a concentrations as these models tend to be less complex and the modelling approach is easier to use. Results from GP were in some cases more accurate compared to multiple regressions; however, the best model was created by multiple regressions which used concentrations of total phosphorus, total nitrogen and latitude as independent variables. These findings will be an important note for limnologists and modelling managers when developing future models of chl-a concentrations in lakes.     

Quantitative PCR to estimate copepod feeding

Copepods play a central role in marine food webs as grazers of plankton and as key prey for many predators. Therefore, quantifying their specific trophic interactions is critical for understanding the role of copepods in ocean processes. However, because of methodological constraints, it remains difficult to investigate in situ copepod feeding without reliance on laborious intrusive and potentially biased incubation approaches. Recent advances in PCR-based methodologies have demonstrated the feasibility of directly identifying copepod diets based on prey DNA sequences. Yet, obtaining quantitative information from these approaches remains challenging. This study presents results of systematic efforts to develop a quantitative PCR (qPCR) assay targeted to 18S rRNA gene fragments to estimate copepod gut content of specific species of prey algae. These results were first compared to gut content estimates based on fluorescence in the copepod Calanus finmarchicus fed monocultures of two different microalgae species in controlled laboratory studies. In subsequent field studies, we compared feeding rates obtained by microscopy and qPCR for Temora longicornis and Acartia clausi feeding on the haptophyte Phaeocystis globosa in natural blooms. These investigations demonstrate a semi-quantitative relationship between gut content estimates derived from qPCR, gut pigment, and direct microscopy. However, absolute estimates of gut content based on qPCR methodology were consistently lower than expected. This did not appear to be explained by the extraction methods used, or interference by non-target (predator) DNA in the PCR reactions, instead suggesting digestion of prey-specific nucleic acids. Furthermore, the 18S rDNA target gene copy number of the phytoplankton varied with growth phase. Nonetheless, when prey target gene copy number in the ambient water is quantified, the qPCR-approach can be compared to other methods, and then used to semi-quantitatively estimate relative copepod grazing on specific prey in situ without involving further incubations. A distinct advantage of a DNA-based molecular approach compared to gut fluorescence and direct microscopic observation, is the ability to detect non-pigmented and macerated prey. Future studies should aim to correct for breakdown in prey DNA and perform extensive calibrations to other methods in order to achieve a quantitative measure of feeding rates in situ.