Photoactivation and photoregeneration of TiO2/PAC mixture applied in suspension in water treatments: approach to a real application

Environmental Science and Pollution Research - The process TiO2/PAC/UV-vis has been under study and compared with the isolated treatments of adsorption and photocatalysis determining possible...     

Acid Rain in Downtown São Paulo City, Brazil

During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown São Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, $ \rm NH^{ + }_{4} During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown S?o Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, , K⁺, Ca²⁺, Mg²⁺, Cl⁻, , ) and carboxylic acids (acetic, formic and oxalic) using ion chromatography. The volume weighted mean, VWM, of the anions , and Cl⁻ was, respectively, 20.3, 12.1 and 10.7 μmol l⁻¹. Rainwater in S?o Paulo was acidic, with 55% of the samples exhibiting a pH below 5.6. The VWM of the free H⁺ was 6.27 μmol l⁻¹), corresponding to a pH of 5.20. Ammonia (NH₃), determined as (VWM = 32.8 μmol l⁻¹), was the main acidity neutralizing agent. Considering that the H⁺ ion is the only counter ion produced from the non-sea-salt fraction of the dissociated anions, the contribution of each anion to the free acidity potential has the following profile: (31.1%), (26.0%), CH₃COO⁻ (22.0%), Cl⁻ (13.7%), HCOO⁻ (5.4%) and (1.8%). The precipitation chemistry showed seasonal differences, with higher concentrations of ammonium and calcium during autumn and winter (dry period). The marine contribution was not significant, while the direct vehicular emission showed to be relevant in the ionic composition of precipitation.     

Kinetic analysis of constructed systems for the recovery of contaminated areas by acid mine drainage

INTRODUCTION: Flowing of the acid mine drainage may contaminate the adjacent water bodies causing substantial changes in the aquatic ecosystem. This aspect is the most relevant problem in the southern of Santa Catarina once the contaminated areas are inserted in the watershed of the Araranguá, Urussanga, and Tubar?o rivers, increasing the need for recovery studies. These areas are between Criciúma, I?ara, Urussanga, Siderópolis, Lauro Müller, Orleans, and Alfredo Wagner towns where a conservation unit exist called the Environmental Preservation Area of Baleia Franca. Aiming to compare the kinetics of the ash derived from burning coal and to neutralize acid mine drainage, different neutralizer, limestone, fly, and bottom ash, was mounted on a pilot scale experiment. DISCUSSION: The transport parameters showed the same order of infiltration and dispersion: fly ash < bottom ash < limestone. The order of measured alkalinity was: limestone < fly ash < bottom ash, with pH values of 9.34, 12.07, and 12.25, respectively. The limestone kinetics of acidic drainage neutralization was first order with reaction rate constant k?=?0.0963 min(-1), bottom ash was 3/4 with k?=?0.0723 mol(1/4) L(-1/4) min(-1), and the fly ash had higher order kinetics, 4/3, with reaction rate constant k?=?27.122 L(1/3) mol(-1/3) min(-1). However, by mathematical modeling, it was found that due to a combination of transport and kinetics, only limestone treatment reached a pH above 6 within 5 years, corresponding to the ideal as planned.     

A Comparison of Bayesian Methods for Uncertainty Analysis in Hydraulic and Hydrodynamic Modeling

We evaluate and compare the performance of Bayesian Monte Carlo (BMC), Markov chain Monte Carlo (MCMC), and the Generalized Likelihood Uncertainty Estimation (GLUE) for uncertainty analysis in hydraulic and hydrodynamic modeling (HHM) studies. The methods are evaluated in a synthetic 1D wave routing exercise based on the diffusion wave model, and in a multidimensional hydrodynamic study based on the Environmental Fluid Dynamics Code to simulate estuarine circulation processes in Weeks Bay, Alabama. Results show that BMC and MCMC provide similar estimates of uncertainty. The posterior parameter densities computed by both methods are highly consistent, as well as the calibrated parameter estimates and uncertainty bounds. Although some studies suggest that MCMC is more efficient than BMC, our results did not show a clear difference between the performance of the two methods. This seems to be due to the low number of model parameters typically involved in HHM studies, and the use of the same likelihood function. In fact, for these studies, the implementation of BMC results simpler and provides similar results to MCMC. The results of GLUE are, on the other hand, less consistent to the results of BMC and MCMC in both applications. The posterior probability densities tend to be flat and similar to the uniform priors, which can result in calibrated parameter estimates centered in the parametric space.     

Performance comparison of commercial TiO2: separation and reuse for bacterial photo-inactivation and emerging pollutants photo-degradation

This research aims to compare the disinfection and degradation effectiveness in water of a commercial suspension of nano-TiO₂ (TiO₂Levenger) with the standard TiO₂Degussa P25. Photo-inactivation and photo-degradation experiments were conducted with UVA-vis light. Concerning the disinfection, the effects of TiO₂ dose (0–2 g/l), water matrix, bacterium type (Gram-positive or Gram-negative), and bacterial regrowth after the photo-treatments were studied for each catalyst. The experimental results show that Enterococcus sp. (Gram-positive) was more resistant to the photo-treatments than Escherichia coli (Gram-negative) for both catalyst; however, postirradiation trends showed similar behavior for both bacteria, favoring regrowth for short-treated cells and decay for longer-treated ones. Caffeine was selected as a model substance of pharmaceuticals and personal care products. In terms of caffeine removal, the effects of TiO₂ dose (0–2 g/l) and water matrix were analyzed. Besides, the comparison between mechanical coagulation-flocculation-decantation and simple decantation of TiO₂ was carried out. The results show that simple decantation allowed the recovery of 97.5% of TiO₂ Degussa P25 and TiO₂ Levenger within 1 day of simple decantation, while applying the proposed mechanical coagulation-flocculation decantation 99.7% of recovery of both catalysts was achieved in 2 hours. Finally, the subsequent reuse of both catalysts was proved with little loss of efficiency in terms of photo-disinfection during the four cycles. Nevertheless, the standard TiO₂ Degussa P25 photo-degradation efficiency of caffeine decreases considerably as compared to commercial suspension of TiO₂ Levenger concerning the reutilization.

     

In vitro radical scavenging activity of two Columbian Magnoliaceae

The recent interest in the conservation of the tropical forest is due, at least in part, to the potential economic and health benefits that can be exploited from several plants. This report shows the in vitro antioxidant activity of some fractions isolated from leaves of two Columbian Magnoliaceae, Talauma hernandezii G. Lozano-C and Dugandiodendron yarumalense Lozano. The activity was determined using the radical monocation 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS·+) and the stable free radical 2-2-diphenyl-1-picrylhydrazyl (DPPH·), as part of general biological screening of these plants. The antioxidant capacity obtained from fractions was similar to those of α-tocopherol, tert-butylated hydroxyanisole (BHA), and ascorbic acid. The most active scavenger extract was the fraction 7 (TAA = 48.6 mmol Trolox/kg extract and IC₅₀ ≤ 0.01 kg extract/mmol DPPH); and the least active was the fraction 1 (TAA = 11.23 mmol Trolox/kg extract and IC₅₀ = 0.21 kg extract/mmol DPPH) all of them isolated from D. yarumalense. These results suggest that these plants can be attractive as source of antioxidant compounds with the ability to reduce radicals like ATBS and DPPH.     

Recent Industrial Applications of Lignin: A Sustainable Alternative to Nonrenewable Materials

Lignin represents a vastly under-utilized natural polymer co-generated during papermaking and biomass fractionation. Different types of lignin exist, and these differ with regard to isolation protocol and plant resource (i.e., wood type or agricultural harvesting residue). The incorporation of lignin into polymeric systems has been demonstrated, and this depends on solubility and reactivity characteristics. Several industrial utilization examples are presented for sulfur-free, water-insoluble lignins. These include materials for automotive brakes, wood panel products, biodispersants, polyurethane foams, and epoxy resins for printed circuit boards.     

Reuse of wood ash from biomass combustion in non-structural concrete: mechanical properties,durability, and eco-efficiency

Journal of Material Cycles and Waste Management - Wood biomass fly ash can contribute to a more sustainable urban infrastructure, but requires efficient recycling strategies. This paper...     

Lateral flow assay applied to pesticides detection: recent trends and progress

Environmental Science and Pollution Research - Devices based on lateral flow assay (LFA) have been gaining more and more space in the detection market mainly due to their simplicity, speed, and low...