The influence of association of plant growth-promoting rhizobacteria and zero-valent iron nanoparticles on removal of antimony from soil by Trifolium repens

Using association of plants, nanomaterials, and plant growth-promoting bacteria (PGPR) is a novel approach in remediation of heavy metal-contaminated soils. Co-application of nanoscale zerovalent iron (nZVI) and PGPR to promote phytoremediation of Sb-contaminated soil was investigated in this study. Seedlings of Trifolium repens were exposed to different regimes of nZVI (0, 150, 300, 500, and 1000 mg/kg) and the PGPR, separately and in combination, to investigate the effects on plant growth, Sb uptake, and accumulation and physiological response of the plant in contaminated soil. Co-application of nZVI and PGPR had positive effects on plant establishment and growth in contaminated soil. Greater accumulation of Sb in the shoots compared to the roots of T. repens was observed in all treatments. Using nZVI significantly increased accumulation capacity of T. repens for Sb with the greatest accumulation capacity of 3896.4 μg per pot gained in the “PGPR+500 mg/kg nZVI” treatment. Adverse impacts of using 1000 mg/kg nZVI were found on plant growth and phytoremediation performance. Significant beneficial effect of integrated use of nZVI and PGPR on plant photosynthesis was detected. Co-application of nZVI and PGPR could reduce the required amounts of nZVI for successful phytoremediation of metalloid polluted soils. Intelligent uses of plants in accompany with nanomaterials and PGPR have great application prospects in removal of antimony from soil.

     

Experimental investigation,intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix composite

Dry wire electrical discharge machining (WEDM) is an environmentally friendly modification of the oil WEDM process in which liquid dielectric is replaced by a gaseous medium. In the present work, parametric analysis has been fulfilled while dry WEDM of Al–SiC metal matrix composite. Experiments were designed and conducted based on L₂₇ Taguchi's orthogonal array to study the effect of pulse on time, pulse off time, gap voltage, discharge current, wire tension and wire feed on cutting velocity (CV) and surface roughness (SR). Firstly, a series of exploratory experiments has been conducted to identify appropriate gas and wire material based on the values of cutting velocity. After selection of best gas and best wire, they were used for later stage of experiments. Analysis of variances (ANOVA) has been performed to identify significant factors. In order to correlate relationship between process inputs and responses, an adaptive neuro-fuzzy inference system (ANFIS) has been employed to predict the process characteristics based on experimental observation. At the end, an artificial bee colony (ABC) algorithm has been associated with ANFIS models to maximize CV and minimize SR, simultaneously. Then the optimal solutions that obtained through ANFIS-ABC technique have been compared with numbers of confirmatory experiments. Results indicated that oxygen gas and brass wire guarantee superior cutting velocity. Also, according to ANOVA, pulse on time and discharge current were found to have significant effect on CV and SR. In modeling of CV and SR by ANFIS, it was resulted that the proposed method has superiority in prediction of them in the ranges of factors beyond the training condition. Also, association of ANFIS with ABC can find the optimal combination of process parameters accurately according to the confirmatory experiments.     

Tropical deforestation in a future international climate policy regime—lessons from the Brazilian Amazon

The possibility of adopting national targets for carbon dioxide (CO₂) emissions from tropical deforestation in a future international climate treaty has received increasing attention recently. This attention has been prompted by proposals to this end and more intensified talks on possible commitments for developing countries beyond the United Nations Framework Convention on Climate Change Kyoto Protocol. We analyze four main scientific and political challenges associated with national targets for emissions from tropical deforestation: (1) reducing the uncertainties in emission inventories, (2) preserving the environmental integrity of the treaty, (3) promoting political acceptance and participation in the regime, and (4) providing economic incentives for reduced deforestation. We draw the following conclusions. (1) Although there are large uncertainties in carbon flux from deforestation, these are in the same range as for other emissions included in the current Kyoto protocol (i.e., non-CO₂ GHGs), and they can be reduced. However, for forest degradation processes the uncertainties are larger. A large challenge lies in building competence and institutions for monitoring the full spectrum of land use changes in developing countries. (2 and 3) Setting targets for deforestation is difficult, and uncertainties in future emissions imply a risk of creating ‘tropical hot air’. However, there are proposals that may sufficiently deal with this, and these proposals may also have the advantage of making the targets more attractive, politically speaking. Moreover, we conclude that while a full carbon accounting system will likely be politically unacceptable for tropical countries, the current carbon accounting system should be broadened to include forest degradation in order to safeguard environmental integrity. (4) Doubts can be cast over the possible effect a climate regime alone will have on deforestation rates, though little thorough analysis of this issue has been made.

Environmental impacts of new Coronavirus outbreak in Iran with an emphasis on waste management sector

Journal of Material Cycles and Waste Management - The COVID-19 pandemic have brought several environmental problems worldwide, among which management of municipal solid wastes (MSW) is of great...     

Facile Fabrication of Silver Nanoparticles Grafted with Fe3O4-Chitosan for Efficient Removal of Amoxicillin from Aqueous Solution: Application of Central Composite Design

Journal of Polymers and the Environment - In this study, Fe3O4 nanoparticles and chitosan along with silver nanoparticles was synthesized to apply for the rapid and simple removal of amoxicillin...     

First nonavian dinosaur from Lebanon: a brachiosaurid sauropod from the Lower Cretaceous of the Jezzine District

Two sauropod teeth from an Early Cretaceous (Neocomian) fluviodeltaic sandstone near Jezzine (Southern Lebanon) are the first nonavian dinosaur remains to be reported from Lebanon. Their distinctive character places them within Brachiosauridae. The sauropod teeth from Lebanon are a significant addition to the very scanty dinosaur record from the Levant, which hitherto consisted mainly of very poorly preserved and not easily identifiable specimens. The Basal Cretaceous Sandstone of Lebanon, thus, appears to be a potentially important source of fossil vertebrate material.     

Mammalian hairs in Early Cretaceous amber

Two mammalian hairs have been found in association with an empty puparium in a ∼100-million-year-old amber (Early Cretaceous) from France. Although hair is known to be an ancestral, ubiquitous feature in the crown Mammalia, the structure of Mesozoic hair has never been described. In contrast to fur and hair of some Jurassic and Cretaceous mammals preserved as carbonized filaments, the exceptional preservation of the fossils described here allows for the study of the cuticular structure. Results show the oldest direct evidence of hair with a modern scale pattern. This discovery implies that the morphology of hair cuticula may have remained unchanged throughout most of mammalian evolution. The association of these hairs with a possible fly puparium provides paleoecological information and indicates peculiar taphonomic conditions.     

Examination of the operator and compensator tank role in urban wastewater treatment using activated sludge method

No doubt, operator is one of the main fundaments in wastewater treatment plants. By identifying the inadequacies, the operator could be considered as an important key in treatment plant. Several methods are used for wastewater treatment that requires spending a lot of cost. However, all investments of treatment facilities are useable when the expected efficiency of the treatment plant was obtained. Using experienced operator, this goal is more easily accessible. In this research, the wastewater of an urban community contaminated with moderated, diluted and highly concentrated pollution has been treated using surface and deep aeration treatment method. Sampling of these pilots was performed during winter 2008 to summer 2009. The results indicate that all analyzed parameters were eliminated using activated sludge and surface aeration methods. However, in activated sludge and deep aeration methods in combination with suitable function of operator, more pollutants could be eliminated. Hence, existence of operator in wastewater treatment plants is the basic principle to achieve considered efficiency. Wastewater treatment system is not intelligent itself and that is the operator who can organize even an inefficient system by its continuous presence. The converse of this fact is also real. Despite the various units and appropriate design of wastewater treatment plant, without an operator, the studied process cannot be expected highly efficient. In places frequently affected by the shock of organic and hydraulic loads, the compensator tank is important to offset the wastewater treatment process. Finally, in regard to microbial parameters, existence of disinfection unit is very useful.     

Ecological and economic impacts of different irrigation and fertilization practices: case study of a watershed in the southern Iran

Best management practices, such as conservation tillage, the optimum level of irrigation, fertilization, are frequently used to reduce non-point source pollution from agricultural land and improve water quality. In this study, we used the soil and water assessment tool to model the impacts of different irrigation (adjusted to crop need), cropping and fertilization practices on total nitrogen loss. The economic impacts of these practices on crop net farm income were also evaluated. For this purpose, the model was calibrated through comparing model outputs with observations to ensure reliable hydrologic, crop yield and nitrate leaching simulations. The results showed that by reducing water or fertilizer or combination of both, we can reduce nitrate leaching. For wheat and corn, the best scenario was S1n1 (combination between reduction by 10 % of water and nitrogen fertilizer application, simultaneously) and S2n3 (combination of 20 and 30 % reduction in water and fertilizer application), respectively. These scenarios are both ecologically and economically desirable. Also, decreasing nitrogen fertilization by 50 % for corn would decrease the nitrate pollution from 101.1 to 32.3 kg N ha^?1; therefore, this strategy is ecologically desirable but economically unsound. So, there are opportunities for environmental decision makers to encourage farmers to implement these strategies. Also, since the nitrogen leaching cannot decrease without a reduction in net farm income for crops such as corn; hence, the losses of farmers should be compensated.     

A novel pollution index based on the bioavailability of elements: a study on Anzali wetland bed sediments

In this research, we study on the distribution of several elements in bed sediments of Anzali wetland. Anzali, one of the most important international wetlands, is located on the southern coast of the Caspian Sea in Iran. This wetland receives discharges of domestic, agricultural, and industrial wastewater, which affect the distribution of elements. Our contribution in this study is threefold. First, we measured the total concentration of metals as well as their chemical partitioning and bioavailability in the sediments. Second, we calculated anthropogenic portions of metals in the sediment of this area. The results reveal anthropogenic portion of metals as Mo > Mn > Cd > As > Zn > Hg > Co > Sn > Cu > V > Ag > Ni > Pb > Fe > Cr > Al, respectively. We evaluated the intensity of pollution by using an enrichment factor, the geo-accumulation index and the pollution index. All these indices do not take into consideration the bioavailability of the elements. As our third and most important contribution, we introduced a new formula that takes into account the bioavailability of different elements. In comparison with aforementioned pollution indices, our newly introduced pollution index has a higher Pearson correlation with anthropogenic portion of metals. This high-correlation coefficient shows that our proposed pollution index is an effective indicator for determining the level of pollution, while other indices preserve their own merits.