佳木斯台形变观测对东北地区几次浅震“场兆”异常的探讨

大地震在主破裂前往往行成地壳变形,高应力作用下进入峰值后的变形阶段,反映到地倾斜观测日均值曲线上,表现为固体潮形变趋势异常,这些异常能否指示远距离的地震,近年来不少研究者发现,远场前兆往往出现在对应力、应变变化反应灵敏的特殊构造部位。佳木斯台可能处于这种特殊的构造部位,对东北地区浅源地震短期前兆异常“场兆”的趋势性变化具有一定的意义。     

Innovative aspects of environmental chemistry and technology regarding air,water, and soil pollution

Environmental Science and Pollution Research -     

Sorption of As(V) ions by akaganéite-type nanocrystals

A priority pollution problem, the removal of arsenate oxyanions from dilute aqueous solutions by sorption onto synthetic akaganéite (beta-FeO(OH)) was the aim of the present study. This is an innovative inorganic adsorbent material prepared in the laboratory, following a new method of preparation. The effect of akaganéite and arsenate concentration, the contact time, temperature, solution pH value, and ionic strength variation on the treatment process was mainly investigated during this study. Typical adsorption isotherms were determined, which were found to fit sufficiently the typical Langmuir equation. The mechanism of sorption was examined by electrokinetic, X-ray diffraction, Fourier transmission infrared and scanning electron microscopy measurements. Promising results were obtained, due to the favourite characteristics of the adsorbent applied.     

On the use of metal-organic frameworks for the extraction of organic compounds from environmental samples

Environmental Science and Pollution Research - The determination of trace metals and organic contaminants in environmental samples, such as water, air, soil, and sediment, is until today a...     

Chromium(VI) sorptive removal from aqueous solutions by nanocrystalline akaganèite

In this study, akaganeite (beta-FeO(OH)) an ironoxyhydroxide material, was used as a low-cost potential adsorbent for the removal of hexavalent chromium from aqueous solutions. The influence of agitation speed, solution pH, initial chromium concentration, sorbent concentration and temperature were evaluated at batch kinetic runs. It was shown that the solid diffusion model, in comparison to simple reaction kinetic models, described better the sorption kinetics. Freundlich and Frumkin isotherm best fitted the equilibrium results. Akaganeite presented a sorption capacity approximately 80 mg Cr(VI) g(-1), under the conditions studied. Flotation was used as a downstream process for the effective removal of the loaded material.     

Adsorption of DBT and 4,6-DMDBTon nanoporous activated carbons: the role of surface chemistry and the solvent

Environmental Science and Pollution Research - Adsorption of dibenzothiophene (DBT) and 4,6-dimethyldibenzothiophene (4,6-DMDBT) from solutions in hexane and hexadecane respectively as well as in...     

Metals removal from aqueous solution by iron-based bonding agents

GOAL AND SCOPE AND BACKGROUND: The application of a promising method, termed sorptive flotation, for the removal of chromium(VI) and zinc ions was the aim of the present paper. A special case of sorptive flotation is adsorbing colloid flotation. Suitable sorbent preparation techniques have been developed in the laboratory. METHODS: Sorptive flotation, consisting of the sorption and flotation processes combined in series, has proved to give fast and satisfactory treatment of the industrial streams and effluents bearing dilute aqueous solutions of zinc and chromium(VI). RESULTS AND DISCUSSION: Goethite has proved to be effective for the removal of chromium(VI) and zinc ions. Also, adsorbing colloid flotation with ferric hydroxide (as the co-precipitant) could be an alternative method to the above-mentioned separation of metal ions. In both cases, chromium(VI) (pH=4) and zinc (pH=7) removal was about 100%. CONCLUSION: The reasons for selecting the iron-based bonding materials, like goethite and/or in-situ produced ferric hydroxide, are that they are cheap, easily synthesized, suitable both for cation and anion sorption, and, furthermore, that they present low risks for adding a further pollutant to the system. Promising results were obtained. RECOMMENDATION AND OUTLOOK: The application of goethite and in-situ produced ferric hydroxide has demonstrated their effectiveness in the removal of heavy metal ions, such as chromium anions and zinc cations. A proposed continuation of current work is the utilization of similar iron oxides, for instance synthesized akaganeite. The comparison between the results reported in this paper with the results reported in the literature, also deserves attention.