Leaching of copper and zinc from the tailings sample obtained from a porcelain stone mine: feasibility,modeling, and optimization

Environmental Science and Pollution Research - This research was aimed to investigate the leaching behavior of zinc and copper from a porcelain stone tailings sample using RSM-CCD modeling. The...     

Archaeal Poly (3-hydroxybutyrate) Polymer Production from Glycerol: Optimization by Taguchi Methodology

In this study the possibility of poly (3-hydroxybutyrate) production from glycerol was investigated and optimized by Halorcula sp. IRU1, a novel archaea isolated from Urmia lake, Iran in batch experiments. Using Taguchi methodology, three important independent parameters (glycerol, yeast extract and KH₂PO₄) were evaluated for their individual and interactive effects on poly (3-hydroxybutyrate) production. It was shown that the glycerol concentration was the most significant factor affecting the yield of poly (3-hydroxybutyrate). The optimum factor levels were a glycerol concentration of 8% (v/v), yeast extract 0.8% (w/v) and KH₂PO₄ 0.002% (w/v). The predicted value obtained for poly (3-hydroxybutyrate) production under these conditions was about 81.87%. We can conclude that Haloarcula sp. IRU1 has a high potential for synthesis of poly (3-hydroxybutyrate) from glycerol.     

Simultaneous Cr (VI) reduction and diazinon oxidation with organometallic sludge formation under photolysis: kinetics,degradation pathways,and mechanism

Environmental Science and Pollution Research - In this study, simultaneous removal of an organic matter (diazinon, DIZ) and an inorganic substance (chromium, Cr) was used. Breaking down of organic...     

Recycling lead from a zinc plant residue (ZPR) using brine leaching and cementation with aluminum powder

Environmental Science and Pollution Research - This research investigated the treatment process of an Iranian zinc plant residue for recycling lead utilizing brine leaching and cementation with...     

Coagulation of highly turbid suspensions using magnesium hydroxide: effects of slow mixing conditions

Laboratory experiments were carried out to study the effects of slow mixing conditions on magnesium hydroxide floc size and strength and to determine the turbidity and total suspended solid (TSS) removal efficiencies during coagulation of highly turbid suspensions. A highly turbid kaolin clay suspension (1,213?±?36 nephelometric turbidity units (NTU)) was alkalized to pH 10.5 using a 5 M NaOH solution; liquid bittern (LB) equivalent to 536 mg/L of Mg²⁺ was added as a coagulant, and the suspension was then subjected to previously optimized fast mixing conditions of 100 rpm and 60 s. Slow mixing speed (20, 30, 40, and 50 rpm) and time (10, 20, and 30 min) were then varied, while the temperature was maintained at 20.7?±?1 °C. The standard practice for coagulation-flocculation jar test ASTM D2035-13 (2013) was followed in all experiments. Relative floc size was monitored using an optical measuring device, photometric dispersion analyzer (PDA 2000). Larger and more shear resistant flocs were obtained at 20 rpm for both 20- and 30-min slow mixing times; however, given the shorter duration for the former, the 20-min slow mixing time was considered to be more energy efficient. For slow mixing camp number (Gt) values in the range of 8,400–90,000, it was found that the mixing speed affected floc size and strength more than the time. Higher-turbidity removal efficiencies were achieved at 20 and 30 rpm, while TSS removal efficiency was higher for the 50-rpm slow mixing speed. Extended slow mixing time of 30 min yielded better turbidity and TSS removal efficiencies at the slower speeds.     

Use of waste gypsum to replace natural gypsum as set retarders in portland cement

The present study is focused on clarifying the influence of waste gypsum (WG) in replacing natural gypsum (NG) in the production of ordinary Portland cement (OPC). WG taken from slip casting moulds in a ceramic factory was formed from the hydration of plaster of paris. Clinker and 3–5 wt% of WG was ground in a laboratory ball mill to produce cement waste gypsum (CMWG). The same procedure was repeated with NG to substitute WG to prepare cement natural gypsum (CMNG). The properties of NG and WG were investigated via X-ray Diffraction (XRD), X-ray fluorescence (XRF) and differential scanning calorimetry (DSC)/thermogravimetric (TG) to evaluate the properties of CMNG and CMWG. The mechanical properties of cement were tested in terms of setting time, flexural and compressive strength. The XRD result of NG revealed the presence of dihydrate while WG contained dihydrate and hemihydrate. The content of dihydrate and hemihydrates were obtained via DSC/TG, and the results showed that WG and NG contained 12.45% and 1.61% of hemihydrate, respectively. Furthermore, CMWG was found to set faster than CMNG, an average of 15.29% and 13.67% faster for the initial and final setting times, respectively. This was due to the presence of hemihydrate in WG. However, the values obtained for flexural and compressive strength were relatively the same for CMNG and CMWG. Therefore, this result provides evidence that WG can be used as an alternative material to NG in the production of OPC.     

Sustainable consumption: the effects of knowledge,cultural values,environmental advertising,and demographics

As a result of human lifestyles and unsustainable consumption patterns, the environment continues to deteriorate and thus inhibit sustainable development. In order to curb this situation and promote a sustainable economy, one of the solution is to reduce conventional products consumption and shift to green products. Over the past 20 years, marketing managers keenly seek to understand the green market; however, inadequate information on how to promote consumers’ green behavioral intentions is slowing the growth of green markets and becomes a barrier for firms when developing segments and communicating strategies for effective promotion of green products in countries like Malaysia where the trend is fairly new. Therefore, this study attempts to examine the impact of environmental knowledge, cultural values, and environmental advertising and determine the moderating effect of income level, education level, and gender on consumers’ green purchase intentions. A survey was administered, and a total of 405 valid questionnaires were obtained. Structural equation modeling technique was used to evaluate the causal model by using SmartPLS 2.0 software. The finding results suggest that cultural values and environmental advertising are the main influences in building green purchase intentions, while environmental knowledge is not significantly related. The results also indicate that education level and gender have a significant positive moderation effect while income did not. This suggests that green purchase intentions’ motivational factors are greater among highly educated individuals, with females in particular. The discussions and implications of these findings are further elaborated.     

Government management and overexploitation of groundwater resources: absence of local community initiatives in Ardabil plain-Iran

Although mismanagement of groundwater resources has resulted in their destruction over centuries, climate change is speeding up this process more than ever. On the one hand, urgent action by government bodies is needed to address the challenge. On the other hand, a vast body of literature proves that bottom-up collective action, although requiring a longer time period, is a better solution to manage such resources. This research aims to address this dilemma. The groundwater resource in Ardabil plain in Iran, which has long been managed solely through government intervention, has been chosen as a case study to explore the opportunities and limitations of managing a critically endangered area from a common pool resource perspective. Our study suggests that managing Ardabil groundwater resources should be conducted on two scales. The bottom-up institutional agreements should take place at village scale while the government should stay in charge of the overall organization at plain scale.     

Land suitability assessment for wind power plant site selection using ANP-DEMATEL in a GIS environment: case study of Ardabil province,Iran

Wind energy is a renewable energy resource that has increased in usage in most countries. Site selection for the establishment of large wind turbines, called wind farms, like any other engineering project, requires basic information and careful planning. This study assessed the possibility of establishing wind farms in Ardabil province in northwestern Iran by using a combination of analytic network process (ANP) and decision making trial and evaluation laboratory (DEMATEL) methods in a geographical information system (GIS) environment. DEMATEL was used to determine the criteria relationships. The weights of the criteria were determined using ANP and the overlaying process was done on GIS. Using 13 information layers in three main criteria including environmental, technical and economical, the land suitability map was produced and reclassified into 5 equally scored divisions from least suitable to most suitable areas. The results showed that about 6.68 % of the area of Ardabil province is most suitable for establishment of wind turbines. Sensitivity analysis shows that significant portions of these most suitable zones coincide with suitable divisions of the input layers. The efficiency and accuracy of the hybrid model (ANP-DEMATEL) was evaluated and the results were compared to the ANP model. The sensitivity analysis, map classification, and factor weights for the two methods showed satisfactory results for the ANP-DEMATEL model in wind power plant site selection.