Legacy and alternative halogenated flame retardants in Lake Geneva fish

Environmental Science and Pollution Research - Legacy (i.e., polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecane (HBCDD)) and alternative halogenated flame retardants (HFRs) were...     

Development of visibility forecasting modeling framework for the Lower Fraser Valley of British Columbia using Canada’s Regional Air Quality Deterministic Prediction System

Visibility degradation, one of the most noticeable indicators of poor air quality, can occur despite relatively low levels of particulate matter when the risk to human health is low. The availability of timely and reliable visibility forecasts can provide a more comprehensive understanding of the anticipated air quality conditions to better inform local jurisdictions and the public. This paper describes the development of a visibility forecasting modeling framework, which leverages the existing air quality and meteorological forecasts from Canada’s operational Regional Air Quality Deterministic Prediction System (RAQDPS) for the Lower Fraser Valley of British Columbia. A baseline model (GM-IMPROVE) was constructed using the revised IMPROVE algorithm based on unprocessed forecasts from the RAQDPS. Three additional prototypes (UMOS-HYB, GM-MLR, GM-RF) were also developed and assessed for forecast performance of up to 48 hr lead time during various air quality and meteorological conditions. Forecast performance was assessed by examining their ability to provide both numerical and categorical forecasts in the form of 1-hr total extinction and Visual Air Quality Ratings (VAQR), respectively. While GM-IMPROVE generally overestimated extinction more than twofold, it had skill in forecasting the relative species contribution to visibility impairment, including ammonium sulfate and ammonium nitrate. Both statistical prototypes, GM-MLR and GM-RF, performed well in forecasting 1-hr extinction during daylight hours, with correlation coefficients (R) ranging from 0.59 to 0.77. UMOS-HYB, a prototype based on postprocessed air quality forecasts without additional statistical modeling, provided reasonable forecasts during most daylight hours. In terms of categorical forecasts, the best prototype was approximately 75 to 87% correct, when forecasting for a condensed three-category VAQR. A case study, focusing on a poor visual air quality yet low Air Quality Health Index episode, illustrated that the statistical prototypes were able to provide timely and skillful visibility forecasts with lead time up to 48 hr.

Implications: This study describes the development of a visibility forecasting modeling framework, which leverages the existing air quality and meteorological forecasts from Canada’s operational Regional Air Quality Deterministic Prediction System. The main applications include tourism and recreation planning, input into air quality management programs, and educational outreach. Visibility forecasts, when supplemented with the existing air quality and health based forecasts, can assist jurisdictions to anticipate the visual air quality impacts as perceived by the public, which can potentially assist in formulating the appropriate air quality bulletins and recommendations.     

One-Component Spray Polyurethane Foam from Liquefied Pinewood Polyols: Pursuing Eco-Friendly Materials

The use of petroleum-derived products should be avoided regarding the principles of green and sustainable chemistry. The work reported herein, is aimed at the liquefaction of pine shavings for the production of an environmentally-friendly polyol suitable to be used in the formulations of sprayable polyurethane foams. The biopolyols were obtained in high yield and were used to replace those derived from fossil sources, to produce more “greener” polyurethane foams and therefore, less dependent on petroleum sources, since the polyol component was substituted by products resulting from biomass liquefaction. The partial and fully exchange of the polyols was accomplished, and the results compared with a reference foam. The foams were afterward, chemical, physical, morphological, and mechanically characterized. The complete replacement of polyether polyol and polyol polyester has presented some similar characteristics as that used as a reference, validating that the path chosen for the development of more sustainable materials is on the right track for the contribution to a cleaner world.     

Analysis and residue levels of forchlorfenuron (CPPU) in watermelons

This paper describes the application of liquid chromatography-tandem mass spectrometry (LC/MS-MS) for analysis of residues of forchlorfenuron (CPPU), a new plant growth regulator, in watermelons, after a sample preparation step based on the buffered Quick, Easy, Cheap, Effective, Rugged and Safe extraction method. Analytical determinations were carried out in a triple quadrupole system fitted with an electrospray interphase operating in the positive ionisation mode (ESI+). Three simultaneous MS-MS transitions of the quasi-molecular ion m/z 248 (precursor ion) were monitored for data acquisition (248 > 129, 248 > 155, and 248 > 248), using the transition 248 > 129 for quantitation. Recovery studies on watermelons at levels of 1-200 microg/kg, performing five replicates at each level and using bracketing single-level calibration with matrix-matched standards for quantitation, gave forchlorfenuron mean recoveries ranging from 82 to 106% with relative standard deviations (RSD) lower than 18%. The limit of determination was established at 1 microg/kg. The method was applied to evaluate the persistence of forchlorfenuron residues in watermelons grown in plastic greenhouses, after applying an individual spray treatment to the flower ovary at the anthesis stage (45 mu g/flower and 60 mu g/flower for cv "Extazy" and cv "reina de corazones" watermelons, respectively). One month after treatment, 20 "Extazy" watermelon units (1.5-2 kg/unit) and 20 "Reina de corazones" watermelon units (4-5 kg/unit) were collected and analyzed individually. None of the samples contained forchlorfenuron residues higher than 1 microg/kg.     

Health and environmental assessment of mercury exposure in a gold mining community in Western Mindanao, Philippines

The small-scale gold mining activities using mercury began in the late 1980s in Sibutad, Western Mindanao. It is located very near the Murcielagos Bay with tailing ponds directly discharging into bodies of water. This cross-sectional study aimed to determine the health and environmental effects of gold mining activities on the community. Residents were randomly selected and classified into two groups, namely, the directly exposed and indirectly exposed populations using a set inclusion criteria. Complete medical and laboratory examinations were performed. Environmental and biologic samples were collected for total mercury and methylmercury determinations. The results showed that the directly exposed group had significantly higher mean blood total mercury and methylmercury levels in comparison with the indirectly exposed population. Although there were no significant differences between hair total mercury and methylmercury levels, there was a trend for higher levels of these biomarkers among the directly exposed residents as compared with the unexposed group. The absence of statistically significant differences may be attributable to the small sample size. Ambient air quality monitoring for mercury exceeded the allowable levels. However, levels of mercury in drinking water and sediments were within allowable limits. Frequency of gastrointestinal complaints was significantly associated with elevated hair methylmercury levels (p=0.02). Also, there appears to be a trend towards higher blood total mercury levels and frequency of gastrointestinal complaints (p=0.09). An interesting finding in this study was the increasing incidence of elevated diastolic blood pressure with elevated hair total mercury levels (p=0.07). Mercury storage at home is a risk factor.     

Accumulation of metals in the soil of an overland flow wastewater treatment system

Accumulation of Co, Cu, Cr, Mo, Ni, Pb and Zn was evaluated in a soil profile of an overland flow system used for the post-treatment of urban wastewater. A pilot version of the overland flow system received urban wastewater from five up-flow anaerobic filters filled with bamboo (Bambusa tuldoides) rings. The anaerobic effluent was applied as feed over 18 months at rates varying from 7 to 28 L min(-1), to a vegetated slope length covered with Tifton 85 (Cynodon) sp. grass. Soil and plant samples were collected in triplicate from the top to the bottom of the slope. In addition, the soils were sampled at the depths 0-20 and 20-40 cm. The metal concentrations found in the overall system were compared to those obtained in a control area located at the beginning of the slope onto which nothing was applied. A month of monitoring the urban wastewater of Limeira City (S?o Paulo State, Brazil) showed a drastic change in metals concentration due to the irregular discharge of industrial waste. This irregular discharge introduces Cr, Cu, Ni, Pb and Zn into the system used to treat domestic wastewater. The mass balance indicates the accumulation of metals in the soil and the translocation to the plants; also that they could be evapotranspirated, percolated and discharged.     

Time dependent influx and efflux of phenol by immobilized microbial consortium

Phenol, like many other organic solvents, is toxic to micro-organisms even at low concentrations. However, some micro-organisms can withstand this toxicity to a certain concentration. To observe the uptake mechanism of phenol, bacteria were isolatedfrom a petroleum refinery effluent and identified. Study was carried out to understand the effect of varying sub-lethal concentrations of phenol, on all the isolated individual bacterial cultures. Out of the bacteria isolated, Serratia liquefaciens was found to tolerate phenol concentration up to 1500 mg l^-1. A microbial consortium of the isolated bacteriawas formulated and immobilized. Individual cultures were also immobilized and uptake of phenol by the immobilized micro-organisms was observed in a nutrient-rich and nutrient-stressed medium containing phenol as a sole source of carbon. A time-dependent uptake of phenol was exhibited by the micro-organismsin nutrient-stressed medium, after which a sudden increase in phenol concentration occurred in the extracellular medium, till it reached back to the initial concentration. This was attributedto an active efflux mechanism adopted by the micro-organisms to withstand the toxic shock.     

Sediment quality in the Douro river estuary based on trace metal contents, macrobenthic community and elutriate sediment toxicity test (ESTT)

The aim of this study was to evaluate the sediment quality in the mesotidal Douro River estuarine environment, in order to identify areas where sediment contamination could cause ecosystem degradation. Samples were obtained in five locations and sediment characterised for grain size, total organic matter, total-recoverable metals (Al, Fe, Cu, Pb, Cr, Ni, Cd, Zn and Mn), as well as acid volatile sulfide (AVS) and simultaneously extracted metals (SEM). In situ effects were evaluated by examining the macrobenthic community structure. An elutriate sediment toxicity test (ESTT) was used to estimate the amount of metals and nutrients that could be exchanged with the water column through resuspension, and its positive or negative effects on the growth of the micro-alga Emiliania huxleyi in a 10 day test. Anthropogenic metal contamination was identified at the north bank of the Douro estuary, with deleterious effects on the macrobenthic community, namely decrease in number of species and diversity. This contamination could possibly also be toxic for water column organisms, in case of resuspension, as shown by the ESTT. Sediments from the salt marsh at the south bank showed an impoverished macrobenthic community and elutriate toxicity, which appeared to be due to anaerobic conditions. This study clearly shows the usefulness of the ESST approach to assess the biological effect of resuspension of estuarine sediments.     

A 1 and 6 month follow-up of prenatal diagnosis patients who lost pregnancies

This paper reports results of an exploratory study of prenatal diagnosis patients who experienced voluntary terminations of pregnancy following the detection of an abnormality or spontaneous miscarriages. The 121 participants were part of the national collaborative Chorionic Villus Sampling and Amniocentesis Study. They completed semi-structured telephone interviews and mailed questionnaires at 1 month and 6 months after the pregnancy losses. Scores on the Profile of Mood States showed that mood levels improved significantly over time. However, there were some declines in loss-related support from partners and others. The persisting distress and difficulties of a minority highlight the variability in women's responses to pregnancy losses. Women who lost pregnancies later in gestation, showed the greatest mood disturbances at initial assessments, used professional mental health assistance after the loss, or reported less satisfactory loss-related support from significant others showed the greatest levels of mood disturbance at the six-month assessment. Follow-up contacts with patients who lose pregnancies should be used to inform women about the variation in possible grief reactions, to assess the extent of support the women are receiving from their partners and significant others, and to provide additional follow-up or referral of those experiencing the greatest distress.