Polychlorinated dibenzo-p-dioxins, dibenzofurans and polychlorinated biphenyls levels in human breast milk from different regions of Turkey

Human breast milk offers the optimal nutrition for all infants and have been widely used in biomonitoring programs to assess human exposure to lipophylic environmental contaminants such as polychlorinated dibenzo-p-dioxins (PCDD), polychlorinated dibenzofurans (PCDF) and polychlorinated biphenyls (PCB). There are no previous reports from Turkey on chemically determined levels of PCDDs, PCDFs, and PCBs in human breast milk expressed as World Health Organization (WHO) toxic equivalents (TEQ). To get an overview of the levels of these contaminants in Turkish human milk, samples from 51 Turkish women living in the Ankara, İstanbul, Antalya, Kahramanmaraş, and Afyon provinces were analyzed by high resolution gas chromatography/high resolution mass spectrometry (HRGC/HRMS) throughout 2007. The mean concentrations of WHO_PCDD/F-TEQ and WHO_PCB-TEQ of all samples from the five regions were 7.5 and 3.1 pg g⁻¹ on a lipid basis, respectively. PCDD/F concentrations ranged between 0.78 and 29.3 pg WHO-TEQ g⁻¹ fat (1.7 and 36.2 pg WHO-TEQ g⁻¹ fat, respectively, including PCB). Of the five studied locations, the lowest levels of ∑TEQs (PCDD/F + PCB) were found in the Afyon (6.8 pg WHO-TEQ g⁻¹ fat) and the highest in the Antalya (15.6 pg WHO-TEQ g⁻¹ fat) province. The results have been discussed in terms of regions and PCDD/F and PCBs for which analyses had been made. The mean levels of PCDD/Fs and PCBs in Turkish human milk are comparable to that found in other countries.     

Spatial distribution and vertical profile of polybrominated diphenyl ethers and hexabromocyclododecanes in sediment core from Tokyo Bay, Japan

Brominated flame retardants (BFRs), hexabromocyclododecanes (HBCDs) and polybrominated diethyl ethers (PBDEs) were detected in three sediment cores and six surface sediments of Tokyo Bay, Japan. HBCDs were detected for the first time in this region with concentrations ranging from 0.056 to 2.3 ng/g dry wt, implying their widespread contamination, even though their concentrations were lower than summation operatorPBDEs (di- to nona-BDEs) and BDE-209. Levels of these compounds were higher near to the highly populated industrial area of the bay implicating industrial and human activities as sources of these compounds. Summation operatorPBDEs increased in the sediment layer up to the mid-1990s and decreased afterwards, whereas BDE-209 showed an increasing trend until now, following the usage of different commercial BDE mixtures. HBCDs first appeared in the mid-1970s and increased until today. The annual surficial flux of HBCDs (0.62-2.4 ng/cm2/yr) is equal to summation operatorPBDEs (0.95-2.6 ng/cm2/yr) but lower than that of BDE-209 (17-58 ng/cm2/yr).     

Facile Preparation of Chitin/Cellulose Composite Films Using Ionic Liquids

In this study, we performed the facile preparation of chitin/cellulose composite films using two ionic liquids, 1-allyl-3-methylimidazolium bromide (AMIMBr) and 1-butyl-3-methylimidazolium chloride (BMIMCl); the former dissolves chitin and the latter dissolves cellulose. First, solutions of chitin in AMIMBr and cellulose in BMIMCl were individually prepared by heating each mixture at 100 °C for 24 h. Then, the homogeneous mixture of the two solutions was thinly casted on a glass plate, followed by standing at room temperature for 2 h. After the material was subjected to successive Soxhlet extractions with ethanol for 12 h and with water for 12 h, the residue was dried at room temperature to give a composite film. The crystalline structures of the polysaccharides were evaluated by the X-ray diffraction measurement. Furthermore, the thermal stability and mechanical property of the resulting composite film were estimated by the thermal gravimetric analysis measurement and tensile testing, respectively.     

Evaluation of PCDD/F pollution in surface sediments of Izmit Bay

This study evaluates PCDD/F pollution in the surface sediments of Izmit Bay (Turkey) and assesses the possible sources of PCDD/F inputs to the bay. The results showed that concentrations of toxic PCDD/F congeners in the sediments varied between 0.45 and 255 ng WHO₂₀₀₅-TEQ/kg dry weight. Pollution mapping shows that PCDD/F levels in the central section of Izmit Bay are much higher than those in the eastern and the western sections. Sediments collected from the northern part of the central section showed very high PCDD/F concentrations. The samples reveal three different congener profiles dominated by OCDF, 1,2,3,4,6,7,8-HpCDF, and OCDD respectively. The dominance of OCDF in the sediment samples taken from the central section was attributed to the former production of vinyl chloride monomer in the area, while that of 1,2,3,4,6,7,8-HpCDF was attributed to the (previously unknown) use of a chlorophenol-based fungicide in the region. The OCDD dominated group was explained by the use of pentachlorophenol. The results indicate that historic industrial discharges are the main contributor to the PCDD/F pollution in the sediments.     

特种作业人员存在的问题及解决办法初探

例举了武钢金山店铁矿特种作业人员中存在的问题,提出了相应的解决办法。     

Sources of polycyclic hydrocarbons and pesticides in soluble fraction of deposition samples in Kocaeli,Turkey

A wet–dry deposition sampler was located at The Scientific and Technological Research Council of Turkey-National Metrology Institute (TUBITAK-UME) station, and a bulk deposition sampler was placed at the Kad?ll? village to determine the atmospheric deposition flux of polycyclic aromatic hydrocarbons (PAHs) and pesticides (organochlorine and organophosphorus) in soluble fraction of samples in Kocaeli, Turkey. The 28 samples for each wet, dry, and total deposition were collected weekly from March 2006 to March 2007. Gas chromatography-tandem mass spectrometry was used to analyze the samples which were prepared by using solid-phase extraction (SPE) method. The sum of volume weighted mean of deposition fluxes was obtained as 7.43 μg m^?2 day^?1 for wet deposition, 0.28 μg m^?2 day^?1 for dry deposition and 0.54 μg m^?2 day^?1 for bulk deposition samples for PAHs and 9.88 μg m^?2 day^?1 for wet deposition, 4.49 μg m^?2 day^?1 for dry deposition, and 3.29 μg m^?2 day^?1 for bulk deposition samples for pesticides. While benzo(a)anthracene had the highest fluxes among PAH compounds for all types of depositions, guthion and phosphamidon had the highest deposition flux compared with the other pesticides. Benzo(ghi)perylene, dibenz(a,h)anthracene, indeno(1,2,3-c,d)pyrene, benzo(a)pyrene, and acenaphthene were not detected in any of the samples. Beta-HCH, gamma-HCH, and endrin aldehyde were the only compounds among 18 organochlorine pesticides to be detected in all deposition samples. The main sources of pesticides were the high number of greenhouses around the sampling stations. However, all of the organophosphorus pesticides were detected in all deposition samples. The pollution sources were identified as coal and natural gas combustion, petrogenic sources, and traffic for TUBITAK-UME station whereas coal and natural gas combustion and traffic were the main sources for Kad?ll? station by considering the results of factor analysis, ratios, and wind sector analysis.     

Body color change and serum steroid hormone levels throughout the process of sex change in the adult wrasse, <Emphasis Type="Italic">Pseudolabrus sieboldi</Emphasis>

Gonadal sex steroid hormones are the principal factors that directly control the gonadal and morphological alterations during sex change in hermaphrodite fish; however, the physiological mechanism of action by which these hormones govern body coloration is poorly understood. The protogynous wrasse Pseudolabrus sieboldi is a good model for understanding the physiological mechanisms of gonadal and body color change during sex change in hermaphrodite fish. To obtain information on the relationship between sex steroids and body color change during the process of gonadal sex change, we analyzed body color, gonadal histology, and serum levels of sex steroids. Body color was analyzed using a quantitative analytical method based on the hue value. Compared to other body parts of the fish, the anal fin changed color the most, becoming increasingly redder in association with gonadal changes that converted ovaries to testes. Levels of serum 11-ketotestosterone (11KT) increased as the gonadal sex change proceeded, whereas no significant change was observed in estradiol-17β (E2) levels. Moreover, we found a significant correlation between the hue value of the anal fin and serum 11KT levels, but not E2 levels. These results suggest that androgen, but not estrogen, plays a principle role in the changes in both gonadal morphology and body color in the transformation from female to male in this species. To our knowledge, this is the first quantitative demonstration of the relationship between body color and serum steroid levels during sex change in fish.     

1,3-Propanediol Production Potential by a Locally Isolated Strain of Klebsiella Pneumoniae in Comparison to Clostridium Beijerinckii NRRL B593 from Waste Glycerol

The fermentative production of 1,3-propanediol (1,3-PDO) by Klebsiella pneumoniae under different initial substrate concentrations (between 5 and 110 g/L) was investigated. It was found that glycerol was almost 100% utilized and 1,3-PDO production increased up to 20 g/L of influent substrate concentration, but there was a significant decrease in both glycerol consumption and 1,3-PDO production at substrate concentrations exceeding 20 g/L. Furthermore, pH control was essential, and a lack of pH control negatively effects of 1,3-PDO production. In the second part of the study, two microorganisms, namely Clostridium beijerinckii NRRL B593 and K. pneumoniae were comparatively studied in terms of their 1,3-PDO productivity under pH controlled conditions. Higher 1,3-PDO production was achieved under pH controlled fermentation conditions (pH = 7) for both microorganisms. Even though the two microorganisms had almost the same 1,3-PDO yield (0.60 mol/mol for C. beijerinckii, 0.61 mol/mol for K. pneumoniae) at the end of fermentation period, K. pneumoniae completed the 1,3-PDO production in one-third of the time (t = 8 h with a productivity of 1.34 g/L/h) than C. beijerinckii (t = 24 h). The results of this study clearly indicated that a substrate inhibition is a challenge that needs to be studied further for higher productivities.     

小断面锚网支护工作面上下隅角安全问题的探讨

利用事故树对小断面锚网支护方式下,上下隅角的安全问题进行了分析,求出了最小割集和基本事件的结构重要度,提出了防止事故的方案,并在现场应用中取得了良好的效果。     

Characterization of the Leachate in an Urban Landfill by Physicochemical Analysis and Solid Phase Microextraction-GC/MS

The aim of this study is to evaluate extensively the characterization and identification of major pollutant parameters by paying attention to the organic chemical pollution for unregulated dumping site leachate in Eskişehir/Turkey. The study that is first and only one research has been very important data related with before new sanitary landfill site in Eskişehir city. For this purpose, in this study leachate samples were collected in-situ at monthly interval for a period of 8 months. Firstly, thirty three physicochemical parameters were monitored. Secondly, SPME technique was used for identification of organic pollutants. Meteorological data were also recorded for the same sampling period to correlate meteorological data and physicochemical parameters. Mean values are used in the correlation analysis. Correlation is shown only for the relationship between air temperature and NO₃ ⁻. No correlation has been found between rain and leachate quality parameters since the amount of rain was very low during the sampling period. However, analysis results were generally decreased in winter season when each parameter and each sampling point are examined separately. According to correlation between every parameter, especially solid content and dissolved oxygen concentration of leachate is affecting to other parameters. Also, sodium and potassium are changing proportionally with same parameters (suspended solids, fixed solids, dissolved oxygen) and high correlation between chloride and heavy metal concentration is showing. The results were statistically evaluated by use of SPSS 10.0 program. Second part of the study, the leachate was extracted by Solid Phase Microextraction (SPME) technique and then analyzed. Of the methodologies tested in this study, the best one selected was based on 100 μ m polydimethylsiloxane coated fiber (PDMS), headspace with heating (Δ HS) sampling mode and an extraction time of 15 min. at a temperature of 50 ^o C. Thirty three organic compounds in leachate were identified by GC/MS.