Performance of Cow Dung Reinforced Biodegradable Poly(Lactic Acid) Biocomposites for Structural Applications

In this work, performance of cow dung (CD) reinforced poly(lactic acid) (PLA) biocomposites was investigated for the potential use in load bearing application. CD of average 4 mm size was blended with PLA at different CD ratios (0–50 wt%) and their effects on the biocomposite properties were studied. The results showed an improvement in the flexural properties, while the tensile and impact strength dropped by 20 and 28% with the addition of 50% CD. The decline in the tensile and impact strength was due to micro-cracking and voids formation at higher CD content. Also, the incorporation of CD slightly decreased the thermal stability of the biocomposite. However, dynamic mechanical properties of the biocomposites generally improved. SEM analysis of tensile and impact fractured surfaces indicated that the CD had a reasonable adhesion with matrix. Moreover, the SEM micrographs of soil burial studies showed an accelerated degradation of higher CD wt% biocomposites.     

Modeling biodegradation and kinetics of glyphosate by artificial neural network

An artificial neural network (ANN) model was developed to simulate the biodegradation of herbicide glyphosate [2-(Phosphonomethylamino) acetic acid] in a solution with varying parameters pH, inoculum size and initial glyphosate concentration. The predictive ability of ANN model was also compared with Monod model. The result showed that ANN model was able to accurately predict the experimental results. A low ratio of self-inhibition and half saturation constants of Haldane equations (< 8) exhibited the inhibitory effect of glyphosate on bacteria growth. The value of K(i)/K(s) increased when the mixed inoculum size was increased from 10(4) to 10(6) bacteria/mL. It was found that the percentage of glyphosate degradation reached a maximum value of 99% at an optimum pH 6-7 while for pH values higher than 9 or lower than 4, no degradation was observed.     

Evaluation of membrane bioreactor for hypersaline oily wastewater treatment

Produced water is a significant waste stream generated in association with oil and gas production. It contains high concentrations of hydrocarbon constituents and different salts. In this study, a membrane sequencing batch reactor (MSBR) was used to treat synthetic and real produced water. The MSBR was evaluated in terms of biodegradation of hydrocarbons in the synthetic produced water with various organic loading rates (OLR) (0.281, 0.563, 1.124, 2.248, and 3.372 kg COD/(m³ day)), cycle time (12, 24, and 48 h), and membrane performance. The effects of salt concentrations at different total dissolved solids (TDS) (35,000, 50,000, 100,000, 150,000, 200,000, and 250,000 mg/L) on biological treatment of the pollutants in the synthetic and real wastewater were studied. At an OLR of 1.124 kg COD/(m³ day), an HRT of 48 h and TDS of 35,000 mg/L, removal efficiencies of 97.5%, 97.2%, and 98.9% of COD, total organic carbon (TOC), and oil and grease (O&G), respectively were achieved. For the real produced water, removal rates of 86.2%, 90.8%, and 90% were obtained for the same conditions. However, with increasing salt content, the COD-removal efficiencies of the synthetic and real produced water were reduced to 90.4% and 17.7%, respectively at the highest TDS.     

Hydrological connectivity and <Emphasis Type="Italic">Burkholderia pseudomallei</Emphasis> prevalence in wetland environments: investigating rice-farming community’s risk of exposure to melioidosis in North-East Thailand

In our analysis of 136 water samples from wetland environments (rice paddies, natural wetland sites, man-made water bodies) in rural areas of North-East Thailand, Burkholderia pseudomallei was most prevalent in rice paddies (15 of the 30 positive sites). The high prevalence in the water of rice fields is indicative of the inherent vulnerability of farmers in rural agricultural areas in this area of Thailand and likely other locations in the tropics. Nearly all B. pseudomallei-positive sites were found within the vicinity of a large wetland associated with the Chi River, in the month of July 2014. Positive samples were found in water ranging in pH from 5.9 to 8.7, salinity ranging from 0.04 to 1.58 ppt, nitrate ranging from 0 to 10.8 ppm, and iron ranging from 0.003 to 1.519 ppm. Of these variables, only iron content was statistically higher in B. pseudomallei-positive versus B. pseudomallei-negative sites, suggesting that increasing concentrations of iron may encourage the growth of this bacterium, which is responsible for melioidosis. Our results, when combined with data from other published studies, support the notion that B. pseudomallei can exist in a wide range of environmental conditions. Thus, we argue that health safety education is a more appropriate means of addressing farmer vulnerability than chemical or physical alterations to fields at large scales. Further, it may be important to investigate melioidosis through transdisciplinary approaches that consider the complex social and ecological contexts in which the disease occurs.     

Performance and mechanistic study on electrocoagulation process for municipal wastewater treatment based on horizontal bipolar electrodes

• EC modified with BPEs enhances pollutant removal and reduce energy consumption. • Increasing BPE number cannot increase flocculants yield exponentially. • Simulations help to predict the distribution of electrochemical reactions on BPEs. The design of electrodes is crucial to electrocoagulation process (EC), specifically, with respect to pollutant removal and energy consumption. During EC, the mechanisms for interaction between different electrode arrangement and electrode reactions remain unclear. This work presents an integrated EC process based on horizontal bipolar electrodes (BPEs). In the electrochemical cell, the graphite plates are used as driving cathode while either Fe or Al plates serves as driving anode and BPEs. The BPEs are placed horizontally between the driving electrodes. For municipal wastewater treatment, the pollutant removal efficiency and energy consumption in different configurations of two-dimension electrocoagulation (2D-EC) system with horizontal BPEs were investigated. The removal efficiency of turbidity, total phosphorus and total organic carbon increased significantly with the number of BPEs. Noted that the energy consumption for TP removal decreased by 75.2% with Fe driving anode and 81.5% with Al driving anode than those of 2D-EC, respectively. In addition, the physical field simulation suggested the distributions of potential and current in electrolyte and that of induced charge density on BPE surface. This work provides a visual theoretical guidance to predict the distribution of reactions on BPEs for enhanced pollutant removal and energy saving based on electrocoagulation process for municipal wastewater treatment.     

Biomass as the Renewable Energy Sources in Malaysia: An Overview

Past and current economic growths of Malaysia have been primarily energized by fossil fuels. Malaysia has very substantial potential for biomass energy utilization given its equatorial climate that is ideal for dense tropical forest growth and agricultural vegetation. There are five major sectors contributing wastes to biomass energy in Malaysia: forestry (wood products), rubber cultivation, cocoa cultivation, sugar cane cultivation and oil palm cultivation. Biomass in Malaysia contributes about 14% of the approximately 340 million barrel of oil equivalent (boe) of energy used every year. This paper provides an overview on the types of biomass being used, the research works on biomass conversion into energy and the present biomass energy projects in Malaysia.     

An integrated approach for the benchmarking of production facilities’ environmental performance: data envelopment analysis and life cycle assessment

Environmental impacts have become an important consideration in the manufacturing industry due to increasing public pressure for environment protection and the requirements of recently launched legislations. Data envelopment analysis (DEA) is a widely adopted methodological approach for the benchmarking of the relative efficiency of different production units. Changes in production efficiency may affect environmental impacts. DEA can be used for identifying the most efficient production facility and hence, the environmental impacts generated from the different production lines can then be benchmarked. Life cycle assessment (LCA) is carried out to quantify the full environmental impacts of a product from ‘cradle to grave’. The integration of LCA with DEA, efficiency and environmental impact of different production processes for a certain family of products can be evaluated and benchmarked. The proposed two-stage approach can help to reduce the aggregate environmental impacts of the manufacturing phase and is used to benchmark the environmental performance of several production lines in a manufacturing company.     

Biocompatible Polyurethane Scaffolds Prepared from Glycerol Monostearate-Derived Polyester Polyol

Biodegradable polyester polyol was synthesized from oleochemical glycerol monostearate (GMS) and glutaric acid under a non-catalyzed and solvent-free polycondensation method. The chemical structure of GMS-derived polyester polyol (GPP) was elucidated by FTIR, ¹H and ¹³C NMR, and molecular weight of GPP was characterized by GPC. The synthesized GPP with acid value of 3.03 mg KOH/g sample, hydroxyl value of 115.72 mg KOH/g sample and M_n of 1345 g/mol was incorporated with polyethylene glycol (PEG) and polycaprolactone diol (PCL diol) to produce a water-blown porous polyurethane system via one-shot foaming method. The polyurethanes were optimized by evaluating glycerol as a crosslinker, silicone surfactant and water blowing agent on tensile properties of polyurethanes. All polyurethanes underwent structural change, and crystalline hard segments of polyurethanes were shifted to higher temperature suggested that hard segments undergone re-ordering process during enzymatic treatment. In terms of biocompatibility, polyurethane scaffold produced by reacting 100% w/w of GPP with isophorone diisocyanate and additives showed the highest cells viability of 3T3 mouse fibroblast (94%, day 1), and MG63 human osteosarcoma (107%, day 1) and better cell adhesion as compared to reference polyurethane produced by only PEG and PCL diol (3T3 cell viability: 8%; MG63 cell viability: 2%). The current work demonstrated GPP synthesized from renewable and environmental friendly resources produced polyurethanes that allows improvement in physico-chemical, mechanical and biocompatibility properties. By blending with increasing content of GPP, the water-blown porous polyurethane scaffold has shown great potential as biomaterial for soft and hard tissue engineering.     

A hybrid approach for environmental impact evaluation of design options

The strengthened environmental regulatory requirements and general awareness of the need for environmental conservation worldwide, design for environment has become a key design criterion in new product development processes. Due to their resources-consuming attribute and the prerequisite expert knowledge in environmental sciences for the impacts interpretations, the existing forms of product-oriented environmental impact assessment methods are impractical to be adopted by product designers in small-and-medium enterprises. Life Cycle Assessment (LCA) is a generally accepted quantitative approach to assess a product’s environmental impact. However, a full LCA study often requires a considerable amount of data and therefore, it is regarded as not a handy tool for product design evaluations particularly at the initial design stage. This leads to our intention to develop an immediately applicable approach for decision-makers to evaluate the design options. The proposed approach integrates Analytic Hierarchy Process and Fuzzy Theory, with Evidential Reasoning (ER) to support the environmental impact evaluations of design options. A case study is carried out to demonstrate its applicability to prioritize the environmental impact of various design options. A symmetrical triangular distribution is introduced for calculating the expected utility and for testing the sensitivity of results.     

Catalytic CO oxidation over manganese-containing perovskites

Mixed metal oxides are discussed as possible substitutes for noble metals in automobile catalytic converters. The catalytic activity for CO oxidation of LaMnO₃ and La_0.5Sr_0.5MnO₃ catalysts was examined.The ability of these catalysts to provide lattice oxygen and to sustain the oxidation reaction, even in the absence of molecular oxygen, has been confirmed. Measurements were performed of the reversible oxygen uptake on the two catalysts.