Remobilization of polycyclic aromatic hydrocarbons during the resuspension of Yangtze River sediments using a particle entrainment simulator

Remobilization of 16 polycyclic aromatic hydrocarbons (PAHs) during sediment resuspension was investigated using a particle entrainment simulator at shear stress from 0.2 to 0.5Nm(-2), typical of the energy levels present in many tidally driven aquatic environments. The results suggested that desorption from the entrained particles was the primary source of dissolved PAHs. summation operatorPAHs concentrations in particles on volume normalization increased about four times. However, on mass weight basis, summation operatorPAHs concentrations decreased from 6039.74+/-138.28microgkg(-1) to 1665.39+/-112.26microgkg(-1). The same trend was observed for individual PAHs. Dissolved concentrations of PAHs demonstrated significant differences depending on molecular weight and applied shear. The distribution of PAHs between particle and water phase suggested that for three-ring PAHs, the amounts of PAHs in particles were higher than the predicted values during our experiments. This might be due to presence of another active sorbent.     

Reviews of emission of biogenic volatile organic compounds (BVOCs) in Asia

Biogenic volatile organic compounds (BVOCs) in the atmosphere play important roles in the formation of ground-level ozone and secondary organic aerosol (SOA) in global scale and also in regional scale under some condition due to their large amount and relatively higher reactivity. In places with high plant cover in the tropics and in China where air pollution is serious, the effect of BVOCs on ozone and secondary organic aerosols is strong. The present research aims to provide a comprehensive review about the emission rate, emission inventory, research methods, the influencing factors of BVOCs emissions, as well as their impacts on atmospheric environment quality and human health in recent years in Asia based on the summary and analysis of literatures. It is suggested to use field direct measurement method to obtain the emission rate and model method to calculate the emission amount. Several recommendations are given for future investigation and policy development on BVOCs emission.     

巴彦淖尔盟草场资源开发利用中存在的生态环境问题及其对策

巴彦淖尔盟地区草场退化问题已十分严峻 ,本文分析了巴彦淖尔盟草场资源开发利用中存在的生态环境问题及其成因 ,并提出了解决问题的对策     

主成份分析法在大气环境质量综合评价中的应用

介绍了主成份分析法评价大气环境质量的基本原理，并对某市的大气环境质量进行了综合评价。最后，与其它方法的评价结果进行了对比分析，进一步证实了主成份分析法的科学性、合理性。     

用若干固体废弃物改良土壤的可行性研究

合理利用粉煤灰、水库淤积物和污泥三种废弃物对保护环境有重要意义。选择干旱半干旱地区 ,联合施用上述三种废物进行土壤改良 ,兼有建设生态环境的作用。盆栽试验结果表明 :粉煤灰、水库淤积物、污泥按适当比例配合施用 ,对改良贫瘠土壤、促进植物生长有明显效果。     

利用PCR-DGGE技术分析生物陶粒硝化反应器中微生物群落动态

为了揭示生物陶粒硝化反应器中活性污泥的微生物种群多样性,从运行不同时期的反应器中提取活性污泥,利用PCR-DGGE技术初步分析了生物陶粒反应器细菌的种群演替情况.结果表明,随着进水COD值的逐阶段降低,氨氮去除率逐步提高到64.38%.群落结构和优势种群的数量具有时序动态性,微生物多样性与废水的处理效果出现协同变化的特征.测序结果表明,生物陶粒反应器中运行第21天的优势种群除了自养细菌,还有异养细菌存在.其中自养细菌为Nitrosospira.sp和Nitrobacter.sp,异养细菌为Bacillus.sp、Pseudomonas.sp和Pseudochrobactrum.sp.     

电催化氧化处理除草剂异噁草酮废水的效能

为有效处理含异噁草酮除草剂废水，以Sb掺杂Ti／SnO2电极为阳极，不锈钢板为阴极，采用电催化氧化技术对异噁草酮废水进行降解，研究了不同影响因素对异噁草酮去除率的影响，并分析了异噁草酮的降解效果。结果表明，当异噁草酮初始浓度为100mg／L、电流密度为20mA／cm2、电解质投加量为0．10mol／L，反应120min后，异噁草酮去除率达到94％，此时TOC去除率为57．9％，能耗为25kWh／m2，且废水的可生化性能显著提高。     

臭氧前体物排放清单相关模型及应用

欧美等国家对于O_3污染的研究开展较早,已建立较成熟的O_3污染生成、扩散及空气质量等模型。文章主要介绍评述了美国环保局推荐使用的计算O_3前体物的相关模型(MOVES、NONROAD、SMOKE、EMFAC和EDMS),从基本原理和功能、污染源类型、研究尺度、所需参数等方面对比分析各模型的特点和适用范围,并综述其国内外研究应用情况;讨论了中国在这些模型的使用方面应该注意的问题,如加强开展模型计算结果验证和基础实验获得本土化的模型参数,以及中国开发的相关模型的优势和适用性等。     

Fe(Ⅱ)EDTA络合吸收-铁粉还原再生脱除NO性能

利用Fe(Ⅱ)EDTA络合吸收-铁粉间歇还原再生脱除NO并回收氨资源的方法,实验研究了铁粉还原再生Fe(Ⅱ)(NO)EDTA的过程及其影响因素。结果表明,以0.015 mol/L的Fe(Ⅱ)EDTA做吸收剂,在起始p H 5.5、温度323K条件下吸收400×10-6~500×10-6的NO,脱除率95%以上;铁粉还原再生Fe(Ⅱ)(NO)EDTA过程可用缩芯模型阐释;铁粉添加量与搅拌强度直接决定了铁粉质点数量,是影响反应的重要因素;实验中Fe(Ⅱ)(NO)EDTA络合液150 m L,氧气含量为5%时,搅拌速度900 r/min、粒径为0.12 mm的铁粉浓度5.3 g/L、温度353 K、p H=6为最适宜再生条件。     

考虑屈曲行为的钢筋力学性能数值仿真分析

为评估考虑结构中纵筋受压屈曲形态的力学性能,采用ABAQUS有限元软件对长径比(L/D)不同的纵向钢筋在轴向压缩和循环荷载下强度和刚度的变化情况进行数值仿真,同时考虑加载历史和加载方式对钢筋力学性能的影响。结果表明,屈曲对纵向钢筋力学性能影响比较显著,纵向钢筋压缩性能取决于L/D,与钢筋屈服强度无关;钢筋在循环荷载作用下其力学性能受到加载历史、塑性变形、累积损伤以及L/D的影响,拉伸超过屈服应变后将导致钢筋压缩强度的损失,塑性变形和循环加载共同导致了钢筋累积损伤,钢筋屈曲行为造成了受压时钢筋强度和刚度的退化,并且随着L/D的增加钢筋强度和刚度退化越显著。